{"title":"Sealing compound","description":"","products":[{"product_id":"bk-150ep-epoxidharzmoertel-reparaturmoertel","title":"BK-150EP Epoxy Resin Mortar Repair Mortar","description":"\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eEpoxy resin mortar\u003c\/strong\u003e as a repair mortar on an epoxy resin basis, ideally suited for spalls, holes, and defects in concrete and screed. Thanks to the high mechanical load capacity of up to 3 t\/sqm, the epoxy resin mortar is resistant to pallet trucks and forklifts.\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003eThe special properties of the epoxy resin make the mortar resistant to oils, greases, de-icing salts, acids, and alkalis. The epoxy resin mortar is also suitable as a leveling layer on uneven surfaces. The mixed epoxy resin mortar can be poured into defects and flows practically by itself.\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003eIn addition to industrial halls, for example, for repairing unevenness, larger holes, and damage, or for leveling, the epoxy mortar also finds its place in the private sector, for example, for repairing cracks in garage screed floors, stairs, or basement floors. It is also suitable for repairing curbs or grouting paving stones. This reliably prevents weed growth.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eScope of delivery: You will receive the epoxy resin, quartz sand, and hardener delivered separately. The resin and hardener are in a separate bottle\/container. First, the epoxy resin is mixed with the quartz sand for several minutes using a mixer paddle and cordless drill until a homogeneous mixture has formed. Then the hardener is added and stirred again for several minutes until you also have a homogeneous mixture. The individual components are matched to each other. If you want to mix small quantities, you must measure them out by weight.\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003eIdeally suited as floor preparation for subsequent floor coatings with the BK-190EP primer and then the BE-702 epoxy resin coating!\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eRecommended additional products\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- BK-190EP 2K epoxy resin primer - adhesion promoter and absorption compensation\u003cbr\u003e\n- BE-702 2K epoxy resin floor coating - 2K colored floor paint\u003cbr\u003e\n- BK-400EP 2K epoxy resin sealer - 2K colorless floor sealer\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eSuitable for floor surfaces in:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- Chemical plants\u003cbr\u003e\n- Car wash halls\u003cbr\u003e\n- Bathrooms\u003cbr\u003e\n- Commercial kitchens\u003cbr\u003e\n- Workshops\u003cbr\u003e\n- Garages, etc.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFor vertical surfaces, we recommend our \u003cstrong\u003eBK-110EP fine filler.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eProperties of BK-150EP 2K epoxy resin mortar\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- Frost-resistant and waterproof\u003cbr\u003e\n- Highly resistant to mechanical loads\u003cbr\u003e\n- No flaking or cracking\u003cbr\u003e\n- Easy to apply\u003cbr\u003e\n- Robust, strong, chemical-resistant, plasticizer-resistant\u003cbr\u003e\n- Load capacity up to 3 t\/sqm\u003cbr\u003e\n- High stability\u003cbr\u003e\n- Thin and thick layer thicknesses possible\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- Color: sand color\u003cbr\u003e\n- Drying: walkable after approx. 1 day at 20°C\u003cbr\u003e\n- Mechanical load capacity: after approx. 7 days at 20°C\u003cbr\u003e\n- Consumption: depending on the application and the size of the repair area\u003cbr\u003e\n- Application temperature: min. 6-10°C - max. 30°C\u003cbr\u003e\n- Pot life: approx. 30 min.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003eSurfaces must be free of dust, oil, and grease and \/ or contain no other adhesion-reducing or loose particles. Add the hardener to the mortar mixture and mix for approx. 2-3 minutes with a mixer paddle, then trowel on with a smoothing trowel.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eCement mortar and epoxy resin mortar compared\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003eCement mortar is probably the best-known mortar and is therefore also widely used. However, epoxy resin mortar has numerous advantages. The 2-component epoxy resin mortar is waterproof and frost-resistant. In addition, the EP mortar is highly resistant to mechanical loads, with up to 3 t\/sqm. Cement mortar would flake off or crumble again in no time under such mechanical loads. Repair areas (e.g., driven-over surfaces) or unevenness can be repaired without any problems. Furthermore, the fully cured epoxy resin mortar is resistant to chemical exposure, de-icing salt solutions, oils, greases, fuels, and a variety of mineral and diluted acids. Epoxy resin mortar is also easy to apply. Synthetic resin mortar is clearly the better choice.\u003c\/span\u003e\u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"1kg","offer_id":47655178076494,"sku":"182864613","price":23.9,"currency_code":"EUR","in_stock":true},{"title":"5kg","offer_id":47605611004238,"sku":"182864614","price":49.9,"currency_code":"EUR","in_stock":true},{"title":"10kg","offer_id":47655178010958,"sku":"182864615","price":79.9,"currency_code":"EUR","in_stock":true},{"title":"2x 10kg","offer_id":47655178043726,"sku":"182864616","price":154.9,"currency_code":"EUR","in_stock":true},{"title":"3x 10kg","offer_id":54547010781518,"sku":"15000030","price":229.9,"currency_code":"EUR","in_stock":true},{"title":"4x 10kg","offer_id":54547010847054,"sku":"15000040","price":304.9,"currency_code":"EUR","in_stock":true},{"title":"5x 10kg","offer_id":54547010912590,"sku":"15000050","price":387.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/BK-150EP_Produktbild.jpg?v=1786609006"},{"product_id":"bk-110ep-feinspachtel-2k-epoxidharz-spachtelmasse-raparaturspachtel","title":"BK-110EP Fine Putty 2K Epoxy Resin Putty, Repair Putty","description":"\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eThe \u003cstrong\u003efine filler \u003c\/strong\u003eon an \u003cstrong\u003eepoxy resin \u003c\/strong\u003ebase is suitable for filling smaller imperfections and applying thin coats of fine filler to pre-treated surfaces. Thanks to its special properties, the epoxy resin-based fine filler is universally applicable, e.g. \u003cstrong\u003ethroughout the automotive sector, for all bodywork,\u003c\/strong\u003e in model making, for repairing cracks or holes in screed or concrete, and much more.\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003eIt is particularly popular\u003cstrong\u003e in boat building.\u003c\/strong\u003e The micro-fine fillers in the compound result in a very smooth surface. Thanks to its easy application and short curing time, further work can be carried out quickly. Several coats can also be applied one after the other.\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eThe filler compound provides good adhesion to: steel, iron, aluminum, metal, fiberglass, concrete, tiles, screed, wood.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIMPORTANT for the automotive sector: can be sanded down to 0, therefore no edges or transitions in the finished result.