{"title":"Fillers \u0026 Plaster","description":"","products":[{"product_id":"bk-150ep-epoxidharzmoertel-reparaturmoertel","title":"BK-150EP Epoxy Resin Mortar Repair Mortar","description":"\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eEpoxy resin mortar\u003c\/strong\u003e as a repair mortar on an epoxy resin basis, ideally suited for spalls, holes, and defects in concrete and screed. Thanks to the high mechanical load capacity of up to 3 t\/sqm, the epoxy resin mortar is resistant to pallet trucks and forklifts.\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003eThe special properties of the epoxy resin make the mortar resistant to oils, greases, de-icing salts, acids, and alkalis. The epoxy resin mortar is also suitable as a leveling layer on uneven surfaces. The mixed epoxy resin mortar can be poured into defects and flows practically by itself.\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003eIn addition to industrial halls, for example, for repairing unevenness, larger holes, and damage, or for leveling, the epoxy mortar also finds its place in the private sector, for example, for repairing cracks in garage screed floors, stairs, or basement floors. It is also suitable for repairing curbs or grouting paving stones. This reliably prevents weed growth.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eScope of delivery: You will receive the epoxy resin, quartz sand, and hardener delivered separately. The resin and hardener are in a separate bottle\/container. First, the epoxy resin is mixed with the quartz sand for several minutes using a mixer paddle and cordless drill until a homogeneous mixture has formed. Then the hardener is added and stirred again for several minutes until you also have a homogeneous mixture. The individual components are matched to each other. If you want to mix small quantities, you must measure them out by weight.\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003eIdeally suited as floor preparation for subsequent floor coatings with the BK-190EP primer and then the BE-702 epoxy resin coating!\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eRecommended additional products\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- BK-190EP 2K epoxy resin primer - adhesion promoter and absorption compensation\u003cbr\u003e\n- BE-702 2K epoxy resin floor coating - 2K colored floor paint\u003cbr\u003e\n- BK-400EP 2K epoxy resin sealer - 2K colorless floor sealer\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eSuitable for floor surfaces in:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- Chemical plants\u003cbr\u003e\n- Car wash halls\u003cbr\u003e\n- Bathrooms\u003cbr\u003e\n- Commercial kitchens\u003cbr\u003e\n- Workshops\u003cbr\u003e\n- Garages, etc.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFor vertical surfaces, we recommend our \u003cstrong\u003eBK-110EP fine filler.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eProperties of BK-150EP 2K epoxy resin mortar\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- Frost-resistant and waterproof\u003cbr\u003e\n- Highly resistant to mechanical loads\u003cbr\u003e\n- No flaking or cracking\u003cbr\u003e\n- Easy to apply\u003cbr\u003e\n- Robust, strong, chemical-resistant, plasticizer-resistant\u003cbr\u003e\n- Load capacity up to 3 t\/sqm\u003cbr\u003e\n- High stability\u003cbr\u003e\n- Thin and thick layer thicknesses possible\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- Color: sand color\u003cbr\u003e\n- Drying: walkable after approx. 1 day at 20°C\u003cbr\u003e\n- Mechanical load capacity: after approx. 7 days at 20°C\u003cbr\u003e\n- Consumption: depending on the application and the size of the repair area\u003cbr\u003e\n- Application temperature: min. 6-10°C - max. 30°C\u003cbr\u003e\n- Pot life: approx. 30 min.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003eSurfaces must be free of dust, oil, and grease and \/ or contain no other adhesion-reducing or loose particles. Add the hardener to the mortar mixture and mix for approx. 2-3 minutes with a mixer paddle, then trowel on with a smoothing trowel.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eCement mortar and epoxy resin mortar compared\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003eCement mortar is probably the best-known mortar and is therefore also widely used. However, epoxy resin mortar has numerous advantages. The 2-component epoxy resin mortar is waterproof and frost-resistant. In addition, the EP mortar is highly resistant to mechanical loads, with up to 3 t\/sqm. Cement mortar would flake off or crumble again in no time under such mechanical loads. Repair areas (e.g., driven-over surfaces) or unevenness can be repaired without any problems. Furthermore, the fully cured epoxy resin mortar is resistant to chemical exposure, de-icing salt solutions, oils, greases, fuels, and a variety of mineral and diluted acids. Epoxy resin mortar is also easy to apply. Synthetic resin mortar is clearly the better choice.\u003c\/span\u003e\u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"1kg","offer_id":47655178076494,"sku":"182864613","price":23.9,"currency_code":"EUR","in_stock":true},{"title":"5kg","offer_id":47605611004238,"sku":"182864614","price":49.9,"currency_code":"EUR","in_stock":true},{"title":"10kg","offer_id":47655178010958,"sku":"182864615","price":79.9,"currency_code":"EUR","in_stock":true},{"title":"2x 10kg","offer_id":47655178043726,"sku":"182864616","price":154.9,"currency_code":"EUR","in_stock":true},{"title":"3x 10kg","offer_id":54547010781518,"sku":"15000030","price":229.9,"currency_code":"EUR","in_stock":true},{"title":"4x 10kg","offer_id":54547010847054,"sku":"15000040","price":304.9,"currency_code":"EUR","in_stock":true},{"title":"5x 10kg","offer_id":54547010912590,"sku":"15000050","price":387.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/BK-150EP_Produktbild.jpg?v=1786609006"},{"product_id":"bk-110ep-feinspachtel-2k-epoxidharz-spachtelmasse-raparaturspachtel","title":"BK-110EP Fine Putty 2K Epoxy Resin Putty, Repair Putty","description":"\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eThe \u003cstrong\u003efine filler \u003c\/strong\u003eon an \u003cstrong\u003eepoxy resin \u003c\/strong\u003ebase is suitable for filling smaller imperfections and applying thin coats of fine filler to pre-treated surfaces. Thanks to its special properties, the epoxy resin-based fine filler is universally applicable, e.g. \u003cstrong\u003ethroughout the automotive sector, for all bodywork,\u003c\/strong\u003e in model making, for repairing cracks or holes in screed or concrete, and much more.\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003eIt is particularly popular\u003cstrong\u003e in boat building.\u003c\/strong\u003e The micro-fine fillers in the compound result in a very smooth surface. Thanks to its easy application and short curing time, further work can be carried out quickly. Several coats can also be applied one after the other.\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eThe filler compound provides good adhesion to: steel, iron, aluminum, metal, fiberglass, concrete, tiles, screed, wood.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIMPORTANT for the automotive sector: can be sanded down to 0, therefore no edges or transitions in the finished result.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eAreas of application\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- Boat repair\u003cbr\u003e\n- Car repair\u003cbr\u003e\n- All bodywork\u003cbr\u003e\n- Motorcycle repair\u003cbr\u003e\n- Wood repairs\u003cbr\u003e\n- Fiberglass conversions exposed to heavy vibrations\u003cbr\u003e\n- Floor repairs (concrete, screed)\u003cbr\u003e\n- Removal of osmosis damage on fiberglass boats\u003cbr\u003e\n- Model making\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eProduct properties BK-110EP fine filler on an epoxy resin base\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- Fast-curing and water-resistant\u003cbr\u003e\n- Can be sanded down to 0, therefore no edges or transitions\u003cbr\u003e\n- Filling and repairing screed\u003cbr\u003e\n- Floor repairs for cracks or holes\u003cbr\u003e\n- Pinhole-free and easily sandable surface\u003cbr\u003e\n- Smoothing of scratches and imperfections\u003cbr\u003e\n- Finishing of pre-filled damaged areas\u003cbr\u003e\n- Easy application\u003cbr\u003e\n- Cures without cracking\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- Mixing ratio: 3 parts gray filler + 1 part red hardener\u003cbr\u003e\n- Working time at 20°C approx. 30 min.\u003cbr\u003e\n- Can be reworked and sanded after approx. 24 hours at 20°C\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\nMeasure out the filler (Component A) and hardener (Component B) in the correct mixing ratio and mix thoroughly. As a rule, the repair area can be sanded after the next day (depending on the temperatures). Further filling work or subsequent coats can then be carried out. Always sand the filler coat before the next working step.\u003cbr\u003e\n\u003cbr\u003e\nThe base and hardener must be mixed evenly together. Only mix the amount that can be used immediately. Do not apply layers that are too thick at once. Two, three, or more coats are better than one layer that is too thick. Applying thick layers extends the drying times!\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eThe consistency of the fine filler is highly dependent on the temperatures.\u003c\/strong\u003e\u003cbr\u003e\nAt low temperatures, the filler and\/or hardener may become viscous. In such a case, bring both components to room temperature before application, either by placing them in a warm bath or on a heater. This ensures trouble-free application. \u003c\/span\u003e\u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"0.75kg","offer_id":48890827833678,"sku":"182793408","price":24.9,"currency_code":"EUR","in_stock":true},{"title":"1.5kg","offer_id":47652263297358,"sku":"182793409","price":37.9,"currency_code":"EUR","in_stock":true},{"title":"3kg","offer_id":48890827964750,"sku":"182793410","price":57.9,"currency_code":"EUR","in_stock":true},{"title":"4.5kg","offer_id":48890828030286,"sku":"182793411","price":77.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/BK-110EP_Produktbild.jpg?v=1786609005"},{"product_id":"d-30w-flussigfolie-mit-farbrolle-set","title":"D.30W Liquid Membrane Waterproofing for Floors \u0026 Walls","description":"\u003cp\u003e\u003c!