{"product_id":"d-90w-1k-pu-abdichtung-innen-und-aussen","title":"D.90W 1K PU sealant in blue for interior and exterior use","description":"\u003cp\u003e\u003c!-- x-tinymce\/html --\u003e\u003c\/p\u003e\n\n\u003cp\u003eUnique, \u003cstrong\u003ehighly elastic, one-component liquid plastic membrane\u003c\/strong\u003e, based on an aqueous polyurethane dispersion. The proven technology of polyurethane in combination with aqueous systems enables application indoors and outdoors, as well as in the swimming pool area. Fast-curing aliphatic, solvent-free, water-based 1K polyurethane liquid plastic on a dispersion basis. Tested as a surface protection system and as a composite waterproofing system under tiles indoors and outdoors, as well as in the swimming pool area.\u003c\/p\u003e\n\n\u003cp\u003eBy adding 15% water, the waterproofing can be applied as a primer on standard construction substrates such as wood, concrete, screed, plasterboard, etc.\u003c\/p\u003e\n\n\u003cp\u003eWaterproofing for concrete, screed, wood, metal, fiber cement, plasterboard, plaster, reinforced concrete, ceramic, tiles, tiles, aluminum, steel. For bitumen or asphalt, you require the BK-636PU 2K PU primer as a primer. Suitable for waterproofing balconies, terraces, showers, swimming pools (under tiles), and under tiles.\u003c\/p\u003e\n\n\u003cp\u003eNOT suitable for stone resin installations. The waterproofing can also not be used as a standalone coating.\u003c\/p\u003e\n\n\u003cp\u003e+ seamless, bubble-free and defect-free surfaces\u003cbr\u003e\n+ rapid through-curing\u003cbr\u003e\n+ easy application\u003cbr\u003e\n+ weather- and UV-resistant\u003cbr\u003e\n+ aliphatic \u0026amp; non-yellowing\u003cbr\u003e\n+ permanently load-bearing up to +90°C\u003cbr\u003e\n+ good chemical resistance\u003cbr\u003e\n+ vapor-permeable membrane\u003cbr\u003e\n+ suitable for airless application\u003cbr\u003e\n+ primer is prepared by adding 15% water\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003cbr\u003e\n- Color: blue\u003cbr\u003e\n- Consumption: min. 1.5 kg\/m², 2 kg\/m² recommended\u003cbr\u003e\n- Application temperature: +5 to +35°C\u003cbr\u003e\n- Dew point: the temperature must be at least \u0026gt;3°C above the dew point\u003cbr\u003e\n- Application: brush, squeegee, paint roller, or airless application\u003cbr\u003e\n- Shelf life: min. 12 months, store in a cool and frost-free place\u003cbr\u003e\n- Drying time at 25°C: tack-free after approx. 1-2 hours \/ recoatable after approx. 4-48 hours\u003c\/p\u003e\n\n\u003cp\u003eProtect from rain, dew, moisture, and frost during drying and application.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e: Substrates must be load-bearing and free from separating layers, cracks, loose parts, voids, and burrs. Remove grease, wax, cement slurry, and all other adhesion-reducing substances. Grind the substrate using diamond grinding discs, sandblasting, or shot blasting. The substrates are then primed. Standard construction substrates such as wood, concrete, screed, plasterboard, plaster, etc. can be primed with DICHTON D.90W diluted with 15% water. For asphalt or bitumen, the BK-636PU 2K PU primer must be applied.\u003cbr\u003e\nBond strength and compressive strength \u0026gt;1.5 N\/mm²\u003cbr\u003e\nMoisture in the substrate \u0026lt;5%\u003cbr\u003e\nRelative ambient humidity \u0026lt;80%\u003cbr\u003e\nDew point: the temperature must be at least \u0026gt;3°C above the dew point\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: During application, wear appropriate protective clothing, such as safety goggles, disposable gloves, and, if necessary, respiratory protection masks. For airless application, add 5-10% water beforehand and mix it in using a dissolver. Apply the material evenly. Depending on the levelness and roughness of the substrate, at least 1.5 kg\/m² is required; 2 kg\/m² is recommended. Apply the material evenly in 2 coats as described above to the already primed substrate. Each coat must be completely dry before applying the next coat.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSystem fleece\u003c\/strong\u003e: In connection areas, you can embed our system fleece bubble- and wrinkle-free. Apply approx. 2\/3 in the first coat. Embed the system fleece and recoat the system fleece wet-on-wet with the remaining quantity until it is glossy. Matte surfaces indicate a layer thickness that is too low. If you wish to recoat the D.90W, the layer must be sanded with sandpaper.\u003c\/p\u003e\n","brand":"DICHTON","offers":[{"title":"2x 5kg","offer_id":60150071689550,"sku":"D90W00002","price":97.9,"currency_code":"EUR","in_stock":true},{"title":"5kg","offer_id":54994419810638,"sku":"D90W00001","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/9131\/9328\/files\/farbeimerkopie38237bde-b4cc-4938-b592-1cdf36452075jpg-334581.jpg?v=1767358482","url":"https:\/\/www.bekateq.de\/en\/products\/d-90w-1k-pu-abdichtung-innen-und-aussen","provider":"BEKATEQ","version":"1.0","type":"link"}