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eAreas of application\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- Boat repair\u003cbr\u003e\n- Car repair\u003cbr\u003e\n- All bodywork\u003cbr\u003e\n- Motorcycle repair\u003cbr\u003e\n- Wood repairs\u003cbr\u003e\n- Fiberglass conversions exposed to heavy vibrations\u003cbr\u003e\n- Floor repairs (concrete, screed)\u003cbr\u003e\n- Removal of osmosis damage on fiberglass boats\u003cbr\u003e\n- Model making\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eProduct properties BK-110EP fine filler on an epoxy resin base\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- Fast-curing and water-resistant\u003cbr\u003e\n- Can be sanded down to 0, therefore no edges or transitions\u003cbr\u003e\n- Filling and repairing screed\u003cbr\u003e\n- Floor repairs for cracks or holes\u003cbr\u003e\n- Pinhole-free and easily sandable surface\u003cbr\u003e\n- Smoothing of scratches and imperfections\u003cbr\u003e\n- Finishing of pre-filled damaged areas\u003cbr\u003e\n- Easy application\u003cbr\u003e\n- Cures without cracking\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- Mixing ratio: 3 parts gray filler + 1 part red hardener\u003cbr\u003e\n- Working time at 20°C approx. 30 min.\u003cbr\u003e\n- Can be reworked and sanded after approx. 24 hours at 20°C\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\nMeasure out the filler (Component A) and hardener (Component B) in the correct mixing ratio and mix thoroughly. As a rule, the repair area can be sanded after the next day (depending on the temperatures). Further filling work or subsequent coats can then be carried out. Always sand the filler coat before the next working step.\u003cbr\u003e\n\u003cbr\u003e\nThe base and hardener must be mixed evenly together. Only mix the amount that can be used immediately. Do not apply layers that are too thick at once. Two, three, or more coats are better than one layer that is too thick. Applying thick layers extends the drying times!\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eThe consistency of the fine filler is highly dependent on the temperatures.\u003c\/strong\u003e\u003cbr\u003e\nAt low temperatures, the filler and\/or hardener may become viscous. In such a case, bring both components to room temperature before application, either by placing them in a warm bath or on a heater. This ensures trouble-free application. \u003c\/span\u003e\u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"0.75kg","offer_id":48890827833678,"sku":"182793408","price":24.9,"currency_code":"EUR","in_stock":true},{"title":"1.5kg","offer_id":47652263297358,"sku":"182793409","price":37.9,"currency_code":"EUR","in_stock":true},{"title":"3kg","offer_id":48890827964750,"sku":"182793410","price":57.9,"currency_code":"EUR","in_stock":true},{"title":"4.5kg","offer_id":48890828030286,"sku":"182793411","price":77.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/BK-110EP_Produktbild.jpg?v=1786609005"},{"product_id":"d-30w-flussigfolie-mit-farbrolle-set","title":"D.30W Liquid Membrane Waterproofing for Floors \u0026 Walls","description":"\u003cp\u003e\u003c!-- x-tinymce\/html --\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eLiquid membrane\u003c\/strong\u003e, a single-component, solvent-free, and waterproof waterproofing membrane for subsequent ceramic floor coverings such as tiles. Ideal for wet areas. Can be applied to floors and wall surfaces indoors. The liquid membrane forms a tight and elastic floor \u0026amp; wall coating. Fine cracks and joints are bridged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct data\u003c\/strong\u003e\u003cbr\u003e\n- Solvent-free\u003cbr\u003e\n- Highly elastic\u003cbr\u003e\n- High adhesion strength\u003cbr\u003e\n- Silicone compatible\u003cbr\u003e\n- For full-surface waterproofing\u003cbr\u003e\n- Ideal for wet areas\u003cbr\u003e\n- Suitable for underfloor heating\u003cbr\u003e\n- Water-impermeable\u003cbr\u003e\n- For walls and floors\u003cbr\u003e\n- Very good crack bridging\u003cbr\u003e\n- Perfect application thickness\u003cbr\u003e\n- Viscous sealing compound\u003cbr\u003e\n- Easy application (paint roller included)\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInteresting additional products\u003c\/strong\u003e\u003cbr\u003e\n- BEKATEQ BE-518 deep primer for absorbent substrates\u003cbr\u003e\n- BEKATEQ BK-180 whitish adhesion primer for smooth substrates\u003cbr\u003e\n- BEKATEQ BK-155 quartz primer ideal for smooth substrates\u003cbr\u003e\n- BEKATEQ BK-165 concrete primer ideal for smooth substrates\u003cbr\u003e\n- BEKATEQ BK-110EP 2K epoxy fine filler for walls and especially floor surfaces\u003cbr\u003e\n- DICHTON D.50W 1-component ready-mixed filler for wall surfaces\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003cbr\u003e\n- Color: Gray\u003cbr\u003e\n- Density: approx. 1.50kg\/dm3\u003cbr\u003e\n- Application: Rolling, brushing, troweling\u003cbr\u003e\n- Number of coats: at least 2 (3 recommended)\u003cbr\u003e\n- Material consumption: 0.4kg to 0.7kg\/sqm per coat depending on the substrate\u003cbr\u003e\n- Drying time\/recoat time: after approx. 4 hrs at 20°C\u003cbr\u003e\n- Drying of the final coat: approx. 24 hrs\u003cbr\u003e\n- Application temperature: approx. +5°C to +30°C\u003cbr\u003e\n- Cleaning of tools: with water\u003cbr\u003e\n- Storage: approx. +5°C to +30°C\u003c\/p\u003e\n\n\u003cp\u003eThe drying times refer to 23°C and 50% relative humidity. Higher temperatures and lower humidity shorten the drying time, lower temperatures and higher humidity extend it.\u003c\/p\u003e\n\n\u003cp\u003eSuitable for non-absorbent but also for absorbent substrates indoors. The product can be used on concrete, aerated concrete, gypsum and cement plaster, gypsum and gypsum fiberboard, as well as fully dried screed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: Apply DICHTON liquid membrane in two coats evenly to the prepared substrate. First seal expansion joints, corners, pipe penetrations, and floor drains with special sealing tape, corners, or sleeves, and embed them in the mortar. Apply the liquid membrane to the entire surface with a paint roller, painter's brush, brush, or steel trowel and rub it intensively into the substrate. The thickness of the individual wet coats should not exceed max. 1 mm. Apply the next coat after the previous one has dried. The layer thickness of the finished coating should be at least 1 mm. Protect the freshly applied waterproofing layer from drying out too quickly and damage during further processing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e: The substrate must be firm, dry, level, clean, crack-free, load-bearing, and free of all substances that could impair adhesion (such as dust, oil, loose paint residues, etc.). Substrates with underfloor heating must be sufficiently heated beforehand (gypsum substrate below 0.5 % CM, cement substrate below 2 % CM). Trowel out larger unevenness with a suitable product. Treat substrates with the corresponding BEKATEQ primer. Absorbent substrates: BEKATEQ BE-518 deep primer - non-absorbent\/smooth substrates: BEKATEQ BK-180 adhesion primer or BEKATEQ BK-165 concrete primer. Allow the primer to dry completely. Do not use in areas exposed to constant contact with water and rising moisture from the substrate.