-- x-tinymce\/html --\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eLiquid membrane\u003c\/strong\u003e, a single-component, solvent-free, and waterproof waterproofing membrane for subsequent ceramic floor coverings such as tiles. Ideal for wet areas. Can be applied to floors and wall surfaces indoors. The liquid membrane forms a tight and elastic floor \u0026amp; wall coating. Fine cracks and joints are bridged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct data\u003c\/strong\u003e\u003cbr\u003e\n- Solvent-free\u003cbr\u003e\n- Highly elastic\u003cbr\u003e\n- High adhesion strength\u003cbr\u003e\n- Silicone compatible\u003cbr\u003e\n- For full-surface waterproofing\u003cbr\u003e\n- Ideal for wet areas\u003cbr\u003e\n- Suitable for underfloor heating\u003cbr\u003e\n- Water-impermeable\u003cbr\u003e\n- For walls and floors\u003cbr\u003e\n- Very good crack bridging\u003cbr\u003e\n- Perfect application thickness\u003cbr\u003e\n- Viscous sealing compound\u003cbr\u003e\n- Easy application (paint roller included)\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInteresting additional products\u003c\/strong\u003e\u003cbr\u003e\n- BEKATEQ BE-518 deep primer for absorbent substrates\u003cbr\u003e\n- BEKATEQ BK-180 whitish adhesion primer for smooth substrates\u003cbr\u003e\n- BEKATEQ BK-155 quartz primer ideal for smooth substrates\u003cbr\u003e\n- BEKATEQ BK-165 concrete primer ideal for smooth substrates\u003cbr\u003e\n- BEKATEQ BK-110EP 2K epoxy fine filler for walls and especially floor surfaces\u003cbr\u003e\n- DICHTON D.50W 1-component ready-mixed filler for wall surfaces\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003cbr\u003e\n- Color: Gray\u003cbr\u003e\n- Density: approx. 1.50kg\/dm3\u003cbr\u003e\n- Application: Rolling, brushing, troweling\u003cbr\u003e\n- Number of coats: at least 2 (3 recommended)\u003cbr\u003e\n- Material consumption: 0.4kg to 0.7kg\/sqm per coat depending on the substrate\u003cbr\u003e\n- Drying time\/recoat time: after approx. 4 hrs at 20°C\u003cbr\u003e\n- Drying of the final coat: approx. 24 hrs\u003cbr\u003e\n- Application temperature: approx. +5°C to +30°C\u003cbr\u003e\n- Cleaning of tools: with water\u003cbr\u003e\n- Storage: approx. +5°C to +30°C\u003c\/p\u003e\n\n\u003cp\u003eThe drying times refer to 23°C and 50% relative humidity. Higher temperatures and lower humidity shorten the drying time, lower temperatures and higher humidity extend it.\u003c\/p\u003e\n\n\u003cp\u003eSuitable for non-absorbent but also for absorbent substrates indoors. The product can be used on concrete, aerated concrete, gypsum and cement plaster, gypsum and gypsum fiberboard, as well as fully dried screed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: Apply DICHTON liquid membrane in two coats evenly to the prepared substrate. First seal expansion joints, corners, pipe penetrations, and floor drains with special sealing tape, corners, or sleeves, and embed them in the mortar. Apply the liquid membrane to the entire surface with a paint roller, painter's brush, brush, or steel trowel and rub it intensively into the substrate. The thickness of the individual wet coats should not exceed max. 1 mm. Apply the next coat after the previous one has dried. The layer thickness of the finished coating should be at least 1 mm. Protect the freshly applied waterproofing layer from drying out too quickly and damage during further processing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e: The substrate must be firm, dry, level, clean, crack-free, load-bearing, and free of all substances that could impair adhesion (such as dust, oil, loose paint residues, etc.). Substrates with underfloor heating must be sufficiently heated beforehand (gypsum substrate below 0.5 % CM, cement substrate below 2 % CM). Trowel out larger unevenness with a suitable product. Treat substrates with the corresponding BEKATEQ primer. Absorbent substrates: BEKATEQ BE-518 deep primer - non-absorbent\/smooth substrates: BEKATEQ BK-180 adhesion primer or BEKATEQ BK-165 concrete primer. Allow the primer to dry completely. Do not use in areas exposed to constant contact with water and rising moisture from the substrate.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"7 kg","offer_id":49267969556814,"sku":"182793129","price":44.9,"currency_code":"EUR","in_stock":true},{"title":"12 kg","offer_id":49267952681294,"sku":"182793130","price":67.9,"currency_code":"EUR","in_stock":true},{"title":"5.5kg","offer_id":49267939606862,"sku":"182793128","price":42.9,"currency_code":"EUR","in_stock":true},{"title":"4kg","offer_id":49267918111054,"sku":"182793127","price":29.9,"currency_code":"EUR","in_stock":true},{"title":"1.5kg","offer_id":49267854377294,"sku":"182793126","price":18.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/farbeimerkopie12a36506-c1d5-4c56-a0ba-24099e4b8b65jpg-6084.jpg?v=1767353380"},{"product_id":"d-50w-fertigspachtel-weiss-mit-spachtel","title":"D.50W 2-in-1 Ready-Mixed Filler for Super-Smooth Surfaces","description":"\u003cp\u003e\u003cstrong\u003e2-in-1 finishing filler\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eOne-component finishing filler in a beautiful white. Creates super-smooth surfaces on interior walls and ceilings. Dries quickly. The fine filler is also suitable for rooms with increased humidity. The filler can be applied by hand or machine.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct data\u003c\/strong\u003e\u003cbr\u003e\n- Wet application possible\u003cbr\u003e\n- Suitable for rooms with increased humidity\u003cbr\u003e\n- Highly flexible\u003cbr\u003e\n- Water-resistant\u003cbr\u003e\n- Easy to sand\u003cbr\u003e\n- High adhesion\u003cbr\u003e\n- Fast-drying\u003cbr\u003e\n- Solvent-free\u003cbr\u003e\n- Crack-resistant\u003cbr\u003e\n- Easy to apply\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\n- Color shade: white\u003cbr\u003e\n- Quality levels: Q1 to Q4\u003cbr\u003e\n- Application: filler\u003cbr\u003e\n- Material consumption: approx. 1 kg\/m² per 1 mm layer thickness, depending on the type of substrate\u003cbr\u003e\n- Drying time: approx. 6 hours (1 mm layer thickness)\u003cbr\u003e\n- Application temperature: from +5°C to +25°C\u003cbr\u003e\n- Shelf life: approx. 12 months\u003cbr\u003e\n- Tool cleaning: with water\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInteresting additional products\u003c\/strong\u003e\u003cbr\u003e\n- BEKATEQ BE-518 deep primer for absorbent substrates\u003cbr\u003e\n- BEKATEQ BK-180 whitish bonding primer for smooth substrates\u003cbr\u003e\n- BEKATEQ BK-155 quartz primer ideal for smooth substrates but also for subsequent filler work\u003cbr\u003e\n- BEKATEQ BK-165 concrete bonding primer ideal for smooth substrates but also for subsequent filler work\u003cbr\u003e\n- BEKATEQ BK-110EP 2K epoxy fine filler for walls and especially floor surfaces\u003cbr\u003e\n- DICHTON D.30W liquid membrane for wall \u0026amp; floor surfaces\u003c\/p\u003e\n\n\u003cp\u003eSuitable for non-absorbent but also for absorbent substrates indoors. The product can be used on concrete, screed, aerated concrete, plaster, and cement plaster, gypsum and gypsum fiberboard, wood, paper, lacquered\/painted surfaces.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: The filler is sprayed or applied evenly with a smoothing trowel. A maximum layer thickness of 2 mm can be applied in one operation. The finishing filler can also be sprayed with suitable airless equipment (if necessary, the finishing filler can be diluted with a maximum of 5% water). After the previous coat has dried, apply another coat if necessary. Sand the fully dried surface with a sanding screen or sandpaper. Wear safety goggles and a dust mask during sanding. Dust off the sanded surfaces and prime. In wet application (dust-free application), after the initial setting of the filler layer, after about 3 hours, finish with a sponge trowel. If necessary, lightly spray with clean water immediately before working.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e: The substrate should be sufficiently load-bearing and cleaned accordingly, i.e., all layers that can reduce adhesion must be removed. Absorbent substrates made of lime-cement plaster, gypsum plaster, and gypsum fiberboard should\u003cbr\u003e\nbe primed with a suitable BEKATEQ primer (BE-518, BK-155, BK-165, etc.).\u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"15 kg","offer_id":49268045709646,"sku":"182793125","price":52.9,"currency_code":"EUR","in_stock":true},{"title":"10kg","offer_id":49268028637518,"sku":"182793124","price":37.9,"currency_code":"EUR","in_stock":true},{"title":"5kg","offer_id":49268003537230,"sku":"182793123","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/farbeimerkopiee945fa14-5abe-4ac4-9f19-0c356a6d55a7jpg-6086.jpg?v=1767353401"},{"product_id":"d-60w-fertigspachtel-weiss-in-der-tube-inkl-japanspachtel","title":"D.60W fine filler white in tube incl. Japan knife","description":"\u003cdiv class=\"celwidget\" data-cel-widget=\"productDescription_feature_div\" data-csa-c-asin=\"\" data-csa-c-content-id=\"productDescription\" data-csa-c-id=\"26l1wg-746zyd-fu5d8w-kb1ezw\" data-csa-c-is-in-initial-active-row=\"false\" data-csa-c-slot-id=\"productDescription_feature_div\" data-csa-c-type=\"widget\" data-feature-name=\"productDescription\" id=\"productDescription_feature_div\"\u003e\n\n\u003cdiv\u003e\n\n\u003cdiv class=\"a-row feature\" data-cel-widget=\"productDescription_feature_div\" data-feature-name=\"productDescription\" data-template-name=\"productDescription\" id=\"productDescription_feature_div\"\u003e\n\n\u003cdiv class=\"a-section a-spacing-small\" id=\"productDescription\"\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFine filler in \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ewhite for interior and exterior use\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nFor repairing and filling holes and uneven surfaces. Excellent adhesion and filling properties. Ready to use, apply directly from the tube into the hole; no need to roll over.\u003cbr\u003e\n\u003cbr\u003e\nThe fine filler is a fast-drying 1K acrylic filler for leveling minor damage indoors and outdoors, e.g. cracks, holes, joints and gaps in wall surfaces. The applied filler thickness should not exceed 1 to 4 mm; apply thicker layers in multiple coats.\u003cbr\u003e\n\u003cbr\u003e\nSuitable for use on mineral substrates such as concrete, plaster and many more, wood and painted surfaces.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eProduct data\u003c\/strong\u003e\u003cbr\u003e\n- Fast-drying\u003cbr\u003e\n- Ready to use\u003cbr\u003e\n- Apply directly from the tube into the hole\u003cbr\u003e\n- Solvent-free\u003cbr\u003e\n- Odourless\u003cbr\u003e\n- Paintable\u003cbr\u003e\n- Water-dilutable\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eAdditional products\u003c\/strong\u003e\u003cbr\u003e\n- D.50W ready-mixed filler\u003cbr\u003e\n- D.70W Innenmat wall paint\u003cbr\u003e\n- D.73W Innenplus wall paint\u003cbr\u003e\n- D.77W Innenpremium wall paint\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\n- Colour: white\u003cbr\u003e\n- Drying time: approx. 1-2 hours at 20°C\u003cbr\u003e\n- Coverage: depending on the substrate\u003cbr\u003e\n- Storage: store in a dry and frost-free place, shelf life: min. 12 months\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eAdditional information\u003c\/strong\u003e: May cause allergic reactions. Keep out of reach of children. Avoid contact with skin. Please refer to the technical data sheet and safety data sheet, available on request from your dealer.\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n","brand":"DICHTON","offers":[{"title":"1x 300g","offer_id":50917366333774,"sku":"182792969","price":2.95,"currency_code":"EUR","in_stock":true},{"title":"3x 300g","offer_id":50917366399310,"sku":"182792971","price":12.95,"currency_code":"EUR","in_stock":true},{"title":"2x 300g","offer_id":50917366366542,"sku":"182792970","price":7.