{"product_id":"d-89w-1k-pu-abdichtung-faserverstarkt-fur-aussen","title":"D.89W 1K PU waterproofing liquid plastic fiber-reinforced for exterior use","description":"\u003cp\u003e\u003cstrong\u003e1K PU waterproofing in grey \u003c\/strong\u003e\u003cstrong\u003efiber-reinforced for exterior use - \u003c\/strong\u003efast-curing, solvent-based, fiber-reinforced, 1K liquid polyurethane of the latest generation with integrated glass fiber reinforcement. For fleece-free detail waterproofing in outdoor areas. The \"Humidity Activated Accellerator\" technology enables a bubble-free, cold-processable and cold-curing polyurethane membrane.\u003c\/p\u003e\n\n\u003cp\u003eThe D.89W liquid plastic waterproofing and coating system is weather-, UV- and hydrolysis-resistant, thus ensuring permanent protection of the building fabric. The reinforced technology of polyurethane in combination with the new catalyst system now enables us to incorporate the moisture-reactive catalyst. This cross-links very quickly with the moisture of the environment even in thick layer thicknesses to form a bubble-free membrane.\u003c\/p\u003e\n\n\u003cp\u003eWaterproofing for flat roofs and other surfaces on concrete, screed, reinforced concrete, steel, stainless steel, tiles, bitumen* and membrane repair (EPDM, PVC FPO \/ TPO) as well as waterproofing and detail waterproofing for balconies, terraces, in timber construction, for railing supports, etc.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCertified waterproofing system\u003c\/strong\u003e - \u003cstrong\u003eETAG 005 approval, W3\u003c\/strong\u003e.: Technical approvals for liquid-applied waterproofing. Meets the highest requirement level for service life.\u003c\/p\u003e\n\n\u003cp\u003e+ bubble- and defect-free surfaces\u003cbr\u003e\n+ rapid through-curing\u003cbr\u003e\n+ weather- and UV-resistant\u003cbr\u003e\n+ permanently load-resistant up to +90°C. 200°C shock temperature.\u003cbr\u003e\n+ excellent mechanical properties due to high stretchability, tensile and tear strength\u003cbr\u003e\n+ good chemical resistance\u003cbr\u003e\n+ vapor-permeable membrane\u003cbr\u003e\n+ for airless application, it can be thinned with LS-711 by 5-10%\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMatching additional products\u003c\/strong\u003e\u003cbr\u003e\n- BEKATEQ BK-637PU 1K PU primer for exterior use\u003cbr\u003e\n- BEKATEQ BK-636PU 2K PU primer for bitumen or asphalt\u003cbr\u003e\n- DICHTON D.88W 1K PU waterproofing for exterior use\u003cbr\u003e\n- BE-79W short-pile paint roller\u003cbr\u003e\n- BK-705 quartz sand for sprinkling\u003cbr\u003e\n- LS-711 thinner\u003cbr\u003e\n- BE-800 floor cleaner\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAreas of application\u003c\/strong\u003e\u003cbr\u003e\n- Flat roof waterproofing\u003cbr\u003e\n- Basement and foundation waterproofing\u003cbr\u003e\n- Insulation in roof, wall and basement areas\u003cbr\u003e\n- Floor coatings for indoor and outdoor areas\u003cbr\u003e\n- Waterproofing in sanitary areas (e.g. showers, etc.)\u003cbr\u003e\n- Pool, drinking water and container coatings\u003cbr\u003e\n- Crack injection\u003cbr\u003e\n- Highly elastic joint sealants\u003cbr\u003e\n- Stone resin flooring for indoor and outdoor areas\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDetail waterproofing \/ waterproofing of complex components\u003c\/strong\u003e\u003cbr\u003e\n- Wall and floor connections\u003cbr\u003e\n- Pipe penetrations\u003cbr\u003e\n- Skylights\u003cbr\u003e\n- Connections\u003cbr\u003e\n- Sleeves and corners\u003cbr\u003e\n- Flashing frames\u003cbr\u003e\n- Gutters\u003cbr\u003e\n- Piping\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\n- Consumption: min. 1.5kg\/sqm, for commercial use 2.6kg\/sqm is recommended\u003cbr\u003e\n- Application temperature +5 to +35°C\u003cbr\u003e\n- Dew point: the temperature must be at least \u0026amp;gt;3°C above the dew point\u003cbr\u003e\n- Application: brush, squeegee, paint roller or airless application\u003cbr\u003e\n- Drying time at 20-25°C: Tack-free after approx. 2-3 hrs \/ Recoatable after approx. 6-12 hrs.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e: Substrates must be load-bearing, free from separating layers, cracks, loose parts, voids and burrs. Remove grease, wax, cement slurry and all other adhesion-reducing substrates. Grind the substrate using diamond grinding discs, sand or shot blast. Load-bearing bituminous substrates as well as membranes (EPDM, PVC, FPO \/ TPO) must be thoroughly cleaned with a high-pressure water jet beforehand. Afterwards, the substrates are treated with the BK-637PU 1K PU primer or the BK-636PU 2K PU primer for bituminous substrates.\u003cbr\u003e\nAdhesion pull-off and compression strength \u0026gt;1.5N\/mm²\u003cbr\u003e\nMoisture in the substrate \u0026lt; 5%\u003cbr\u003e\nRelative ambient humidity \u0026lt; 80%\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: During application, wear appropriate protective clothing such as: safety goggles, disposable gloves, and if necessary, respiratory protection masks. For airless application, add 5-10% LS-711 thinner beforehand and mix it in using a dissolver. Apply the material evenly. Depending on the levelness and roughness of the substrate, at least 1.5kg\/sqm is required. Apply approx. 2\/3 of the quantity in the first coat. Apply the remainder wet-on-wet until it is glossy. \u003c\/p\u003e\n\n\u003cp\u003eIf you are working according to the European waterproofing standard, you need 2.6kg\/sqm. Optionally, you can embed our system fleece bubble- and wrinkle-free. Overcoat the system fleece wet-on-wet with the remaining quantity until it is glossy. Matte surfaces indicate too low a layer thickness. If you wish to recoat the D.89W, this layer must be sanded with sandpaper.\u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"2 x 1kg","offer_id":55311159591246,"sku":"D89W-2","price":47.0,"currency_code":"CHF","in_stock":true},{"title":"5kg","offer_id":55311159689550,"sku":"D89W-6","price":102.0,"currency_code":"CHF","in_stock":true},{"title":"1kg","offer_id":55311159394638,"sku":"D89W-1","price":33.0,"currency_code":"CHF","in_stock":true},{"title":"3 x 1kg","offer_id":55311159525710,"sku":"D89W-3","price":66.0,"currency_code":"CHF","in_stock":true},{"title":"4 x 1kg","offer_id":59489014579534,"sku":"D89W-5","price":83.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/bekateq2500x2500bekfinalkopie5a20d289-6cf1-4344-b1bf-283837f44636jpg-376643.jpg?v=1774873470","url":"https:\/\/www.bekateq.de\/en-ch\/products\/d-89w-1k-pu-abdichtung-faserverstarkt-fur-aussen","provider":"BEKATEQ","version":"1.0","type":"link"}