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"7 kg","offer_id":49267969556814,"sku":"182793129","price":44.9,"currency_code":"EUR","in_stock":true},{"title":"12 kg","offer_id":49267952681294,"sku":"182793130","price":67.9,"currency_code":"EUR","in_stock":true},{"title":"5.5kg","offer_id":49267939606862,"sku":"182793128","price":42.9,"currency_code":"EUR","in_stock":true},{"title":"4kg","offer_id":49267918111054,"sku":"182793127","price":29.9,"currency_code":"EUR","in_stock":true},{"title":"1.5kg","offer_id":49267854377294,"sku":"182793126","price":18.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/farbeimerkopie12a36506-c1d5-4c56-a0ba-24099e4b8b65jpg-6084.jpg?v=1767353380"},{"product_id":"d-50w-fertigspachtel-weiss-mit-spachtel","title":"D.50W 2-in-1 Ready-Mixed Filler for Super-Smooth Surfaces","description":"\u003cp\u003e\u003cstrong\u003e2-in-1 finishing filler\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eOne-component finishing filler in a beautiful white. Creates super-smooth surfaces on interior walls and ceilings. Dries quickly. The fine filler is also suitable for rooms with increased humidity. The filler can be applied by hand or machine.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct data\u003c\/strong\u003e\u003cbr\u003e\n- Wet application possible\u003cbr\u003e\n- Suitable for rooms with increased humidity\u003cbr\u003e\n- Highly flexible\u003cbr\u003e\n- Water-resistant\u003cbr\u003e\n- Easy to sand\u003cbr\u003e\n- High adhesion\u003cbr\u003e\n- Fast-drying\u003cbr\u003e\n- Solvent-free\u003cbr\u003e\n- Crack-resistant\u003cbr\u003e\n- Easy to apply\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\n- Color shade: white\u003cbr\u003e\n- Quality levels: Q1 to Q4\u003cbr\u003e\n- Application: filler\u003cbr\u003e\n- Material consumption: approx. 1 kg\/m² per 1 mm layer thickness, depending on the type of substrate\u003cbr\u003e\n- Drying time: approx. 6 hours (1 mm layer thickness)\u003cbr\u003e\n- Application temperature: from +5°C to +25°C\u003cbr\u003e\n- Shelf life: approx. 12 months\u003cbr\u003e\n- Tool cleaning: with water\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInteresting additional products\u003c\/strong\u003e\u003cbr\u003e\n- BEKATEQ BE-518 deep primer for absorbent substrates\u003cbr\u003e\n- BEKATEQ BK-180 whitish bonding primer for smooth substrates\u003cbr\u003e\n- BEKATEQ BK-155 quartz primer ideal for smooth substrates but also for subsequent filler work\u003cbr\u003e\n- BEKATEQ BK-165 concrete bonding primer ideal for smooth substrates but also for subsequent filler work\u003cbr\u003e\n- BEKATEQ BK-110EP 2K epoxy fine filler for walls and especially floor surfaces\u003cbr\u003e\n- DICHTON D.30W liquid membrane for wall \u0026amp; floor surfaces\u003c\/p\u003e\n\n\u003cp\u003eSuitable for non-absorbent but also for absorbent substrates indoors. The product can be used on concrete, screed, aerated concrete, plaster, and cement plaster, gypsum and gypsum fiberboard, wood, paper, lacquered\/painted surfaces.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: The filler is sprayed or applied evenly with a smoothing trowel. A maximum layer thickness of 2 mm can be applied in one operation. The finishing filler can also be sprayed with suitable airless equipment (if necessary, the finishing filler can be diluted with a maximum of 5% water). After the previous coat has dried, apply another coat if necessary. Sand the fully dried surface with a sanding screen or sandpaper. Wear safety goggles and a dust mask during sanding. Dust off the sanded surfaces and prime. In wet application (dust-free application), after the initial setting of the filler layer, after about 3 hours, finish with a sponge trowel. If necessary, lightly spray with clean water immediately before working.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e: The substrate should be sufficiently load-bearing and cleaned accordingly, i.e., all layers that can reduce adhesion must be removed. Absorbent substrates made of lime-cement plaster, gypsum plaster, and gypsum fiberboard should\u003cbr\u003e\nbe primed with a suitable BEKATEQ primer (BE-518, BK-155, BK-165, etc.).\u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"15 kg","offer_id":49268045709646,"sku":"182793125","price":52.9,"currency_code":"EUR","in_stock":true},{"title":"10kg","offer_id":49268028637518,"sku":"182793124","price":37.9,"currency_code":"EUR","in_stock":true},{"title":"5kg","offer_id":49268003537230,"sku":"182793123","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/farbeimerkopiee945fa14-5abe-4ac4-9f19-0c356a6d55a7jpg-6086.jpg?v=1767353401"},{"product_id":"d-35w-abdichtung-fugendichtmasse","title":"D.35W PU Sealant Joint Sealant","description":"\u003cdiv class=\"celwidget\" data-cel-widget=\"productDescription_feature_div\" data-csa-c-asin=\"\" data-csa-c-content-id=\"productDescription\" data-csa-c-id=\"1zxix4-f7t2ta-7v2maj-34zoam\" data-csa-c-is-in-initial-active-row=\"false\" data-csa-c-slot-id=\"productDescription_feature_div\" data-csa-c-type=\"widget\" data-feature-name=\"productDescription\" id=\"productDescription_feature_div\"\u003e\n\n\u003cdiv\u003e\n\n\u003cdiv class=\"a-row feature\" data-cel-widget=\"productDescription_feature_div\" data-feature-name=\"productDescription\" data-template-name=\"productDescription\" id=\"productDescription_feature_div\"\u003e\n\n\u003cdiv class=\"a-section a-spacing-small\" id=\"productDescription\"\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e1K PU Joint Sealant\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\n1K polyurethane joint sealant, solvent-free, aliphatic, UV-stable, highly flexible.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eUnique Benefits\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e- Excellent adhesion to almost all surfaces, with or without the use of special primers\u003cbr\u003e\n- Very good extrudability and easy application in various climatic conditions\u003cbr\u003e\n- Very good chemical resistance, suitable for sealing joints in swimming pools and chemically treated water\u003cbr\u003e\n- Very high joint movement accommodation (50%)\u003cbr\u003e\n- Can be applied underwater\u003cbr\u003e\n- Excellent heat resistance, suitable for application at high temperatures (above 60°C)\u003cbr\u003e\n- Good cold resistance: The sealant remains flexible even at temperatures below -40°C\u003c\/p\u003e\n\n\n\u003cp\u003e\u003cspan\u003eA novel elastic joint sealant that combines classic PU technology with PU silylation. The product combines first-class adhesion with excellent workability and bubble-free curing. It reacts with atmospheric moisture to produce a joint sealant with a joint movement accommodation factor of 50%. D.35W offers excellent adhesion to surfaces traditionally considered problematic for PU sealants, such as glass, aluminum, steel, polycarbonate, etc. The product has also been modified to improve extrudability. Its ease of application remains consistent regardless of varying temperature and humidity conditions. The product is easy to apply, and its shelf life differs significantly from conventional PU sealants.