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/farbeimerkopiee48b59a5-faad-425c-82e1-abc0eb7bd0e3jpg-6298.jpg?v=1769157043"},{"product_id":"be-77w","title":"BE-77W Telescopic Pole for Paint Roller","description":"\u003cdiv class=\"celwidget pd_rd_w-lBKk2 pd_rd_r-0GCJ0RM5CNGFJ1EX8NXG pd_rd_wg-nFAdU\" data-cel-widget=\"productDescription_feature_div\" data-csa-c-asin=\"B0DQ1YMTQ4\" data-csa-c-content-id=\"productDescription-3\" data-csa-c-id=\"83w03z-1pcer4-5m38ke-9100o5\" data-csa-c-is-in-initial-active-row=\"false\" data-csa-c-slot-id=\"productDescription_feature_div\" data-csa-c-type=\"widget\" data-feature-name=\"productDescription-3\" id=\"productDescription_feature_div\"\u003e\n\n\u003cdiv\u003e\n\n\u003cdiv class=\"a-row feature\" data-cel-widget=\"productDescription_feature_div\" data-feature-name=\"productDescription\" data-template-name=\"productDescription\" id=\"productDescription_feature_div\"\u003e\n\n\u003cdiv class=\"a-section a-spacing-small\" id=\"productDescription\"\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTelescopic pole \u003c\/strong\u003emade of powder-coated steel, with internal thread and plastic handle. Choose from various sets. We also offer high-quality paints, varnishes, resin-bound gravel sets, epoxy and PU resins, and much more for various applications and surfaces indoors and outdoors.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eBEKATEQ paints and varnishes:\u003c\/strong\u003e\u003cbr\u003e\nMetal protection varnish 4-in-1 - LS-570\u003cbr\u003e\nRoad marking paint - LS-820\u003cbr\u003e\nSwimming pool paint - LS-400\u003cbr\u003e\nFloor paint - BE-700\u003cbr\u003e\nFloor paint FIX - BE-675\u003cbr\u003e\nRoof paint - BE-510\u003cbr\u003e\nConcrete paint - LS-470\u003cbr\u003e\nTile varnish - BE-713\u003cbr\u003e\n2K epoxy floor coating - BE-702\u003cbr\u003e\n2K epoxy balcony coating - BK-300EP\u003cbr\u003e\n2K epoxy tile varnish - BK-721F\u003cbr\u003e\n2K epoxy sealer - BK-400EP\u003cbr\u003e\n2K epoxy primer - BK-190EP\u003cbr\u003e\n1K floor sealer - BK-635PU\u003cbr\u003e\n1K resin-bound gravel sealer - BK-660PU\u003cbr\u003e\n2K PU furniture varnish - LS-253\u003cbr\u003e\n2K PU sealer - LS-735\u003cbr\u003e\n2K PU pool paint - LS-405\u003cbr\u003e\n2K PU floor paint - LS-740\u003cbr\u003e\n2K PU primer - LS-350\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan\u003e\u003cstrong\u003eOther painting tools:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\nPaint brush with metal ferrule - BE-75W\u003cbr\u003e\nPaint roller with metal ferrule - BE-76W\u003cbr\u003e\nPaint brush with plastic ferrule - BE-23W\u003cbr\u003e\nShort-pile paint roller - BE-79W\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan\u003e\u003cstrong\u003eDICHTON paints:\u003c\/strong\u003e\u003cbr\u003e\nSilk-effect emulsion paint - D.41W\u003cbr\u003e\nBathroom and kitchen paint - D.42W\u003cbr\u003e\nAnti-mould paint - D.49W\u003cbr\u003e\nLimewash - D.43W\u003cbr\u003e\nSilicate paint - D.45W\u003cbr\u003e\nInterior wall paint Matt - D.70W\u003cbr\u003e\nInterior wall paint Plus - D.73W\u003cbr\u003e\nInterior wall paint Premium - D.77W\u003cbr\u003e\nLiquid membrane - D.30W\u003cbr\u003e\nNano facade paint - D.67W\u003cbr\u003e\nFloor adhesive - D.80W\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n","brand":"BEKATEQ","offers":[{"title":"Telescopic pole","offer_id":50918152110414,"sku":"182792955","price":11.9,"currency_code":"EUR","in_stock":true},{"title":"Telescopic pole incl. 2x color rollers 25cm short pile","offer_id":50918152143182,"sku":"182792956","price":18.9,"currency_code":"EUR","in_stock":true},{"title":"Telescopic pole incl. foam roller set 5-piece","offer_id":50918152208718,"sku":"182792958","price":12.9,"currency_code":"EUR","in_stock":true},{"title":"Telescopic pole incl. painter's fleece 25m","offer_id":50918152175950,"sku":"182792957","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/152237zoom0webp-6304.webp?v=1767353764"},{"product_id":"d-35w-abdichtung-fugendichtmasse","title":"D.35W PU Sealant Joint Sealant","description":"\u003cdiv class=\"celwidget\" data-cel-widget=\"productDescription_feature_div\" data-csa-c-asin=\"\" data-csa-c-content-id=\"productDescription\" data-csa-c-id=\"1zxix4-f7t2ta-7v2maj-34zoam\" data-csa-c-is-in-initial-active-row=\"false\" data-csa-c-slot-id=\"productDescription_feature_div\" data-csa-c-type=\"widget\" data-feature-name=\"productDescription\" id=\"productDescription_feature_div\"\u003e\n\n\u003cdiv\u003e\n\n\u003cdiv class=\"a-row feature\" data-cel-widget=\"productDescription_feature_div\" data-feature-name=\"productDescription\" data-template-name=\"productDescription\" id=\"productDescription_feature_div\"\u003e\n\n\u003cdiv class=\"a-section a-spacing-small\" id=\"productDescription\"\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e1K PU Joint Sealant\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\n1K polyurethane joint sealant, solvent-free, aliphatic, UV-stable, highly flexible.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eUnique Benefits\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e- Excellent adhesion to almost all surfaces, with or without the use of special primers\u003cbr\u003e\n- Very good extrudability and easy application in various climatic conditions\u003cbr\u003e\n- Very good chemical resistance, suitable for sealing joints in swimming pools and chemically treated water\u003cbr\u003e\n- Very high joint movement accommodation (50%)\u003cbr\u003e\n- Can be applied underwater\u003cbr\u003e\n- Excellent heat resistance, suitable for application at high temperatures (above 60°C)\u003cbr\u003e\n- Good cold resistance: The sealant remains flexible even at temperatures below -40°C\u003c\/p\u003e\n\n\n\u003cp\u003e\u003cspan\u003eA novel elastic joint sealant that combines classic PU technology with PU silylation. The product combines first-class adhesion with excellent workability and bubble-free curing. It reacts with atmospheric moisture to produce a joint sealant with a joint movement accommodation factor of 50%. D.35W offers excellent adhesion to surfaces traditionally considered problematic for PU sealants, such as glass, aluminum, steel, polycarbonate, etc. The product has also been modified to improve extrudability. Its ease of application remains consistent regardless of varying temperature and humidity conditions. The product is easy to apply, and its shelf life differs significantly from conventional PU sealants.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e- Curing: 3-4mm per day\u003cbr\u003e\n- Application temperature: +5° to 35°C\u003cbr\u003e\n- Color: gray\u003cbr\u003e\n- Adhesion to concrete according to ASTM D4541: \u0026gt; 20 (\u0026gt;2) kg\/cm² (N\/mm²)\u003cbr\u003e\n- Tensile strength according to DIN EN 196-1: \u0026gt; 900 N\/mm² \u003cbr\u003e\n- Shelf life: 12 months in original sealed packaging at +5 to +25°\u003c\/p\u003e\n\n\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003cbr\u003e\nThoroughly clean the joint and ensure that no residues of oil, grease, wax, or silicone remain. In most cases, a primer is not necessary.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\nInstall the backing material. Both open-cell and closed-cell polyethylene round cords can be used as backing material. Installing the round cord is particularly important, as this ensures that the correct width-to-depth ratio is achieved. Insert the cartridge into the gun, cut off the end of the packaging, and screw on the nozzle. When injecting into the joint, ensure that no voids are formed. For wider joints, ensure that they are completely lined. It is recommended to wipe the joint immediately after extrusion. The ratio between width and depth should be 2:1 (with a minimum depth of 10mm). For example, a mixture of dishwashing liquid and water can be used as a suitable release agent.\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n","brand":"DICHTON","offers":[{"title":"1x 300g","offer_id":51392494960974,"sku":"182792855","price":13.9,"currency_code":"EUR","in_stock":true},{"title":"2x 300g","offer_id":51392494993742,"sku":"182792856","price":23.9,"currency_code":"EUR","in_stock":true},{"title":"3x 300g","offer_id":51392495026510,"sku":"182792857","price":37.9,"currency_code":"EUR","in_stock":true},{"title":"3x 300g + cartridge gun","offer_id":52315868463438,"sku":"182792863","price":47.9,"currency_code":"EUR","in_stock":true},{"title":"2x 300g + cartridge gun","offer_id":52315868430670,"sku":"182792862","price":29.9,"currency_code":"EUR","in_stock":true},{"title":"1x 300g + cartridge gun","offer_id":52315868397902,"sku":"182792861","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"3x 600g","offer_id":51392495124814,"sku":"182792860","price":47.9,"currency_code":"EUR","in_stock":true},{"title":"2x 600g","offer_id":51392495092046,"sku":"182792859","price":34.9,"currency_code":"EUR","in_stock":true},{"title":"1x 600g","offer_id":51392495059278,"sku":"182792858","price":16.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/unbenannt-1kopiec0ac2d70-4d7c-4582-aaf9-ba8097d9a91fjpg-6401.jpg?v=1767358198"},{"product_id":"bk-175ep-pflasterfugenmortel-2k-epoxidharz-mit-fugensand","title":"BK-175EP Epoxy Resin Paving Joint Mortar with Joint Sand","description":"\u003cdiv class=\"celwidget\" data-cel-widget=\"productDescription_feature_div\" data-csa-c-asin=\"\" data-csa-c-content-id=\"productDescription\" data-csa-c-id=\"5jt83x-e4peic-v5w90v-85qsap\" data-csa-c-is-in-initial-active-row=\"false\" data-csa-c-slot-id=\"productDescription_feature_div\" data-csa-c-type=\"widget\" data-feature-name=\"productDescription\" id=\"productDescription_feature_div\"\u003e\n\n\u003cdiv\u003e\n\n\u003cdiv class=\"a-row feature\" data-cel-widget=\"productDescription_feature_div\" data-feature-name=\"productDescription\" data-template-name=\"productDescription\" id=\"productDescription_feature_div\"\u003e\n\n\u003cdiv class=\"a-section a-spacing-small\" id=\"productDescription\"\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e2K Epoxy Resin Paving Joint Mortar - BEKATEQ BK-175EP\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nWater-based epoxy resin system for medium to large areas requiring jointing. Can also be applied conditionally in light rain.\u003cbr\u003e\n\u003cbr\u003e\n2 kg of BK-175EP epoxy resin binder is sufficient for approx. 25 kg of mineral filler, depending on the desired strength\/load-bearing capacity or mineral composition.\u003cbr\u003e\n\u003cbr\u003e\nWe recommend pre-treating the stone surface with the BE-450 Nano sealer. This prevents the color of the substrate from intensifying.