{"product_id":"d-88w-1k-pu-abdichtung-fur-aussen","title":"D.88W 1K PU Liquid Waterproofing Membrane for Exterior Use","description":"\u003cp\u003e\u003c!-- x-tinymce\/html --\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e1K PU waterproofing in grey \u003c\/strong\u003e\u003cstrong\u003efor exterior use - \u003c\/strong\u003efast-curing, solvent-based, latest-generation 1K polyurethane liquid plastic. For fleece-free detail waterproofing outdoors. The \"Humidity Activated Accellerator\" technology enables a bubble-free, cold-processable, and cold-curing polyurethane membrane.\u003c\/p\u003e\n\n\u003cp\u003eThe D.88W liquid plastic waterproofing and coating system is weather-, UV-, and hydrolysis-resistant, thus ensuring permanent protection of the building fabric. The proven technology of polyurethane in combination with the new catalyst system now enables us to incorporate the moisture-reactive catalyst. This cross-links very quickly even in thick layer thicknesses with the moisture of the environment to form a bubble-free membrane.\u003c\/p\u003e\n\n\u003cp\u003eWaterproofing for flat roofs and other surfaces on concrete, screed, reinforced concrete, steel, stainless steel, tiles, bitumen* and membrane renovation (EPDM, PVC FPO \/ TPO) as well as waterproofing and detail waterproofing for balconies, terraces, in timber construction, for railing supports, etc.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCertified waterproofing system\u003c\/strong\u003e - \u003cstrong\u003eETAG 005 approval, W3\u003c\/strong\u003e.: Technical approvals for liquid-applied waterproofing. Meets the highest requirement level for service life.\u003c\/p\u003e\n\n\u003cp\u003e+ bubble- and defect-free surfaces\u003cbr\u003e\n+ rapid through-curing\u003cbr\u003e\n+ weather- and UV-resistant\u003cbr\u003e\n+ continuously load-bearing up to +90°C. 200°C shock temperature.\u003cbr\u003e\n+ excellent mechanical properties due to high stretchability, tensile and tear strength\u003cbr\u003e\n+ good chemical resistance\u003cbr\u003e\n+ vapor-permeable membrane\u003cbr\u003e\n+ for airless application, it can be diluted with LS-711 by 5-10%\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMatching auxiliary products\u003c\/strong\u003e\u003cbr\u003e\n- BEKATEQ BK-637PU 1K PU primer for exterior use\u003cbr\u003e\n- BEKATEQ BK-636PU 2K PU primer for bitumen or asphalt\u003cbr\u003e\n- DICHTON D.89W 1K PU waterproofing exterior fiber-reinforced\u003cbr\u003e\n- BE-79W short-pile paint roller\u003cbr\u003e\n- BK-705 quartz sand for sprinkling\u003cbr\u003e\n- LS-711 thinner\u003cbr\u003e\n- BE-800 floor cleaner\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAreas of application\u003c\/strong\u003e\u003cbr\u003e\n- Flat roof waterproofing\u003cbr\u003e\n- Basement and foundation waterproofing\u003cbr\u003e\n- Insulation in roof, wall, and basement areas\u003cbr\u003e\n- Floor coatings indoors and outdoors\u003cbr\u003e\n- Waterproofing in sanitary areas (e.g. showers, etc.)\u003cbr\u003e\n- Pool, drinking water, and container coatings\u003cbr\u003e\n- Crack injection\u003cbr\u003e\n- Highly elastic joint sealants\u003cbr\u003e\n- Stone resin flooring for indoor and outdoor areas\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDetail waterproofing \/ waterproofing of complex components\u003c\/strong\u003e\u003cbr\u003e\n- Wall and floor connections\u003cbr\u003e\n- Pipe penetrations\u003cbr\u003e\n- Skylights\u003cbr\u003e\n- Connections\u003cbr\u003e\n- Sleeves and corners\u003cbr\u003e\n- Flashing frames\u003cbr\u003e\n- Gutters\u003cbr\u003e\n- Piping\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\n- Consumption: min. 1.5kg\/sqm, for commercial use 2.6kg\/sqm is recommended\u003cbr\u003e\n- Application temperature +5 to +35°C\u003cbr\u003e\n- Dew point: the temperature must be min. \u0026gt;3°C above the dew point\u003cbr\u003e\n- Application: brush, squeegee, paint roller, or airless application\u003cbr\u003e\n- Drying time at 20-25°C: Tack-free after approx. 2-3 hrs \/ Recoatable after approx. 6-12 hrs.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e: Substrates must be load-bearing, free of separating layers, cracks, loose parts, voids, and burrs. Remove grease, wax, cement slurry, and all other adhesion-reducing substrates. Grind the substrate using diamond grinding discs, sand, or shot blast. Load-bearing bituminous substrates as well as membranes (EPDM, PVC, FPO \/ TPO) must be thoroughly cleaned with a high-pressure water jet beforehand. Then the substrates are treated with the BK-637PU 1K PU primer or the BK-636PU 2K PU primer for bituminous substrates.\u003cbr\u003e\nAdhesion pull-off and compression strength \u0026gt;1.5N\/mm²\u003cbr\u003e\nMoisture in the substrate \u0026lt; 5%\u003cbr\u003e\nRelative ambient humidity \u0026lt; 80%\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: Wear appropriate protective clothing during application, such as: safety goggles, disposable gloves, and if necessary, respiratory protection masks. For airless application, add 5-10% LS-711 thinner beforehand and mix it in using a dissolver. Apply the material evenly. Depending on the levelness and roughness of the substrate, min. 1.5kg\/sqm is required. Apply approx. 2\/3 of the quantity in the first coat. Apply the rest wet-on-wet until it is glossy. \u003c\/p\u003e\n\n\u003cp\u003eIf you are working according to the European waterproofing standard, you need 2.6kg\/sqm. Optionally, you can embed our system fleece bubble- and wrinkle-free. Recoat the system fleece wet-on-wet with the remaining quantity until it is glossy. Matte surfaces indicate too thin a layer thickness. If you want to recoat the D.89W, this layer must be sanded with sandpaper.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"2x 1kg","offer_id":59897359499598,"sku":"D88W00002","price":46.0,"currency_code":"CHF","in_stock":true},{"title":"1kg","offer_id":55316445102414,"sku":"D88W00001","price":31.0,"currency_code":"CHF","in_stock":true},{"title":"6 kg","offer_id":55316456931662,"sku":"D88W00006","price":111.0,"currency_code":"CHF","in_stock":true},{"title":"3x 1kg","offer_id":59897359532366,"sku":"D88W00003","price":64.0,"currency_code":"CHF","in_stock":true},{"title":"5x 1kg","offer_id":59897359565134,"sku":"D88W00005","price":102.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/bekateq2500x2500bekfinalkopie78892dda-0c58-45b6-9439-a950084f78e9jpg-356284.jpg?v=1770299973","url":"https:\/\/www.bekateq.de\/en-ch\/products\/d-88w-1k-pu-abdichtung-fur-aussen","provider":"BEKATEQ","version":"1.0","type":"link"}