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e- Curing: 3-4mm per day\u003cbr\u003e\n- Application temperature: +5° to 35°C\u003cbr\u003e\n- Color: gray\u003cbr\u003e\n- Adhesion to concrete according to ASTM D4541: \u0026gt; 20 (\u0026gt;2) kg\/cm² (N\/mm²)\u003cbr\u003e\n- Tensile strength according to DIN EN 196-1: \u0026gt; 900 N\/mm² \u003cbr\u003e\n- Shelf life: 12 months in original sealed packaging at +5 to +25°\u003c\/p\u003e\n\n\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003cbr\u003e\nThoroughly clean the joint and ensure that no residues of oil, grease, wax, or silicone remain. In most cases, a primer is not necessary.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\nInstall the backing material. Both open-cell and closed-cell polyethylene round cords can be used as backing material. Installing the round cord is particularly important, as this ensures that the correct width-to-depth ratio is achieved. Insert the cartridge into the gun, cut off the end of the packaging, and screw on the nozzle. When injecting into the joint, ensure that no voids are formed. For wider joints, ensure that they are completely lined. It is recommended to wipe the joint immediately after extrusion. The ratio between width and depth should be 2:1 (with a minimum depth of 10mm). For example, a mixture of dishwashing liquid and water can be used as a suitable release agent.\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n","brand":"DICHTON","offers":[{"title":"1x 300g","offer_id":51392494960974,"sku":"182792855","price":13.9,"currency_code":"EUR","in_stock":true},{"title":"2x 300g","offer_id":51392494993742,"sku":"182792856","price":23.9,"currency_code":"EUR","in_stock":true},{"title":"3x 300g","offer_id":51392495026510,"sku":"182792857","price":37.9,"currency_code":"EUR","in_stock":true},{"title":"3x 300g + cartridge gun","offer_id":52315868463438,"sku":"182792863","price":47.9,"currency_code":"EUR","in_stock":true},{"title":"2x 300g + cartridge gun","offer_id":52315868430670,"sku":"182792862","price":29.9,"currency_code":"EUR","in_stock":true},{"title":"1x 300g + cartridge gun","offer_id":52315868397902,"sku":"182792861","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"3x 600g","offer_id":51392495124814,"sku":"182792860","price":47.9,"currency_code":"EUR","in_stock":true},{"title":"2x 600g","offer_id":51392495092046,"sku":"182792859","price":34.9,"currency_code":"EUR","in_stock":true},{"title":"1x 600g","offer_id":51392495059278,"sku":"182792858","price":16.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/unbenannt-1kopiec0ac2d70-4d7c-4582-aaf9-ba8097d9a91fjpg-6401.jpg?v=1767358198"},{"product_id":"bk-636pu-2k-pu-grundierung-fur-innen-und-aussen","title":"BK-636PU 2K PU Primer for Interior and Exterior Use","description":"\u003cp\u003e\u003cstrong\u003e2K PU primer for indoor and outdoor use - \u003c\/strong\u003euniversally applicable, fast-curing, solvent-free 2K polyurethane primer for indoor and outdoor use. The primer is also suitable for indoor use. This 2K system also allows for application at low temperatures and rapid curing even in low humidity.\u003c\/p\u003e\n\n\u003cp\u003eIf you plan to seal and waterproof untreated asphalt, bitumen, stone, and concrete surfaces, we recommend applying this BK-636PU primer beforehand to ensure excellent adhesion to most common construction surfaces. BK-636PU prevents rising moisture from pushing up and delaminating the seal and waterproofing over time. \u003c\/p\u003e\n\n\u003cp\u003eThe rapid drying of the primer allows for the sealing and waterproofing of common construction surfaces on the same day in the second step with our BK-635PU 1K PU sealant in clear or tinted in various colors.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eYour benefits\u003c\/strong\u003e\u003cbr\u003e\n- Blocks oils from bitumen membranes and asphalt\u003cbr\u003e\n- Universally applicable\u003cbr\u003e\n- Solvent \u0026amp; VOC-free\u003cbr\u003e\n- Very fast curing\u003cbr\u003e\n- Recoatable after 2-3 hours\u003cbr\u003e\n- Excellent adhesion to most common construction surfaces\u003cbr\u003e\n- Application possible at very low temperatures in winter\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMatching additional products\u003c\/strong\u003e\u003cbr\u003e\n- BK-635PU 1K PU sealant\u003cbr\u003e\n- BK-605PU stone resin set for outdoor use\u003cbr\u003e\n- BE-79W short-pile paint roller\u003cbr\u003e\n- LS-565 rust stain remover for stone\u003cbr\u003e\n- BE-800 concrete cleaner\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct data\u003c\/strong\u003e\u003cbr\u003e\n- Color: clear\u003cbr\u003e\n- Mixing ratio: 2 parts component A : 3 parts component B\u003cbr\u003e\n- Working time: approx. 30 min, depending on temperature and ambient humidity\u003cbr\u003e\n- Coverage: min. 100 g\/m² per coat, depending on the substrate\u003cbr\u003e\n- Application: roller, squeegee, spray\u003cbr\u003e\n- Tool cleaning: LS-711 thinner\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDrying \/ Temperature\u003c\/strong\u003e\u003cbr\u003e\n- Tack-free at 20°C: after approx. 2 hours\u003cbr\u003e\n- Recoatable at 20°C: after approx. 2-3 hours\u003cbr\u003e\n- Application temperature: +5°C to +35°C\u003cbr\u003e\n- Storage: 12 months at temperatures of +5 to +25°C\u003cbr\u003e\n- Moisture in the substrate: \u0026lt; 5%\u003cbr\u003e\n- Relative ambient humidity: \u0026lt; 85%\u003cbr\u003e\n- Dew point: the temperature must be at least \u0026gt;3°C above the dew point.\u003c\/p\u003e\n\n\u003cp\u003eWork quickly with the primer, as the resulting exotherm can cause the mass to heat up rapidly and even begin to smoke. Therefore, pour the mass onto the substrate and spread it quickly and evenly. We recommend sanding substrates that will not be further processed on the same day with BK-705 quartz sand. If you wait longer than 24 hours, the primer must be sanded with sandpaper before you continue working.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate preparation:\u003c\/strong\u003e\u003cbr\u003e\nSubstrates must be structurally sound and free from separating layers (e.g., grease or wax), cracks, loose parts, hollow areas, and burrs. Substrates such as reinforced concrete, screed, wood, fiber cement, old but well-adhering acrylic, bitumen, and foil coatings, as well as sanded tile surfaces, can thus be primed quickly. Plastics must be tested beforehand by the applicator for adhesion. Grind the substrate using diamond grinding discs, sandblasting, or shot blasting. Structurally sound bituminous substrates must be thoroughly cleaned beforehand with a high-pressure water jet. No thinning is permitted on bituminous substrates, as the solvent will melt the bituminous substrate. \u003c\/p\u003e\n\n\u003cp\u003eWear appropriate protective clothing during application, such as safety goggles, disposable gloves, and, if necessary, respiratory protection masks.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMixing:\u003c\/strong\u003e\u003cbr\u003e\nMix both components using a low-speed mixer for approx. 90 seconds into a homogeneous mass. Then transfer the material to a mixing bucket and mix the mass for approx. another 30 seconds to avoid mixing errors. The material is now workable for approx. 15-30 minutes, depending on the temperature, ambient humidity, and container size. \u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"3x 1kg","offer_id":61306014433614,"sku":"BK6360003","price":97.9,"currency_code":"EUR","in_stock":true},{"title":"2x 1kg","offer_id":61306007060814,"sku":"BK6360002","price":67.9,"currency_code":"EUR","in_stock":true},{"title":"1kg","offer_id":54516414185806,"sku":"BK6360001","price":42.9,"currency_code":"EUR","in_stock":true},{"title":"4kg","offer_id":61305504235854,"sku":"6360004","price":127.