\u003cbr\u003e\n\u003cbr\u003e\nThe sets are composed as follows:\u003cbr\u003e\n5 kg set = 0.5 kg binder + 5 kg sand\u003cbr\u003e\n10 kg set = 1 kg binder + 10 kg sand\u003cbr\u003e\n20 kg set = 2 kg binder + 20 kg sand\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eProperties\u003c\/strong\u003e\u003cbr\u003e\n- Fast and permanent jointing\u003cbr\u003e\n- Clean paved surfaces, NO weed growth\u003cbr\u003e\n- Slip-resistant, reduced risk of accidents, no cement haze\u003cbr\u003e\n- Adjustable from waterproof to vapor-permeable\u003cbr\u003e\n- Suitable for sweepers\u003cbr\u003e\n- Light to heavy traffic loads, depending on the mineral composition\u003cbr\u003e\n- Can be applied conditionally in light rain\u003cbr\u003e\n- Low odor\u003cbr\u003e\n- Chemical-resistant\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eOther Products\u003c\/strong\u003e\u003cbr\u003e\nBEKATEQ BE-450 Nano sealer and impregnating agent\u003cbr\u003e\nBEKATEQ BK-110EP 2K epoxy resin fine filler\u003cbr\u003e\nBEKATEQ BE-480 concrete additive\u003cbr\u003e\nDICHTON D.35W PU joint sealant\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003cbr\u003e\n- Mixing ratio: 1 part resin : 1 part hardener\u003cbr\u003e\n- Mixture viscosity: medium viscosity\u003cbr\u003e\n- Working time at 20°C (250 g): approx. 60 minutes\u003cbr\u003e\n- Walkable at 20°C: approx. 6 hours, depending on the temperature\u003cbr\u003e\n- Driveable at 20°C: approx. 7 days, depending on the temperature\u003cbr\u003e\n- Application temperature: 10°C - 25°C\u003cbr\u003e\n- Shelf life: up to 12 months, store in a cool, dry place\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n","brand":"BEKATEQ","offers":[{"title":"5kg \/ Increased water permeability","offer_id":52680333295950,"sku":"182792847","price":49.9,"currency_code":"EUR","in_stock":true},{"title":"20kg \/ Increased water permeability","offer_id":52680333361486,"sku":"182792849","price":104.9,"currency_code":"EUR","in_stock":true},{"title":"10kg \/ Increased water permeability","offer_id":52680333328718,"sku":"182792848","price":67.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/bk-129ko6piejpg-6493.jpg?v=1767354324"},{"product_id":"be-716-bootsreiniger-set-konzentrat-mit-scheuerburste","title":"BE-60W Smoothing Trowel 27x30cm made of sheet steel with wooden handle","description":"\u003cp\u003e\u003cstrong\u003eSmoothing trowel 27x30cm - BEKATEQ BE-60W\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTrowel made of stainless steel with a wooden handle. The smoothing trowel is suitable for filling, plastering and smoothing walls, ceilings or masonry.\u003c\/p\u003e\n\u003cp\u003eDimensions (LxW): 280x130mm\u003cbr\u003eFor filling, plastering and smoothing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther tools\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBE-76W Needle roller\u003cbr\u003eBE-79W Short-pile paint roller\u003cbr\u003eBE-75W Nail shoes\u003cbr\u003eBE-40W Paint roller set for wood\u003cbr\u003eBE-30W Paint roller set with paint tray\u003cbr\u003eBE-35W Paint roller set\u003cbr\u003eBE-18W Stirring paddle\u003cbr\u003eBE-60W Smoothing trowel\u003cbr\u003eBE-23W Painter's fleece\u003cbr\u003eBE-77W Telescopic pole\u003cbr\u003eBE-73W Cartridge press\u003cbr\u003eBE-74W Wallpaper brush\u003cbr\u003eBE-71W Mixing cup set\u003cbr\u003e\u003c\/p\u003e","brand":"BEKATEQ","offers":[{"title":"Default Title","offer_id":52932492034382,"sku":"182861590","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/152117zoom02xa14b7d68-88b6-4241-950d-474cb1d8f556jpg-354231.jpg?v=1769156898"},{"product_id":"be-23w-malervlies-abdeckvlies-25m","title":"BE-23W Painter's Fleece Drop Cloth 25m","description":"\u003cp\u003e\u003cstrong\u003ePainter's Drop Cloth\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"celwidget pd_rd_w-1gHd5 pd_rd_r-FKVQA26P0HZJH71WEM66 pd_rd_wg-yKftQ\" data-cel-widget=\"productDescription_feature_div\" data-csa-c-asin=\"\" data-csa-c-content-id=\"productDescription-3\" data-csa-c-id=\"t9lg4f-6sy04c-6lbyz0-naj8eg\" data-csa-c-is-in-initial-active-row=\"false\" data-csa-c-slot-id=\"productDescription_feature_div\" data-csa-c-type=\"widget\" data-feature-name=\"productDescription-3\" id=\"productDescription_feature_div\"\u003e\n\n\u003cdiv\u003e\n\n\u003cdiv class=\"a-row feature\" data-cel-widget=\"productDescription_feature_div\" data-feature-name=\"productDescription\" data-template-name=\"productDescription\" id=\"productDescription_feature_div\"\u003e\n\n\u003cdiv class=\"a-section a-spacing-small\" id=\"productDescription\"\u003e\n\n\u003cp\u003e\u003cspan\u003eHigh-quality cotton-blend non-woven fabric with special fibers for heavy-duty construction site use. Heavily needle-punched textiles for the highest standards and durability. Easy to unroll, highly walkable, and partially reusable. Exceptionally absorbent. Nearly waterproof backing. Protects the floor from dust and paint.\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e: Do not use on freshly glued flooring.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eProduct Data\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eHighly absorbent \/ moisture-resistant, reusable, non-slip painter's non-woven fabric with PE backing\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eFor covering and protecting surfaces, easy to lay out\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eSuitable for laminate, parquet, floorboards, concrete, carpet, cork, tiles, wood, OSB panels, marble, linoleum, or stone floors\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eHigh-quality\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePossible Applications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eProtection against damage - protect flooring, furniture, and other surfaces from scratches, moisture, dust, and dirt\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eNon-slip - increases safety and prevents slipping\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eBreathable - allows moisture to escape\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eReusable - use our painter's non-woven fabric multiple times\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eEasy to use - unroll and remove, also easy to cut\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eWeight: approx. 180 g\/m² (+\/- 10%) (including PE backing)\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eFibers: multicolored mixed fibers\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eBacking: laminated on one side with non-slip PE backing\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eBonding: thermal\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eWater absorption: approx. 580% (approx. 1.04 l\/m²)\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eMaterial thickness: approx. 1.20 mm – 1.30 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eMaximum tensile strength: (longitudinal) 41.3 N\/50 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eMaximum tensile strength: (transverse) 52.1 N\/50 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eElongation: (longitudinal) 8.1%\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eElongation: (transverse) 32.4%\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eRoll width: 1000 mm (+\/- 5 mm)\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan\u003eRoll length: 25 m (+\/- 15 mm)\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n","brand":"BEKATEQ","offers":[{"title":"Default Title","offer_id":52986974929230,"sku":"182861601","price":17.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/hauptbildko3piejpg-355301.jpg?v=1769156987"},{"product_id":"be-17w-ruhrquirl-lackdosen-quirl-kunststoff-40-cm","title":"BE-17W Stirring Paddle Paint Can Stirrer Plastic 40 cm","description":"\u003cdiv class=\"mb-3 long-description\"\u003e\n\n\u003cp\u003e\u003cstrong\u003ePaint Can Stirrer\u003c\/strong\u003e for thin and solvent-based materials, especially suitable for paints. Ideal for smaller paint containers\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\u003cp\u003e- Diameter: 6 cm\u003cbr\u003e- Length: 40 cm\u003cbr\u003e- Sturdy metal rod\u003cbr\u003e- Plastic stirrer\u003c\/p\u003e","brand":"BEKATEQ","offers":[{"title":"Default Title","offer_id":53062188499278,"sku":"BE17W0001","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/unbenannt-3jpg-334577.jpg?v=1770622952"},{"product_id":"d-63w-wandfarbe-ausbesserungsfarbe-weiss-100ml","title":"D.63W Wall Paint Touch-Up Paint White","description":"\u003cp\u003e\u003cstrong\u003eWhite matt wall paint 100ml - \u003c\/strong\u003efor quick touch-ups. Simply apply with the integrated dosing sponge for maximum coverage. Whether it's patched areas, filled cracks, stains, or signs of wear. With DICHTON Painter's White, minor imperfections are a thing of the past.\u003c\/p\u003e\n\n\u003cp\u003eHigh-quality emulsion interior wall paint in trade quality according to DIN EN 13300, for all wall and ceiling surfaces.\u003c\/p\u003e\n\n\u003cp\u003e+ Scrub-resistant\u003cbr\u003e\n+ Low-splatter\u003cbr\u003e\n+ High-build\u003cbr\u003e\n+ High-coverage\u003cbr\u003e\n+ Fast-drying\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMatching additional products\u003c\/strong\u003e\u003cbr\u003e\n- D.60W Fine filler set\u003cbr\u003e\n- D.50W Ready-mixed filler\u003cbr\u003e\n- BE-59W Brush set\u003cbr\u003e\n- BE-780 Mould remover\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\n- Contents: 100ml\u003cbr\u003e\n- Colour: white matt\u003cbr\u003e\n- Wet scrub resistance: 2\u003cbr\u003e\n- Drying time: approx. 2-3 hours\u003cbr\u003e\n- Coverage: Class 1 at 7m²\/l\u003cbr\u003e\n- Storage: store in a dry and frost-free place, min. 12 months\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDisposal:\u003c\/strong\u003e Only empty containers should be recycled. Material residues can be disposed of at a suitable landfill in compliance with local regulations.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"1x 100ml","offer_id":54721184989518,"sku":"6300001","price":2.9,"currency_code":"EUR","in_stock":true},{"title":"2x 100ml","offer_id":60150059991374,"sku":"6300002","price":6.9,"currency_code":"EUR","in_stock":true},{"title":"3x 100ml","offer_id":60150060024142,"sku":"6300003","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/D63W_1_Hauptbild_schnelltrocknend.jpg?v=1790369302"},{"product_id":"bk-305pu-balkonbeschichtung-abdichtung-in-grau","title":"BK-305PU Balcony Coating \u0026 Waterproofing Set in Grey","description":"\u003cp\u003e\u003cstrong\u003e1K PU balcony coating and waterproofing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe set consists of\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e1. PU coating:\u003c\/strong\u003e\u003cbr\u003e\nLatest generation fast-curing, solvent-based 1K liquid polyurethane for waterproofing seamless outdoor surfaces. Bubble-free, fast-curing, and all-year-round application thanks to the \"Humidity Activated Accellerator\" technology.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2. PU primer:\u003c\/strong\u003e\u003cbr\u003e\nVery fast-curing, low-viscosity, solvent-based, 1-component primer for outdoor use. The primer is a low-viscosity, fast-drying polyurethane-based primer suitable for many substrates. It is suitable for both non-porous and porous substrates.