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/BK-636PU_Produktbild.jpg?v=1786609051"},{"product_id":"bk-305pu-balkonbeschichtung-abdichtung-in-grau","title":"BK-305PU Balcony Coating \u0026 Waterproofing Set in Grey","description":"\u003cp\u003e\u003cstrong\u003e1K PU balcony coating and waterproofing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe set consists of\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e1. PU coating:\u003c\/strong\u003e\u003cbr\u003e\nLatest generation fast-curing, solvent-based 1K liquid polyurethane for waterproofing seamless outdoor surfaces. Bubble-free, fast-curing, and all-year-round application thanks to the \"Humidity Activated Accellerator\" technology.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2. PU primer:\u003c\/strong\u003e\u003cbr\u003e\nVery fast-curing, low-viscosity, solvent-based, 1-component primer for outdoor use. The primer is a low-viscosity, fast-drying polyurethane-based primer suitable for many substrates. It is suitable for both non-porous and porous substrates.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3. Tools:\u003c\/strong\u003e\u003cbr\u003e\n2 x short-pile paint rollers 10cm and 25cm + stirring stick for mixing the paint\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct data 1K PU primer\u003c\/strong\u003e\u003cbr\u003e\n- Color: colorless\u003cbr\u003e\n- Coverage: min. 150g\/sqm per coat, depending on the substrate\u003cbr\u003e\n- Tack-free at 25°C: after 1-2 hrs.\u003cbr\u003e\n- Recoatable at 25°C: after 1-2 hrs.\u003cbr\u003e\n- Application temperature +5°C - +35°C\u003cbr\u003e\n- Storage: 12 months at temperatures of +5 - +25°C\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct data 1K PU coating\u003c\/strong\u003e\u003cbr\u003e\n- Consumption: min. 1.5kg\/sqm, 2.6kg\/sqm is recommended for commercial use\u003cbr\u003e\n- Application temperature: +5-+35°C\u003cbr\u003e\n- Dew point: the temperature must be at least \u0026gt;3°C above the dew point\u003cbr\u003e\n- Application: brush, squeegee, paint roller or by airless spraying\u003cbr\u003e\n- Drying time at 20-25°C: Tack-free after approx. 2-3 hrs. \/ Recoatable after approx. 6-12 hrs.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate preparation: \u003c\/strong\u003e\u003cbr\u003e\nSubstrates must be structurally sound and free from separating layers, cracks, loose parts, pinholes and burrs. Remove grease, wax, cement slurry and all other adhesion-reducing substances. Sand the substrate. Then prime the substrates.\u003c\/p\u003e\n\n\u003cp\u003eWear appropriate protective clothing during application, such as: safety glasses, disposable gloves, and respiratory masks if necessary. Apply the primer and coating using a squeegee or paint roller. Apply the material quickly and evenly. Highly absorbent substrates must be primed again. We recommend sanding the primer with BK-705 quartz sand if it is not to be further processed on the same day.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"5 sqm","offer_id":54757301190990,"sku":"BK305PU001","price":229.9,"currency_code":"EUR","in_stock":true},{"title":"20sqm","offer_id":54757301256526,"sku":"BK305PU003","price":749.9,"currency_code":"EUR","in_stock":true},{"title":"10 sqm","offer_id":54757301223758,"sku":"BK305PU002","price":399.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/bekateq2500x2500bekfinalkopieb987cf06-0d88-4f25-8015-4b859d14888djpg-6676.jpg?v=1769177028"},{"product_id":"d-90w-1k-pu-abdichtung-innen-und-aussen","title":"D.90W 1K PU sealant in blue for interior and exterior use","description":"\u003cp\u003e\u003c!-- x-tinymce\/html --\u003e\u003c\/p\u003e\n\n\u003cp\u003eUnique, \u003cstrong\u003ehighly elastic, one-component liquid plastic membrane\u003c\/strong\u003e, based on an aqueous polyurethane dispersion. The proven technology of polyurethane in combination with aqueous systems enables application indoors and outdoors, as well as in the swimming pool area. Fast-curing aliphatic, solvent-free, water-based 1K polyurethane liquid plastic on a dispersion basis. Tested as a surface protection system and as a composite waterproofing system under tiles indoors and outdoors, as well as in the swimming pool area.\u003c\/p\u003e\n\n\u003cp\u003eBy adding 15% water, the waterproofing can be applied as a primer on standard construction substrates such as wood, concrete, screed, plasterboard, etc.\u003c\/p\u003e\n\n\u003cp\u003eWaterproofing for concrete, screed, wood, metal, fiber cement, plasterboard, plaster, reinforced concrete, ceramic, tiles, tiles, aluminum, steel. For bitumen or asphalt, you require the BK-636PU 2K PU primer as a primer. Suitable for waterproofing balconies, terraces, showers, swimming pools (under tiles), and under tiles.\u003c\/p\u003e\n\n\u003cp\u003eNOT suitable for stone resin installations. The waterproofing can also not be used as a standalone coating.\u003c\/p\u003e\n\n\u003cp\u003e+ seamless, bubble-free and defect-free surfaces\u003cbr\u003e\n+ rapid through-curing\u003cbr\u003e\n+ easy application\u003cbr\u003e\n+ weather- and UV-resistant\u003cbr\u003e\n+ aliphatic \u0026amp; non-yellowing\u003cbr\u003e\n+ permanently load-bearing up to +90°C\u003cbr\u003e\n+ good chemical resistance\u003cbr\u003e\n+ vapor-permeable membrane\u003cbr\u003e\n+ suitable for airless application\u003cbr\u003e\n+ primer is prepared by adding 15% water\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003cbr\u003e\n- Color: blue\u003cbr\u003e\n- Consumption: min. 1.5 kg\/m², 2 kg\/m² recommended\u003cbr\u003e\n- Application temperature: +5 to +35°C\u003cbr\u003e\n- Dew point: the temperature must be at least \u0026gt;3°C above the dew point\u003cbr\u003e\n- Application: brush, squeegee, paint roller, or airless application\u003cbr\u003e\n- Shelf life: min. 12 months, store in a cool and frost-free place\u003cbr\u003e\n- Drying time at 25°C: tack-free after approx. 1-2 hours \/ recoatable after approx. 4-48 hours\u003c\/p\u003e\n\n\u003cp\u003eProtect from rain, dew, moisture, and frost during drying and application.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e: Substrates must be load-bearing and free from separating layers, cracks, loose parts, voids, and burrs. Remove grease, wax, cement slurry, and all other adhesion-reducing substances. Grind the substrate using diamond grinding discs, sandblasting, or shot blasting. The substrates are then primed. Standard construction substrates such as wood, concrete, screed, plasterboard, plaster, etc. can be primed with DICHTON D.90W diluted with 15% water. For asphalt or bitumen, the BK-636PU 2K PU primer must be applied.\u003cbr\u003e\nBond strength and compressive strength \u0026gt;1.5 N\/mm²\u003cbr\u003e\nMoisture in the substrate \u0026lt;5%\u003cbr\u003e\nRelative ambient humidity \u0026lt;80%\u003cbr\u003e\nDew point: the temperature must be at least \u0026gt;3°C above the dew point\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: During application, wear appropriate protective clothing, such as safety goggles, disposable gloves, and, if necessary, respiratory protection masks. For airless application, add 5-10% water beforehand and mix it in using a dissolver. Apply the material evenly. Depending on the levelness and roughness of the substrate, at least 1.5 kg\/m² is required; 2 kg\/m² is recommended. Apply the material evenly in 2 coats as described above to the already primed substrate. Each coat must be completely dry before applying the next coat.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSystem fleece\u003c\/strong\u003e: In connection areas, you can embed our system fleece bubble- and wrinkle-free. Apply approx. 2\/3 in the first coat. Embed the system fleece and recoat the system fleece wet-on-wet with the remaining quantity until it is glossy. Matte surfaces indicate a layer thickness that is too low. If you wish to recoat the D.90W, the layer must be sanded with sandpaper.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"2x 5kg","offer_id":60150071689550,"sku":"D90W00002","price":97.9,"currency_code":"EUR","in_stock":true},{"title":"5kg","offer_id":54994419810638,"sku":"D90W00001","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/farbeimerkopie38237bde-b4cc-4938-b592-1cdf36452075jpg-334581.jpg?v=1767358482"},{"product_id":"d-89w-1k-pu-abdichtung-faserverstarkt-fur-aussen","title":"D.89W 1K PU waterproofing liquid plastic fiber-reinforced for exterior use","description":"\u003cp\u003e\u003cstrong\u003e1K PU waterproofing in grey \u003c\/strong\u003e\u003cstrong\u003efiber-reinforced for exterior use - \u003c\/strong\u003efast-curing, solvent-based, fiber-reinforced, 1K liquid polyurethane of the latest generation with integrated glass fiber reinforcement. For fleece-free detail waterproofing in outdoor areas. The \"Humidity Activated Accellerator\" technology enables a bubble-free, cold-processable and cold-curing polyurethane membrane.\u003c\/p\u003e\n\n\u003cp\u003eThe D.89W liquid plastic waterproofing and coating system is weather-, UV- and hydrolysis-resistant, thus ensuring permanent protection of the building fabric. The reinforced technology of polyurethane in combination with the new catalyst system now enables us to incorporate the moisture-reactive catalyst. This cross-links very quickly with the moisture of the environment even in thick layer thicknesses to form a bubble-free membrane.\u003c\/p\u003e\n\n\u003cp\u003eWaterproofing for flat roofs and other surfaces on concrete, screed, reinforced concrete, steel, stainless steel, tiles, bitumen* and membrane repair (EPDM, PVC FPO \/ TPO) as well as waterproofing and detail waterproofing for balconies, terraces, in timber construction, for railing supports, etc.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCertified waterproofing system\u003c\/strong\u003e - \u003cstrong\u003eETAG 005 approval, W3\u003c\/strong\u003e.: Technical approvals for liquid-applied waterproofing. Meets the highest requirement level for service life.\u003c\/p\u003e\n\n\u003cp\u003e+ bubble- and defect-free surfaces\u003cbr\u003e\n+ rapid through-curing\u003cbr\u003e\n+ weather- and UV-resistant\u003cbr\u003e\n+ permanently load-resistant up to +90°C. 200°C shock temperature.\u003cbr\u003e\n+ excellent mechanical properties due to high stretchability, tensile and tear strength\u003cbr\u003e\n+ good chemical resistance\u003cbr\u003e\n+ vapor-permeable membrane\u003cbr\u003e\n+ for airless application, it can be thinned with LS-711 by 5-10%\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMatching additional products\u003c\/strong\u003e\u003cbr\u003e\n- BEKATEQ BK-637PU 1K PU primer for exterior use\u003cbr\u003e\n- BEKATEQ BK-636PU 2K PU primer for bitumen or asphalt\u003cbr\u003e\n- DICHTON D.88W 1K PU waterproofing for exterior use\u003cbr\u003e\n- BE-79W short-pile paint roller\u003cbr\u003e\n- BK-705 quartz sand for sprinkling\u003cbr\u003e\n- LS-711 thinner\u003cbr\u003e\n- BE-800 floor cleaner\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAreas of application\u003c\/strong\u003e\u003cbr\u003e\n- Flat roof waterproofing\u003cbr\u003e\n- Basement and foundation waterproofing\u003cbr\u003e\n- Insulation in roof, wall and basement areas\u003cbr\u003e\n- Floor coatings for indoor and outdoor areas\u003cbr\u003e\n- Waterproofing in sanitary areas (e.g. showers, etc.)\u003cbr\u003e\n- Pool, drinking water and container coatings\u003cbr\u003e\n- Crack injection\u003cbr\u003e\n- Highly elastic joint sealants\u003cbr\u003e\n- Stone resin flooring for indoor and outdoor areas\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDetail waterproofing \/ waterproofing of complex components\u003c\/strong\u003e\u003cbr\u003e\n- Wall and floor connections\u003cbr\u003e\n- Pipe penetrations\u003cbr\u003e\n- Skylights\u003cbr\u003e\n- Connections\u003cbr\u003e\n- Sleeves and corners\u003cbr\u003e\n- Flashing frames\u003cbr\u003e\n- Gutters\u003cbr\u003e\n- Piping\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\n- Consumption: min. 1.5kg\/sqm, for commercial use 2.6kg\/sqm is recommended\u003cbr\u003e\n- Application temperature +5 to +35°C\u003cbr\u003e\n- Dew point: the temperature must be at least \u0026amp;gt;3°C above the dew point\u003cbr\u003e\n- Application: brush, squeegee, paint roller or airless application\u003cbr\u003e\n- Drying time at 20-25°C: Tack-free after approx. 2-3 hrs \/ Recoatable after approx. 6-12 hrs.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e: Substrates must be load-bearing, free from separating layers, cracks, loose parts, voids and burrs. Remove grease, wax, cement slurry and all other adhesion-reducing substrates. Grind the substrate using diamond grinding discs, sand or shot blast. Load-bearing bituminous substrates as well as membranes (EPDM, PVC, FPO \/ TPO) must be thoroughly cleaned with a high-pressure water jet beforehand. Afterwards, the substrates are treated with the BK-637PU 1K PU primer or the BK-636PU 2K PU primer for bituminous substrates.\u003cbr\u003e\nAdhesion pull-off and compression strength \u0026gt;1.5N\/mm²\u003cbr\u003e\nMoisture in the substrate \u0026lt; 5%\u003cbr\u003e\nRelative ambient humidity \u0026lt; 80%\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: During application, wear appropriate protective clothing such as: safety goggles, disposable gloves, and if necessary, respiratory protection masks. For airless application, add 5-10% LS-711 thinner beforehand and mix it in using a dissolver. Apply the material evenly. Depending on the levelness and roughness of the substrate, at least 1.5kg\/sqm is required. Apply approx. 2\/3 of the quantity in the first coat. Apply the remainder wet-on-wet until it is glossy. \u003c\/p\u003e\n\n\u003cp\u003eIf you are working according to the European waterproofing standard, you need 2.6kg\/sqm. Optionally, you can embed our system fleece bubble- and wrinkle-free. Overcoat the system fleece wet-on-wet with the remaining quantity until it is glossy. Matte surfaces indicate too low a layer thickness. If you wish to recoat the D.89W, this layer must be sanded with sandpaper.\u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"2 x 1kg","offer_id":55311159591246,"sku":"D89W-2","price":49.9,"currency_code":"EUR","in_stock":true},{"title":"5kg","offer_id":55311159689550,"sku":"D89W-6","price":107.9,"currency_code":"EUR","in_stock":true},{"title":"1kg","offer_id":55311159394638,"sku":"D89W-1","price":34.9,"currency_code":"EUR","in_stock":true},{"title":"3 x 1kg","offer_id":55311159525710,"sku":"D89W-3","price":69.9,"currency_code":"EUR","in_stock":true},{"title":"4 x 1kg","offer_id":59489014579534,"sku":"D89W-5","price":87.