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3. Tools:\u003c\/strong\u003e\u003cbr\u003e\n2 x short-pile paint rollers 10cm and 25cm + stirring stick for mixing the paint\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct data 1K PU primer\u003c\/strong\u003e\u003cbr\u003e\n- Color: colorless\u003cbr\u003e\n- Coverage: min. 150g\/sqm per coat, depending on the substrate\u003cbr\u003e\n- Tack-free at 25°C: after 1-2 hrs.\u003cbr\u003e\n- Recoatable at 25°C: after 1-2 hrs.\u003cbr\u003e\n- Application temperature +5°C - +35°C\u003cbr\u003e\n- Storage: 12 months at temperatures of +5 - +25°C\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct data 1K PU coating\u003c\/strong\u003e\u003cbr\u003e\n- Consumption: min. 1.5kg\/sqm, 2.6kg\/sqm is recommended for commercial use\u003cbr\u003e\n- Application temperature: +5-+35°C\u003cbr\u003e\n- Dew point: the temperature must be at least \u0026gt;3°C above the dew point\u003cbr\u003e\n- Application: brush, squeegee, paint roller or by airless spraying\u003cbr\u003e\n- Drying time at 20-25°C: Tack-free after approx. 2-3 hrs. \/ Recoatable after approx. 6-12 hrs.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate preparation: \u003c\/strong\u003e\u003cbr\u003e\nSubstrates must be structurally sound and free from separating layers, cracks, loose parts, pinholes and burrs. Remove grease, wax, cement slurry and all other adhesion-reducing substances. Sand the substrate. Then prime the substrates.\u003c\/p\u003e\n\n\u003cp\u003eWear appropriate protective clothing during application, such as: safety glasses, disposable gloves, and respiratory masks if necessary. Apply the primer and coating using a squeegee or paint roller. Apply the material quickly and evenly. Highly absorbent substrates must be primed again. We recommend sanding the primer with BK-705 quartz sand if it is not to be further processed on the same day.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"5 sqm","offer_id":54757301190990,"sku":"BK305PU001","price":229.9,"currency_code":"EUR","in_stock":true},{"title":"20sqm","offer_id":54757301256526,"sku":"BK305PU003","price":749.9,"currency_code":"EUR","in_stock":true},{"title":"10 sqm","offer_id":54757301223758,"sku":"BK305PU002","price":399.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/bekateq2500x2500bekfinalkopieb987cf06-0d88-4f25-8015-4b859d14888djpg-6676.jpg?v=1769177028"},{"product_id":"d-90w-1k-pu-abdichtung-innen-und-aussen","title":"D.90W 1K PU sealant in blue for interior and exterior use","description":"\u003cp\u003e\u003c!-- x-tinymce\/html --\u003e\u003c\/p\u003e\n\n\u003cp\u003eUnique, \u003cstrong\u003ehighly elastic, one-component liquid plastic membrane\u003c\/strong\u003e, based on an aqueous polyurethane dispersion. The proven technology of polyurethane in combination with aqueous systems enables application indoors and outdoors, as well as in the swimming pool area. Fast-curing aliphatic, solvent-free, water-based 1K polyurethane liquid plastic on a dispersion basis. Tested as a surface protection system and as a composite waterproofing system under tiles indoors and outdoors, as well as in the swimming pool area.\u003c\/p\u003e\n\n\u003cp\u003eBy adding 15% water, the waterproofing can be applied as a primer on standard construction substrates such as wood, concrete, screed, plasterboard, etc.\u003c\/p\u003e\n\n\u003cp\u003eWaterproofing for concrete, screed, wood, metal, fiber cement, plasterboard, plaster, reinforced concrete, ceramic, tiles, tiles, aluminum, steel. For bitumen or asphalt, you require the BK-636PU 2K PU primer as a primer. Suitable for waterproofing balconies, terraces, showers, swimming pools (under tiles), and under tiles.\u003c\/p\u003e\n\n\u003cp\u003eNOT suitable for stone resin installations. The waterproofing can also not be used as a standalone coating.\u003c\/p\u003e\n\n\u003cp\u003e+ seamless, bubble-free and defect-free surfaces\u003cbr\u003e\n+ rapid through-curing\u003cbr\u003e\n+ easy application\u003cbr\u003e\n+ weather- and UV-resistant\u003cbr\u003e\n+ aliphatic \u0026amp; non-yellowing\u003cbr\u003e\n+ permanently load-bearing up to +90°C\u003cbr\u003e\n+ good chemical resistance\u003cbr\u003e\n+ vapor-permeable membrane\u003cbr\u003e\n+ suitable for airless application\u003cbr\u003e\n+ primer is prepared by adding 15% water\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003cbr\u003e\n- Color: blue\u003cbr\u003e\n- Consumption: min. 1.5 kg\/m², 2 kg\/m² recommended\u003cbr\u003e\n- Application temperature: +5 to +35°C\u003cbr\u003e\n- Dew point: the temperature must be at least \u0026gt;3°C above the dew point\u003cbr\u003e\n- Application: brush, squeegee, paint roller, or airless application\u003cbr\u003e\n- Shelf life: min. 12 months, store in a cool and frost-free place\u003cbr\u003e\n- Drying time at 25°C: tack-free after approx. 1-2 hours \/ recoatable after approx. 4-48 hours\u003c\/p\u003e\n\n\u003cp\u003eProtect from rain, dew, moisture, and frost during drying and application.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e: Substrates must be load-bearing and free from separating layers, cracks, loose parts, voids, and burrs. Remove grease, wax, cement slurry, and all other adhesion-reducing substances. Grind the substrate using diamond grinding discs, sandblasting, or shot blasting. The substrates are then primed. Standard construction substrates such as wood, concrete, screed, plasterboard, plaster, etc. can be primed with DICHTON D.90W diluted with 15% water. For asphalt or bitumen, the BK-636PU 2K PU primer must be applied.\u003cbr\u003e\nBond strength and compressive strength \u0026gt;1.5 N\/mm²\u003cbr\u003e\nMoisture in the substrate \u0026lt;5%\u003cbr\u003e\nRelative ambient humidity \u0026lt;80%\u003cbr\u003e\nDew point: the temperature must be at least \u0026gt;3°C above the dew point\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: During application, wear appropriate protective clothing, such as safety goggles, disposable gloves, and, if necessary, respiratory protection masks. For airless application, add 5-10% water beforehand and mix it in using a dissolver. Apply the material evenly. Depending on the levelness and roughness of the substrate, at least 1.5 kg\/m² is required; 2 kg\/m² is recommended. Apply the material evenly in 2 coats as described above to the already primed substrate. Each coat must be completely dry before applying the next coat.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSystem fleece\u003c\/strong\u003e: In connection areas, you can embed our system fleece bubble- and wrinkle-free. Apply approx. 2\/3 in the first coat. Embed the system fleece and recoat the system fleece wet-on-wet with the remaining quantity until it is glossy. Matte surfaces indicate a layer thickness that is too low. If you wish to recoat the D.90W, the layer must be sanded with sandpaper.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"2x 5kg","offer_id":60150071689550,"sku":"D90W00002","price":97.9,"currency_code":"EUR","in_stock":true},{"title":"5kg","offer_id":54994419810638,"sku":"D90W00001","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/farbeimerkopie38237bde-b4cc-4938-b592-1cdf36452075jpg-334581.jpg?v=1767358482"},{"product_id":"be-61w-venezianer-glattkelle","title":"BE-62W Smoothing Trowel with Wooden Handle, Venetian Plaster Trowel","description":"","brand":"BEKATEQ","offers":[{"title":"Default Title","offer_id":55037950329166,"sku":"BE62W0","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/152119zoom0jpg-334583.jpg?v=1767358490"},{"product_id":"d-80w-bodenkleber","title":"D.80W Floor Adhesive for Parquet, PVC, CV, Vinyl and Carpet","description":"\u003cp\u003e\u003cstrong\u003eFloor covering adhesive \u003c\/strong\u003eis suitable for parquet, PVC, CV, vinyl and carpet flooring, as well as wall coverings made of cork, linoleum, PVC, underlay wallpaper and thermal insulation materials. Also ideal for stair treads.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct properties\u003c\/strong\u003e\u003cbr\u003e\n- solvent-free (Giscode D1)\u003cbr\u003e\n- short drying time (approx. 15 min.)\u003cbr\u003e\n- high initial adhesion\u003cbr\u003e\n- suitable for underfloor heating\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\n- Coverage: 1 kg for approx. 4 m²\u003cbr\u003e\n- Application temperature: min. 15°C floor \u0026amp; 20°C air\u003cbr\u003e\n- Walkable: after approx. 2 hours\u003cbr\u003e\n- Load-bearing: after approx. 24 hours\u003cbr\u003e\n- Final strength: after approx. 2-5 days\u003cbr\u003e\n- Apply with notched trowel\/roller\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConsumption \u0026amp; Notching\u003c\/strong\u003e\u003cbr\u003e\n- smooth (A1): approx. 3.0 m²\/kg\u003cbr\u003e\n- lightly embossed (A2): approx. 2.7 m²\/kg\u003cbr\u003e\n- textile textured (B1): approx. 2.5 m²\/kg\u003cbr\u003e\n- coarsely textured (B2): approx. 2.0 m²\/kg\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e\u003cbr\u003e\nThe substrate must be dry, clean and load-bearing. Remove waxes, oils and varnishes. Prime highly absorbent substrates. Level out unevenness. Old coverings must be firmly bonded and cleaned.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\nAcclimatize material for 24 hours (min. 18°C). Cut the covering, fold back halfway, apply adhesive with notched trowel. After 10-15 min., lay down, rub in fully, repeat after 20 min. Observe the manufacturer's instructions.\u003c\/p\u003e\n\n\u003cp\u003eFor PVC\/CV coverings, drying time 30-35 min. Walkable after 2 hours, load-bearing and weldable after 24 hours.\u003c\/p\u003e\n\n\u003cp\u003eFor wall coverings, underlay wallpaper \u0026amp; thermal insulation materials, keep the substrate dry, load-bearing \u0026amp; clean. Apply with A1 notched trowel, bond after 10-15 min. Further processing after 24 hours.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eStorage \u0026amp; Disposal\u003c\/strong\u003e\u003cbr\u003e\nStore cool \u0026amp; frost-free; shelf life 12 months. Recycle empty containers, return liquid residues to collection points, dispose of dried residues with household waste.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"10 kg (up to 40 m²)","offer_id":55236720558414,"sku":"182793122","price":74.9,"currency_code":"EUR","in_stock":true},{"title":"5 kg (up to 20 m²)","offer_id":55236720525646,"sku":"182793121","price":42.9,"currency_code":"EUR","in_stock":true},{"title":"3 kg (up to 12 m²)","offer_id":55236720492878,"sku":"182793120","price":32.9,"currency_code":"EUR","in_stock":true},{"title":"5x10kg (up to 200sqm)","offer_id":55236720197966,"sku":"D80W-50","price":359.9,"currency_code":"EUR","in_stock":true},{"title":"4x10kg (up to 160sqm)","offer_id":55236720132430,"sku":"D80W-40","price":289.9,"currency_code":"EUR","in_stock":true},{"title":"3x10kg (up to 120sqm)","offer_id":55236720099662,"sku":"D80W-30","price":219.9,"currency_code":"EUR","in_stock":true},{"title":"2x10kg (up to 80sqm)","offer_id":55236719837518,"sku":"D80W-20","price":147.