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/bekateq2500x2500bekfinalkopie5a20d289-6cf1-4344-b1bf-283837f44636jpg-376643.jpg?v=1774873470"},{"product_id":"bk-637pu-1k-pu-grundierung","title":"BK-637PU 1K PU Primer for Exterior Use","description":"\u003cp\u003e\u003cstrong\u003e1K PU Primer \u003c\/strong\u003eis a very fast-curing, low-viscosity, solvent-based, 1-component primer for \u003cstrong\u003eoutdoor\u003c\/strong\u003e use. BK-637PU is a low-viscosity, fast-drying polyurethane-based primer suitable for many substrates. It is suitable for both non-porous and porous substrates.\u003c\/p\u003e\n\n\u003cp\u003eIf you plan to seal and waterproof untreated stone and concrete surfaces, we strongly recommend using BK-637PU as a primer. BK-637PU prevents rising moisture from pushing up and detaching the sealing and waterproofing over time.\u003c\/p\u003e\n\n\u003cp\u003eThe rapid drying of the primer allows for the sealing and waterproofing of balconies \u0026amp; terraces on the same day in the second working step with our BK-635PU 1K PU sealer in clear or tinted in various colors.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eYour advantages\u003c\/strong\u003e\u003cbr\u003e\n- 1-component - easy to apply\u003cbr\u003e\n- Alkali- and moisture-resistant\u003cbr\u003e\n- Vapor-permeable\u003cbr\u003e\n- Very fast drying\u003cbr\u003e\n- No hardener required\u003cbr\u003e\n- Suitable for smooth as well as open-pored\/absorbent substrates\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMatching additional products\u003c\/strong\u003e\u003cbr\u003e\n- BK-635PU 1K PU sealer\u003cbr\u003e\n- BK-605PU stone carpet set for outdoors\u003cbr\u003e\n- BE-79W short-pile paint roller\u003cbr\u003e\n- LS-711 thinner\u003cbr\u003e\n- LS-565 rust stain remover for stone\u003cbr\u003e\n- BE-800 concrete cleaner\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct data\u003c\/strong\u003e\u003cbr\u003e\n- Color: clear\u003cbr\u003e\n- Coverage: min. 150g\/sqm per coat, depending on the substrate\u003cbr\u003e\n- Tack-free at 25°C: after 1-2 hrs.\u003cbr\u003e\n- Recoatable at 25°C: after 1-2 hrs.\u003cbr\u003e\n- Application temperature +5°C - +35°C\u003cbr\u003e\n- Storage: 12 months at temperatures of +5 - +25°C\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate preparation: \u003c\/strong\u003e\u003cbr\u003e\nSubstrates must be structurally sound and free from separating layers, cracks, loose parts, pinholes and burrs. Remove grease, wax, cement slurry and all other adhesion-reducing substances. Sand the substrate. After that, the substrates are primed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003e\nWear appropriate protective clothing during application, such as: safety glasses, disposable gloves, and respiratory masks if necessary. Apply the primer using a squeegee, paint roller or airless sprayer. No further dilution is necessary when using an airless sprayer. Apply the material quickly and evenly without puddles on the substrate. Depending on the flatness and porosity of the substrate, 100-300g\/sqm is required for priming. Very absorbent substrates must be primed again. We recommend sanding substrates that will not be further processed on the same day with BK-705 quartz sand.\u003c\/p\u003e\n","brand":"BEKATEQ","offers":[{"title":"1L","offer_id":55311812657486,"sku":"6370001","price":34.9,"currency_code":"EUR","in_stock":true},{"title":"2x 1L","offer_id":55311812886862,"sku":"6370002","price":57.9,"currency_code":"EUR","in_stock":true},{"title":"3x 1L","offer_id":55311812985166,"sku":"6370003","price":77.9,"currency_code":"EUR","in_stock":true},{"title":"5x 1L","offer_id":55311813083470,"sku":"6370005","price":122.9,"currency_code":"EUR","in_stock":true},{"title":"10x 1L","offer_id":55311813214542,"sku":"6370010","price":227.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/bk-637pu02dose-kleinjpg-433189.jpg?v=1793794577"},{"product_id":"d-88w-1k-pu-abdichtung-fur-aussen","title":"D.88W 1K PU Liquid Waterproofing Membrane for Exterior Use","description":"\u003cp\u003e\u003c!-- x-tinymce\/html --\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e1K PU waterproofing in grey \u003c\/strong\u003e\u003cstrong\u003efor exterior use - \u003c\/strong\u003efast-curing, solvent-based, latest-generation 1K polyurethane liquid plastic. For fleece-free detail waterproofing outdoors. The \"Humidity Activated Accellerator\" technology enables a bubble-free, cold-processable, and cold-curing polyurethane membrane.\u003c\/p\u003e\n\n\u003cp\u003eThe D.88W liquid plastic waterproofing and coating system is weather-, UV-, and hydrolysis-resistant, thus ensuring permanent protection of the building fabric. The proven technology of polyurethane in combination with the new catalyst system now enables us to incorporate the moisture-reactive catalyst. This cross-links very quickly even in thick layer thicknesses with the moisture of the environment to form a bubble-free membrane.\u003c\/p\u003e\n\n\u003cp\u003eWaterproofing for flat roofs and other surfaces on concrete, screed, reinforced concrete, steel, stainless steel, tiles, bitumen* and membrane renovation (EPDM, PVC FPO \/ TPO) as well as waterproofing and detail waterproofing for balconies, terraces, in timber construction, for railing supports, etc.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCertified waterproofing system\u003c\/strong\u003e - \u003cstrong\u003eETAG 005 approval, W3\u003c\/strong\u003e.: Technical approvals for liquid-applied waterproofing. Meets the highest requirement level for service life.\u003c\/p\u003e\n\n\u003cp\u003e+ bubble- and defect-free surfaces\u003cbr\u003e\n+ rapid through-curing\u003cbr\u003e\n+ weather- and UV-resistant\u003cbr\u003e\n+ continuously load-bearing up to +90°C. 200°C shock temperature.\u003cbr\u003e\n+ excellent mechanical properties due to high stretchability, tensile and tear strength\u003cbr\u003e\n+ good chemical resistance\u003cbr\u003e\n+ vapor-permeable membrane\u003cbr\u003e\n+ for airless application, it can be diluted with LS-711 by 5-10%\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMatching auxiliary products\u003c\/strong\u003e\u003cbr\u003e\n- BEKATEQ BK-637PU 1K PU primer for exterior use\u003cbr\u003e\n- BEKATEQ BK-636PU 2K PU primer for bitumen or asphalt\u003cbr\u003e\n- DICHTON D.89W 1K PU waterproofing exterior fiber-reinforced\u003cbr\u003e\n- BE-79W short-pile paint roller\u003cbr\u003e\n- BK-705 quartz sand for sprinkling\u003cbr\u003e\n- LS-711 thinner\u003cbr\u003e\n- BE-800 floor cleaner\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAreas of application\u003c\/strong\u003e\u003cbr\u003e\n- Flat roof waterproofing\u003cbr\u003e\n- Basement and foundation waterproofing\u003cbr\u003e\n- Insulation in roof, wall, and basement areas\u003cbr\u003e\n- Floor coatings indoors and outdoors\u003cbr\u003e\n- Waterproofing in sanitary areas (e.g. showers, etc.)