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/farbeimerkopie4f769e34-701f-4b04-b486-5a13495e70e9jpg-6088.jpg?v=1767605328"},{"product_id":"d-89w-1k-pu-abdichtung-faserverstarkt-fur-aussen","title":"D.89W 1K PU waterproofing liquid plastic fiber-reinforced for exterior use","description":"\u003cp\u003e\u003cstrong\u003e1K PU waterproofing in grey \u003c\/strong\u003e\u003cstrong\u003efiber-reinforced for exterior use - \u003c\/strong\u003efast-curing, solvent-based, fiber-reinforced, 1K liquid polyurethane of the latest generation with integrated glass fiber reinforcement. For fleece-free detail waterproofing in outdoor areas. The \"Humidity Activated Accellerator\" technology enables a bubble-free, cold-processable and cold-curing polyurethane membrane.\u003c\/p\u003e\n\n\u003cp\u003eThe D.89W liquid plastic waterproofing and coating system is weather-, UV- and hydrolysis-resistant, thus ensuring permanent protection of the building fabric. The reinforced technology of polyurethane in combination with the new catalyst system now enables us to incorporate the moisture-reactive catalyst. This cross-links very quickly with the moisture of the environment even in thick layer thicknesses to form a bubble-free membrane.\u003c\/p\u003e\n\n\u003cp\u003eWaterproofing for flat roofs and other surfaces on concrete, screed, reinforced concrete, steel, stainless steel, tiles, bitumen* and membrane repair (EPDM, PVC FPO \/ TPO) as well as waterproofing and detail waterproofing for balconies, terraces, in timber construction, for railing supports, etc.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCertified waterproofing system\u003c\/strong\u003e - \u003cstrong\u003eETAG 005 approval, W3\u003c\/strong\u003e.: Technical approvals for liquid-applied waterproofing. Meets the highest requirement level for service life.\u003c\/p\u003e\n\n\u003cp\u003e+ bubble- and defect-free surfaces\u003cbr\u003e\n+ rapid through-curing\u003cbr\u003e\n+ weather- and UV-resistant\u003cbr\u003e\n+ permanently load-resistant up to +90°C. 200°C shock temperature.\u003cbr\u003e\n+ excellent mechanical properties due to high stretchability, tensile and tear strength\u003cbr\u003e\n+ good chemical resistance\u003cbr\u003e\n+ vapor-permeable membrane\u003cbr\u003e\n+ for airless application, it can be thinned with LS-711 by 5-10%\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMatching additional products\u003c\/strong\u003e\u003cbr\u003e\n- BEKATEQ BK-637PU 1K PU primer for exterior use\u003cbr\u003e\n- BEKATEQ BK-636PU 2K PU primer for bitumen or asphalt\u003cbr\u003e\n- DICHTON D.88W 1K PU waterproofing for exterior use\u003cbr\u003e\n- BE-79W short-pile paint roller\u003cbr\u003e\n- BK-705 quartz sand for sprinkling\u003cbr\u003e\n- LS-711 thinner\u003cbr\u003e\n- BE-800 floor cleaner\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAreas of application\u003c\/strong\u003e\u003cbr\u003e\n- Flat roof waterproofing\u003cbr\u003e\n- Basement and foundation waterproofing\u003cbr\u003e\n- Insulation in roof, wall and basement areas\u003cbr\u003e\n- Floor coatings for indoor and outdoor areas\u003cbr\u003e\n- Waterproofing in sanitary areas (e.g. showers, etc.)\u003cbr\u003e\n- Pool, drinking water and container coatings\u003cbr\u003e\n- Crack injection\u003cbr\u003e\n- Highly elastic joint sealants\u003cbr\u003e\n- Stone resin flooring for indoor and outdoor areas\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDetail waterproofing \/ waterproofing of complex components\u003c\/strong\u003e\u003cbr\u003e\n- Wall and floor connections\u003cbr\u003e\n- Pipe penetrations\u003cbr\u003e\n- Skylights\u003cbr\u003e\n- Connections\u003cbr\u003e\n- Sleeves and corners\u003cbr\u003e\n- Flashing frames\u003cbr\u003e\n- Gutters\u003cbr\u003e\n- Piping\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\n- Consumption: min. 1.5kg\/sqm, for commercial use 2.6kg\/sqm is recommended\u003cbr\u003e\n- Application temperature +5 to +35°C\u003cbr\u003e\n- Dew point: the temperature must be at least \u0026amp;gt;3°C above the dew point\u003cbr\u003e\n- Application: brush, squeegee, paint roller or airless application\u003cbr\u003e\n- Drying time at 20-25°C: Tack-free after approx. 2-3 hrs \/ Recoatable after approx. 6-12 hrs.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e: Substrates must be load-bearing, free from separating layers, cracks, loose parts, voids and burrs. Remove grease, wax, cement slurry and all other adhesion-reducing substrates. Grind the substrate using diamond grinding discs, sand or shot blast. Load-bearing bituminous substrates as well as membranes (EPDM, PVC, FPO \/ TPO) must be thoroughly cleaned with a high-pressure water jet beforehand. Afterwards, the substrates are treated with the BK-637PU 1K PU primer or the BK-636PU 2K PU primer for bituminous substrates.\u003cbr\u003e\nAdhesion pull-off and compression strength \u0026gt;1.5N\/mm²\u003cbr\u003e\nMoisture in the substrate \u0026lt; 5%\u003cbr\u003e\nRelative ambient humidity \u0026lt; 80%\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: During application, wear appropriate protective clothing such as: safety goggles, disposable gloves, and if necessary, respiratory protection masks. For airless application, add 5-10% LS-711 thinner beforehand and mix it in using a dissolver. Apply the material evenly. Depending on the levelness and roughness of the substrate, at least 1.5kg\/sqm is required. Apply approx. 2\/3 of the quantity in the first coat. Apply the remainder wet-on-wet until it is glossy. \u003c\/p\u003e\n\n\u003cp\u003eIf you are working according to the European waterproofing standard, you need 2.6kg\/sqm. Optionally, you can embed our system fleece bubble- and wrinkle-free. Overcoat the system fleece wet-on-wet with the remaining quantity until it is glossy. Matte surfaces indicate too low a layer thickness. If you wish to recoat the D.89W, this layer must be sanded with sandpaper.\u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"2 x 1kg","offer_id":55311159591246,"sku":"D89W-2","price":49.9,"currency_code":"EUR","in_stock":true},{"title":"5kg","offer_id":55311159689550,"sku":"D89W-6","price":107.9,"currency_code":"EUR","in_stock":true},{"title":"1kg","offer_id":55311159394638,"sku":"D89W-1","price":34.9,"currency_code":"EUR","in_stock":true},{"title":"3 x 1kg","offer_id":55311159525710,"sku":"D89W-3","price":69.9,"currency_code":"EUR","in_stock":true},{"title":"4 x 1kg","offer_id":59489014579534,"sku":"D89W-5","price":87.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/bekateq2500x2500bekfinalkopie5a20d289-6cf1-4344-b1bf-283837f44636jpg-376643.jpg?v=1774873470"},{"product_id":"d-88w-1k-pu-abdichtung-fur-aussen","title":"D.88W 1K PU Liquid Waterproofing Membrane for Exterior Use","description":"\u003cp\u003e\u003c!-- x-tinymce\/html --\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e1K PU waterproofing in grey \u003c\/strong\u003e\u003cstrong\u003efor exterior use - \u003c\/strong\u003efast-curing, solvent-based, latest-generation 1K polyurethane liquid plastic. For fleece-free detail waterproofing outdoors. The \"Humidity Activated Accellerator\" technology enables a bubble-free, cold-processable, and cold-curing polyurethane membrane.\u003c\/p\u003e\n\n\u003cp\u003eThe D.88W liquid plastic waterproofing and coating system is weather-, UV-, and hydrolysis-resistant, thus ensuring permanent protection of the building fabric. The proven technology of polyurethane in combination with the new catalyst system now enables us to incorporate the moisture-reactive catalyst. This cross-links very quickly even in thick layer thicknesses with the moisture of the environment to form a bubble-free membrane.\u003c\/p\u003e\n\n\u003cp\u003eWaterproofing for flat roofs and other surfaces on concrete, screed, reinforced concrete, steel, stainless steel, tiles, bitumen* and membrane renovation (EPDM, PVC FPO \/ TPO) as well as waterproofing and detail waterproofing for balconies, terraces, in timber construction, for railing supports, etc.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCertified waterproofing system\u003c\/strong\u003e - \u003cstrong\u003eETAG 005 approval, W3\u003c\/strong\u003e.: Technical approvals for liquid-applied waterproofing. Meets the highest requirement level for service life.\u003c\/p\u003e\n\n\u003cp\u003e+ bubble- and defect-free surfaces\u003cbr\u003e\n+ rapid through-curing\u003cbr\u003e\n+ weather- and UV-resistant\u003cbr\u003e\n+ continuously load-bearing up to +90°C. 200°C shock temperature.\u003cbr\u003e\n+ excellent mechanical properties due to high stretchability, tensile and tear strength\u003cbr\u003e\n+ good chemical resistance\u003cbr\u003e\n+ vapor-permeable membrane\u003cbr\u003e\n+ for airless application, it can be diluted with LS-711 by 5-10%\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMatching auxiliary products\u003c\/strong\u003e\u003cbr\u003e\n- BEKATEQ BK-637PU 1K PU primer for exterior use\u003cbr\u003e\n- BEKATEQ BK-636PU 2K PU primer for bitumen or asphalt\u003cbr\u003e\n- DICHTON D.89W 1K PU waterproofing exterior fiber-reinforced\u003cbr\u003e\n- BE-79W short-pile paint roller\u003cbr\u003e\n- BK-705 quartz sand for sprinkling\u003cbr\u003e\n- LS-711 thinner\u003cbr\u003e\n- BE-800 floor cleaner\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAreas of application\u003c\/strong\u003e\u003cbr\u003e\n- Flat roof waterproofing\u003cbr\u003e\n- Basement and foundation waterproofing\u003cbr\u003e\n- Insulation in roof, wall, and basement areas\u003cbr\u003e\n- Floor coatings indoors and outdoors\u003cbr\u003e\n- Waterproofing in sanitary areas (e.g. showers, etc.)\u003cbr\u003e\n- Pool, drinking water, and container coatings\u003cbr\u003e\n- Crack injection\u003cbr\u003e\n- Highly elastic joint sealants\u003cbr\u003e\n- Stone resin flooring for indoor and outdoor areas\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDetail waterproofing \/ waterproofing of complex components\u003c\/strong\u003e\u003cbr\u003e\n- Wall and floor connections\u003cbr\u003e\n- Pipe penetrations\u003cbr\u003e\n- Skylights\u003cbr\u003e\n- Connections\u003cbr\u003e\n- Sleeves and corners\u003cbr\u003e\n- Flashing frames\u003cbr\u003e\n- Gutters\u003cbr\u003e\n- Piping\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\n- Consumption: min. 1.5kg\/sqm, for commercial use 2.6kg\/sqm is recommended\u003cbr\u003e\n- Application temperature +5 to +35°C\u003cbr\u003e\n- Dew point: the temperature must be min. \u0026gt;3°C above the dew point\u003cbr\u003e\n- Application: brush, squeegee, paint roller, or airless application\u003cbr\u003e\n- Drying time at 20-25°C: Tack-free after approx. 2-3 hrs \/ Recoatable after approx. 6-12 hrs.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e: Substrates must be load-bearing, free of separating layers, cracks, loose parts, voids, and burrs. Remove grease, wax, cement slurry, and all other adhesion-reducing substrates. Grind the substrate using diamond grinding discs, sand, or shot blast. Load-bearing bituminous substrates as well as membranes (EPDM, PVC, FPO \/ TPO) must be thoroughly cleaned with a high-pressure water jet beforehand. Then the substrates are treated with the BK-637PU 1K PU primer or the BK-636PU 2K PU primer for bituminous substrates.\u003cbr\u003e\nAdhesion pull-off and compression strength \u0026gt;1.5N\/mm²\u003cbr\u003e\nMoisture in the substrate \u0026lt; 5%\u003cbr\u003e\nRelative ambient humidity \u0026lt; 80%\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: Wear appropriate protective clothing during application, such as: safety goggles, disposable gloves, and if necessary, respiratory protection masks. For airless application, add 5-10% LS-711 thinner beforehand and mix it in using a dissolver. Apply the material evenly. Depending on the levelness and roughness of the substrate, min. 1.5kg\/sqm is required. Apply approx. 2\/3 of the quantity in the first coat. Apply the rest wet-on-wet until it is glossy. \u003c\/p\u003e\n\n\u003cp\u003eIf you are working according to the European waterproofing standard, you need 2.6kg\/sqm. Optionally, you can embed our system fleece bubble- and wrinkle-free. Recoat the system fleece wet-on-wet with the remaining quantity until it is glossy. Matte surfaces indicate too thin a layer thickness. If you want to recoat the D.89W, this layer must be sanded with sandpaper.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"2x 1kg","offer_id":59897359499598,"sku":"D88W00002","price":47.9,"currency_code":"EUR","in_stock":true},{"title":"1kg","offer_id":55316445102414,"sku":"D88W00001","price":32.9,"currency_code":"EUR","in_stock":true},{"title":"6 kg","offer_id":55316456931662,"sku":"D88W00006","price":117.9,"currency_code":"EUR","in_stock":true},{"title":"3x 1kg","offer_id":59897359532366,"sku":"D88W00003","price":67.9,"currency_code":"EUR","in_stock":true},{"title":"5x 1kg","offer_id":59897359565134,"sku":"D88W00005","price":107.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/bekateq2500x2500bekfinalkopie78892dda-0c58-45b6-9439-a950084f78e9jpg-356284.jpg?v=1770299973"},{"product_id":"be-18w-ruehrquirl-fuer-epoxidharz-farben-lacke","title":"BE-18W Stirring Rod for Epoxy Resin, Paints, Varnishes","description":"\u003cp\u003e\u003cstrong\u003eMixing paddle\u003c\/strong\u003e for mixing epoxy resin components, but also suitable for 1-component paints, varnishes, PU resins, and stains.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e: 80 x 400 x 8mm\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe mixing paddle is suitable for\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e- BE-702 2K epoxy resin floor coating\u003cbr\u003e\n- BK-190EP 2K epoxy resin primer\u003cbr\u003e\n- BK-400EP 2K epoxy resin sealer\u003cbr\u003e\n- BE-700 1K water-based floor paint\u003cbr\u003e\n- LS-470 chlorinated rubber-based floor paint\u003cbr\u003e\n- BK-205EP 2K epoxy resin self-leveling compound\u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"Default Title","offer_id":59234305442126,"sku":"182864572","price":11.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/unbenannt-4jpg-334381.jpg?v=1774253140"},{"product_id":"d-65w-raufaser-reparatur-spachtel-fertigspachtel","title":"D.65W Roughcast Repair Trowel Ready-Mixed Filler","description":"\u003cp\u003e\u003cstrong\u003ePremium\u003cbr\u003e\nFlock Wallpaper\u003cbr\u003e\nRepair Filler\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRepair, touch up \u003c\/strong\u003eand restore the \u003cstrong\u003eflock texture\u003c\/strong\u003e as well as prepare for subsequent coats. Thanks to the texture-giving wood chips in the filler, damage can be perfectly restored to match the flock appearance. Holes and cracks in flock-wallpapered walls can also be optimally repaired with the filler.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct data\u003c\/strong\u003e\u003cbr\u003e\n- INTERIOR USE\u003cbr\u003e\n- SOLVENT-FREE\u003cbr\u003e\n- PAINTABLE\u003cbr\u003e\n- ODORLESS\u003cbr\u003e\n- FAST-DRYING\u003cbr\u003e\n- DILUTABLE WITH WATER\u003cbr\u003e\n- TEXTURE-GIVING WOOD CHIPS\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\n- Contents: 400g\u003cbr\u003e\n- Color: white\u003cbr\u003e\n- Coverage: depending on the substrate\u003cbr\u003e\n- Application temperature: +10°C to +20°C (do not apply below +7°C)\u003cbr\u003e\n- Storage: store sealed, dry, cool, and frost-free, for at least 12 months\u003cbr\u003e\n- Coverage: depending on the condition of the substrate\u003cbr\u003e\n- Diluent: water\u003cbr\u003e\n- Tool: spatula\u003cbr\u003e\n- Cleaning of tools: immediately after use with water\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDrying time:\u003c\/strong\u003e (at 20°C, 65% relative humidity)\u003cbr\u003e\n- touch-dry: after approx. 1 - 2 hours\u003cbr\u003e\n- recoatable: depending on layer thickness, approx. 1 - 2 hours\u003cbr\u003e\n- fully dry: after approx. 24 hours, depending on layer thickness and the absorbency of the substrate.\u003c\/p\u003e\n\n\u003cp\u003eLower temperatures and higher humidity will extend the drying time\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIntended use\u003c\/strong\u003e\u003cbr\u003e\n- repair filler for all load-bearing flock wallpapers – medium texture\u003cbr\u003e\n- for touching up small and large damage on flock wallpapers\u003cbr\u003e\n- optimally restores the flock – feel\u003cbr\u003e\n- can be painted over after complete drying\u003cbr\u003e\n- for repairing holes and cracks\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCoating build-up and application technique\u003c\/strong\u003e\u003cbr\u003e\nThe substrate must be dry, free from dirt or loose parts for the filling work. All separating substances must be completely removed. Apply the product directly from the tube with a spatula and smooth or distribute it. If necessary, smooth the surface with a soft brush. After drying, the filler can be painted over. \u003cstrong\u003eKnead the tube before use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDisposal\u003c\/strong\u003e: Only empty containers should be given for recycling. Material residues can be disposed of at a suitable landfill in compliance with local regulations.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"3 x 400g","offer_id":59950549860686,"sku":"650004","price":16.9,"currency_code":"EUR","in_stock":true},{"title":"2 x 400g","offer_id":59950549762382,"sku":"650003","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"1 x 400g","offer_id":59950549631310,"sku":"650002","price":3.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/2png-396610.png?v=1782203458"},{"product_id":"d-62w-koernige-spachtelmasse-fuer-putz-mauerwerk","title":"D.62W Granular filler for plaster \u0026 masonry","description":"\u003cp\u003e\u003cstrong\u003eFine-grained filler\u003cbr\u003e\nfor plaster \u0026amp; masonry\u003cbr\u003e\nindoors \u0026amp; outdoors\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReady-to-use 1K acrylic filler. Crack and repair filler with a fine plaster texture for cracks in plaster and masonry.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003efine grain\u003c\/strong\u003e adapts optimally to smooth to fine-grained plaster surfaces, for example, fine plaster, fine float finish or painted plaster. For an inconspicuous and visually appealing overall appearance. The filler impresses with its high filling capacity and good UV and weather resistance. The low-odor ready-mixed filler is also easy to apply. Knead the tube thoroughly before use. For visible texture, do not smooth out, but dab with a sponge or brush.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eGood to know: which grain?\u003c\/strong\u003e\u003cbr\u003e\nWall plasters are available in many grains, from very fine to very coarse. D.62W has a \u003cstrong\u003erather fine grain\u003c\/strong\u003e. It is less suitable for coarse texture plasters such as roughcast or coarse-grained scratch plaster, because the repaired area looks finer than the surrounding surface.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct data\u003c\/strong\u003e\u003cbr\u003e\n- FINE GRAIN\u003cbr\u003e\n- FINE PLASTER-LIKE TEXTURE\u003cbr\u003e\n- INDOORS \u0026amp; OUTDOORS\u003cbr\u003e\n- SOLVENT-FREE\u003cbr\u003e\n- PAINTABLE \u0026amp; PLASTERABLE OVER\u003cbr\u003e\n- WEATHER- \u0026amp; UV-RESISTANT\u003cbr\u003e\n- FAST-DRYING\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAreas of application\u003c\/strong\u003e\u003cbr\u003e\n- Repair filler for filling in small unevenness or damage\u003cbr\u003e\n- for filling in smaller cracks and filling anchor holes\u003cbr\u003e\n- for filling and smoothing on fine plaster and fine-textured surfaces\u003cbr\u003e\n- usable on concrete, cement, plaster, Styrofoam, rigid foam\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\n- Contents: 330g\u003cbr\u003e\n- Color shade: white\u003cbr\u003e\n- Grain: fine\u003cbr\u003e\n- Consumption: depending on the substrate\u003cbr\u003e\n- Drying time: sandable after approx. 1-2 hrs.\/20°C\u003cbr\u003e\n- Completely dry: 24 hrs.\/20 °C\u003cbr\u003e\n- Application temperature: +10°C to +20°C (do not apply below +7°C)\u003cbr\u003e\n- Storage: store sealed, dry, cool but frost-free, min. 12 months\u003cbr\u003e\n- Tool cleaning: water\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\nThe substrate must be free of dirt or loose parts for the filling work. All separating substances must be completely removed. Painted surfaces must be cleaned and sanded. Metallic surfaces must be protected against corrosion. Apply the repair filler directly from the tube with a spatula and smooth it out. After drying, the filler can be sanded and painted over.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKNEAD THE TUBE BEFORE USE!\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e not suitable for damp substrates and surfaces that are constantly exposed to water, e.g. terraces, balconies etc.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDisposal\u003c\/strong\u003e: Only empty containers should be given for recycling. Material residues can be disposed of at a suitable landfill in compliance with local regulations.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"1 x 330g","offer_id":59950549664078,"sku":"620002","price":9.9,"currency_code":"EUR","in_stock":true},{"title":"2 x 330g","offer_id":59950549696846,"sku":"620003","price":14.9,"currency_code":"EUR","in_stock":true},{"title":"3 x 330g","offer_id":59950549729614,"sku":"620004","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/d62w01produktjpg-431747.jpg?v=1793109523"},{"product_id":"d-69w-holzreparatur-premium-fertigspachtel-innen-aussen","title":"D.69W Premium Ready-Mixed Wood Filler for Interior and Exterior Repairs","description":"\u003cp\u003e\u003cstrong\u003eWood Repair\u003cbr\u003e\nPremium Filler\u003cbr\u003e\nInterior \u0026amp; Exterior\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eMultipurpose, suitable for a wide range of applications. For quickly filling and \u003cstrong\u003erepairing cracks and holes\u003c\/strong\u003e. Excellent adhesion to wood.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Data\u003c\/strong\u003e\u003cbr\u003e\n- INTERIOR \u0026amp; EXTERIOR\u003cbr\u003e\n- SOLVENT-FREE\u003cbr\u003e\n- OVERPAINTABLE\u003cbr\u003e\n- ODORLESS\u003cbr\u003e\n- FAST-DRYING\u003cbr\u003e\n- THINNATABLE WITH WATER\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eScope of Application\u003c\/strong\u003e\u003cbr\u003e\nThe product is suitable for applying thin layers to repair and smooth new or previously painted wooden surfaces indoors and outdoors, such as doors, skirting boards, furniture, particleboard, joinery boards, and plywood.