\u003cbr\u003e\n- Pool, drinking water, and container coatings\u003cbr\u003e\n- Crack injection\u003cbr\u003e\n- Highly elastic joint sealants\u003cbr\u003e\n- Stone resin flooring for indoor and outdoor areas\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDetail waterproofing \/ waterproofing of complex components\u003c\/strong\u003e\u003cbr\u003e\n- Wall and floor connections\u003cbr\u003e\n- Pipe penetrations\u003cbr\u003e\n- Skylights\u003cbr\u003e\n- Connections\u003cbr\u003e\n- Sleeves and corners\u003cbr\u003e\n- Flashing frames\u003cbr\u003e\n- Gutters\u003cbr\u003e\n- Piping\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\n- Consumption: min. 1.5kg\/sqm, for commercial use 2.6kg\/sqm is recommended\u003cbr\u003e\n- Application temperature +5 to +35°C\u003cbr\u003e\n- Dew point: the temperature must be min. \u0026gt;3°C above the dew point\u003cbr\u003e\n- Application: brush, squeegee, paint roller, or airless application\u003cbr\u003e\n- Drying time at 20-25°C: Tack-free after approx. 2-3 hrs \/ Recoatable after approx. 6-12 hrs.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e: Substrates must be load-bearing, free of separating layers, cracks, loose parts, voids, and burrs. Remove grease, wax, cement slurry, and all other adhesion-reducing substrates. Grind the substrate using diamond grinding discs, sand, or shot blast. Load-bearing bituminous substrates as well as membranes (EPDM, PVC, FPO \/ TPO) must be thoroughly cleaned with a high-pressure water jet beforehand. Then the substrates are treated with the BK-637PU 1K PU primer or the BK-636PU 2K PU primer for bituminous substrates.\u003cbr\u003e\nAdhesion pull-off and compression strength \u0026gt;1.5N\/mm²\u003cbr\u003e\nMoisture in the substrate \u0026lt; 5%\u003cbr\u003e\nRelative ambient humidity \u0026lt; 80%\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: Wear appropriate protective clothing during application, such as: safety goggles, disposable gloves, and if necessary, respiratory protection masks. For airless application, add 5-10% LS-711 thinner beforehand and mix it in using a dissolver. Apply the material evenly. Depending on the levelness and roughness of the substrate, min. 1.5kg\/sqm is required. Apply approx. 2\/3 of the quantity in the first coat. Apply the rest wet-on-wet until it is glossy. \u003c\/p\u003e\n\n\u003cp\u003eIf you are working according to the European waterproofing standard, you need 2.6kg\/sqm. Optionally, you can embed our system fleece bubble- and wrinkle-free. Recoat the system fleece wet-on-wet with the remaining quantity until it is glossy. Matte surfaces indicate too thin a layer thickness. If you want to recoat the D.89W, this layer must be sanded with sandpaper.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"2x 1kg","offer_id":59897359499598,"sku":"D88W00002","price":47.9,"currency_code":"EUR","in_stock":true},{"title":"1kg","offer_id":55316445102414,"sku":"D88W00001","price":32.9,"currency_code":"EUR","in_stock":true},{"title":"6 kg","offer_id":55316456931662,"sku":"D88W00006","price":117.9,"currency_code":"EUR","in_stock":true},{"title":"3x 1kg","offer_id":59897359532366,"sku":"D88W00003","price":67.9,"currency_code":"EUR","in_stock":true},{"title":"5x 1kg","offer_id":59897359565134,"sku":"D88W00005","price":107.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/bekateq2500x2500bekfinalkopie78892dda-0c58-45b6-9439-a950084f78e9jpg-356284.jpg?v=1770299973"},{"product_id":"d-31w-brandschutz-dichtstoff-fuer-kamin-ofen-schamotte","title":"D.31W Fire-resistant sealant for chimney + oven + fireclay up to 1600°C","description":"\u003cp\u003e\u003cstrong\u003eFire-Resistant Sealant\u003cbr\u003e\nChimneys + Ovens + Fireclay\u003cbr\u003e\nup to 1600°C\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFire-resistant sealant for quickly repairing, sealing, bonding and grouting chimneys, ovens, fireplaces, fireproof stones \u0026amp; stoves. Easy and durable repair \u0026amp; sealing of fire-resistant materials. Adheres without primer to concrete, aluminum, fireclay, glass, steel \u0026amp; iron. Its excellent mechanical properties prevent the spread of fire, smoke and gases.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFire resistance test: REI 180\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct details\u003c\/strong\u003e\u003cbr\u003e\nEasy to apply\u003cbr\u003e\nExcellent adhesion to concrete, metal, glass\u003cbr\u003e\nHeat \u0026amp; cold resistant from -20°C to 1600°C\u003cbr\u003e\nTested for DIN fire resistance\u003cbr\u003e\nExcellent mechanical properties\u003cbr\u003e\nAsbestos-free\u003cbr\u003e\nEasy to apply, even in vertical joints\u003cbr\u003e\nPrevents the spread of fire, smoke and gases\u003cbr\u003e\nOdorless\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003cbr\u003e\nContents: 300ml\u003cbr\u003e\nColor: black\u003cbr\u003e\nCoverage: depending on application\u003cbr\u003e\nTemperature resistance: from -20°C to +1600°C\u003cbr\u003e\nDrying time: approx. 1-2 hours at 20°C\u003cbr\u003e\nApplication temperature: +5°C to +35°C\u003cbr\u003e\nIgnition temperature: non-flammable and non-combustible\u003cbr\u003e\nStorage: store sealed, dry, cool and frost-free, shelf life: min. 12 months\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSurface preparation\u003c\/strong\u003e: The surface to be sealed must be firm, clean, dust- and grease-free. Remove all loose parts. The surface must be moistened before application.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eJoint and cartridge preparation:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eCut off the top of the cartridge and screw on the cartridge nozzle, which is then cut at an angle depending on the joint width. Insert the cartridge into the gun. If work is interrupted or the cartridge is replaced, release the lever of the caulking gun and retract the piston.\u003c\/li\u003e\n\n\t\u003cli\u003eSqueeze the material into the joint and smooth it immediately after application with a spatula or damp cloth. Remove excess material before it hardens.\u003c\/li\u003e\n\n\t\u003cli\u003eCuring takes 24 hours, after which the material should be heated slowly.\u003c\/li\u003e\n\n\t\u003cli\u003eAs a result of the sealant's volume loss during curing, small cracks may appear on the surface. These can be removed by applying an additional layer, which bonds with the first layer.\u003c\/li\u003e\n\n\t\u003cli\u003eClean application accessories immediately after use with water, as the hardened material is very difficult to remove.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eDisposal\u003c\/strong\u003e: Only empty containers should be recycled. Material residues can be disposed of at a suitable landfill in accordance with local regulations.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e: Store for at least 12 months at +10°C to +25°C in unopened packaging in a dry place. Do not store near cold or hot objects.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"2 x 300ml","offer_id":60301229064526,"sku":"310003","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1 x 300ml","offer_id":60301228605774,"sku":"310002","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/2png-398644.png?v=1785839172"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/collections\/239941895_l5_36352f78-0380-458a-99ed-ae61b4431233.jpg?v=1779805975","url":"https:\/\/www.bekateq.de\/en\/collections\/zubehor-kleber-abdichtung-abdichtungsmasse.oembed","provider":"BEKATEQ","version":"1.0","type":"link"}