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003cbr\u003e\nFor filler work, the substrate must be free from dirt or loose particles. All separating substances must be completely removed. Painted surfaces must be cleaned and sanded (wear a dust mask). Knead the tube before use. Apply and smooth the product directly from the tube using a filler knife. After drying, the filler can be sanded and painted over.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003cbr\u003e\n- Contents: 400g\u003cbr\u003e\n- Color: white\u003cbr\u003e\n- Coverage: depending on the substrate\u003cbr\u003e\n- Drying time: sandable after approx. 1–2 hours at +20°C, fully dry after approx. 24 hours\u003cbr\u003e\n- Application temperature: +10°C to +20°C (do not apply below +7°C)\u003cbr\u003e\n- Storage: store sealed, dry, cool, and frost-free; shelf life: min. 12 months\u003cbr\u003e\n- Coverage: depending on the condition of the substrate\u003cbr\u003e\n- Thinning: supplied ready to use; if necessary, thin with water\u003cbr\u003e\n- Tools: filler knife\u003cbr\u003e\n- Cleaning tools: immediately after use with water\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDisposal\u003c\/strong\u003e: Only empty containers should be recycled. Material residues may be disposed of at a suitable landfill in accordance with local regulations.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"2 x 400g","offer_id":59991282876750,"sku":"690003","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"1 x 400g","offer_id":59991282319694,"sku":"690002","price":3.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/2png-397152.png?v=1782732768"},{"product_id":"bk-177ep-2k-epoxidharz-bindemittel-pflasterfugenmoertel","title":"BK-177EP 2K epoxy resin binder for paving joint mortar","description":"\u003cp\u003e\u003cstrong\u003eEpoxy resin paving jointing mortar \u003c\/strong\u003econsisting of components A + B, is mixed with kiln-dried quartz sand and is ideally suited for medium to large areas requiring jointing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct data\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eHigh-quality paved areas, NO weed growth through the joints, thus low maintenance effort afterwards\u003c\/li\u003e\n\n\t\u003cli\u003eFast and clean jointing, also water-emulsifiable and workable even in drizzle, as well as using the \"slurry method\"\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for sweepers, allowing for easy, mechanical and time-saving cleaning\u003c\/li\u003e\n\n\t\u003cli\u003eChemical-resistant to aggressive cleaning agents\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e0.5kg epoxy resin jointing mortar is sufficient for 5kg quartz sand\u003c\/li\u003e\n\n\t\u003cli\u003e1kg epoxy resin jointing mortar is sufficient for 10kg quartz sand\u003c\/li\u003e\n\n\t\u003cli\u003e2kg epoxy resin jointing mortar is sufficient for 20kg quartz sand\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eMixing ratio (by weight): 100 parts resin\/100 parts hardener\u003c\/li\u003e\n\n\t\u003cli\u003eViscosity: Medium viscosity\u003c\/li\u003e\n\n\t\u003cli\u003ePot life at 20°C: 60min (100g)\u003c\/li\u003e\n\n\t\u003cli\u003eWalkable at 20°C: 6h (temperature dependent)\u003c\/li\u003e\n\n\t\u003cli\u003eDriveable at 20°C: 7d (temperature dependent)\u003c\/li\u003e\n\n\t\u003cli\u003eApplication temperature: 10°C-25°C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e1. Preparation\u003cbr\u003e\nClean the joints to a depth of at least 30 mm (2\/3 of the stone height in traffic areas) as well as the area to be jointed free of residues (minimum joint width 5 mm). Adjacent areas that are not to be jointed are taped off.\u003cbr\u003e\n \u003cbr\u003e\n2. Pre-wetting\u003cbr\u003e\nPre-wet the area sufficiently. Avoid puddles or standing water. In principle, use clean and cold tap water when pre-wetting, mixing and cleaning.\u003cbr\u003e\n \u003cbr\u003e\n3. Mixing\u003cbr\u003e\nPlace the mineral filler in a suitable mixing bucket and slowly and completely add the separately mixed epoxy resin into the center of a depression. Start the stirring process with a mixing time of approx. 2-4 min. Depending on the desired consistency, in the final step, add at most the same amount of water (relative to the epoxy resin) and mix into a homogeneous mass, e.g., for 1.0 kg of epoxy resin, add max. 1.0 L of water.\u003cbr\u003e\n \u003cbr\u003e\n4. Application\u003cbr\u003e\nThen pour the paving jointing mortar onto the area in spots and carefully distribute it with a rubber float and work it intensively into the joints. Then sweep the area with a moistened coconut\/hair broom and free it from mortar residues. It is recommended to moisten\/clean the broom frequently with water. Then thoroughly spray the paved area with a fine water jet and sweep it again with a wet coconut\/hair broom. Moisture protection is not necessary in drizzle. In case of continuous or heavy rain, the freshly jointed area must be protected from rain for 7 - 9 h (depending on the temperature). The moisture protection must not be placed directly on the area so that air can circulate.\u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"2kg","offer_id":60643219669326,"sku":"1770003","price":59.9,"currency_code":"EUR","in_stock":true},{"title":"1kg","offer_id":60643210756430,"sku":"1770002","price":45.9,"currency_code":"EUR","in_stock":true},{"title":"0.5kg","offer_id":60640393757006,"sku":"1770001","price":35.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/bk-129-kopiejpg-400128.jpg?v=1788420503"},{"product_id":"d-81w-styroporkleber","title":"D.81W Styrofoam \u0026 Mounting Adhesive for Wall \u0026 Ceiling","description":"\u003cp\u003e\u003cstrong\u003eStyrofoam \u0026amp; Mounting Adhesive\u003c\/strong\u003e - Water-based dispersion adhesive for wall and ceiling panels, decorative elements, insulation panels, and the installation of Styrofoam finishing strips and under-wallpaper layers. The product is used to fix polystyrene cladding elements to concrete, stone, or wood.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Data\u003c\/strong\u003e\u003cbr\u003e\nFor walls and ceilings\u003cbr\u003e\nHigh initial adhesion and bonding strength\u003cbr\u003e\nStrong \u0026amp; flexible bonding strength\u003cbr\u003e\nEasy to apply\u003cbr\u003e\nVersatile use\u003cbr\u003e\nHigh coverage\u003cbr\u003e\nDamp-room resistant \u0026amp; frost-resistant\u003cbr\u003e\nReady to use\u003cbr\u003e\nSolvent-free, odorless \u0026amp; plasticizer-free\u003cbr\u003e\nPaintable \u0026amp; sandable\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOther Adhesives\u003c\/strong\u003e\u003cbr\u003e\nD.80W Floor Adhesive\u003cbr\u003e\nD.83W Glue Instead of Drilling (Cartridge)\u003cbr\u003e\nD.35W PU Joint Sealant (Cartridge)\u003cbr\u003e\nD.84W Mounting and Skirting Board Adhesive (Cartridge)\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003cbr\u003e\nType: Repair \u0026amp; Special Adhesive\u003cbr\u003e\nShade: Beige\u003cbr\u003e\nApplication Area: Interior\u003cbr\u003e\nColor: White\u003cbr\u003e\nConsumption: approx. 1.50 kg\/m²\/mm\u003cbr\u003e\nWorking Time: approx. 30 minutes\u003cbr\u003e\nCorrection Time: within approx. 10 minutes\u003cbr\u003e\nTotal Curing Time: 48 - 72 hours\u003cbr\u003e\nFire Behavior: E (WFT)\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDirections for Use\u003c\/strong\u003e\u003cbr\u003e\nThe STYROFOAM ADHESIVE should be applied in a thin layer of 2-4 mm using a notched trowel or a spatula. Once the adhesive has been applied to the panels or the substrate, move them slightly and press them against the substrate until the excess adhesive flows out. Remove excess adhesive immediately. Mix only as much material at a time as the working time allows, so that this time is not exceeded.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate Preparation\u003c\/strong\u003e\u003cbr\u003e\nThe substrate must not be cracked. It should be dry, clean, free from dust, grease, old paint, and small elements that could weaken the adhesion of the adhesive. All dusty substrates made of gypsum-containing materials should be sanded and dusted. Chipboard and OSB panels should be sanded, vacuumed, washed, and primed.\u003c\/p\u003e\n\n\u003cp\u003eThe work should be carried out at a substrate and ambient temperature of +5°C to +25°C. The work should not be carried out in rain, excessive sunlight, or strong wind. Technical data and application information apply to a temperature of 25°C ± 2°C and a relative humidity of 55-60%. Drying and curing times may vary under other weather conditions.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"1kg","offer_id":60660349501774,"sku":"810001","price":9.9,"currency_code":"EUR","in_stock":true},{"title":"4kg","offer_id":60660361789774,"sku":"810002","price":16.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/hauptbildjpg-400199.jpg?v=1788511460"},{"product_id":"be-485-polypropylenfasern-beton-estrich-moertel","title":"BE-485 Polypropylene Fibers for Concrete, Screed \u0026 Mortar","description":"\u003cp\u003e\u003cstrong\u003ePolypropylene Fibers \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Data\u003c\/strong\u003e\u003cbr\u003e\n- increases the strength of the concrete\u003cbr\u003e\n- prevents the formation of microcracks\u003cbr\u003e\n- ideal for floors with underfloor heating\u003cbr\u003e\n- reduces shrinkage cracks \u0026amp; shrinkage\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003cbr\u003e\n- Function: Reinforcement of concrete and mortar\u003cbr\u003e\n- Material: Polypropylene\u003cbr\u003e\n- Fiber class: Ia\u003cbr\u003e\n- Fiber length: 12mm\u003cbr\u003e\n- Fiber diameter: 34my\u003cbr\u003e\n- Fiber profile: round\u003cbr\u003e\n- Color: white\u003cbr\u003e\n- Dosage: 600-900g\/1m³ with a cement content of approx. 250-300kg\/1m³\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Reinforcement of concrete, cement mortars, cement screeds, self-leveling screeds, industrial floors, garage floors, and much more.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: approx. 600-900g of fibers per 1m³ of concrete or mortar with an approximate cement content of about 250–300kg. Before adding, the fibers should be moistened in a mixing bucket and thoroughly mixed. Then add to the concrete, screed, or mortar and mix thoroughly. The entire quantity of fibers should not be added to the mixture all at once in one place, as this can lead to clumping.\u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"1kg","offer_id":60663437492558,"sku":"4850001","price":15.9,"currency_code":"EUR","in_stock":true},{"title":"5kg","offer_id":60663458070862,"sku":"4850002","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/transparenter-zip-beutel-mit-wei-en-mikrofaser-schnipseln-kopiejpg-400232.jpg?v=1788523485"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/collections\/risse-in-der-wand-werden-mit-einer-fertigspachtel-repariert-und-ausgespachtelt.png?v=1778778559","url":"https:\/\/www.bekateq.de\/en\/collections\/spachtel-putz.oembed","provider":"BEKATEQ","version":"1.0","type":"link"}