BE-201 Hardwood Oil Wood Oil for Refreshing and Care
Shipping cost: 4,95€ within Germany
Free returns
Description
The high-quality wood oil is suitable for both indoor and outdoor use. The BEKATEQ furniture oil penetrates deep into the wood, making it durable, water-repellent and weather-resistant. It deepens the wood colour and enhances the contrast of the grain, while the wood retains its natural appearance and feel.
The protective coating remains flexible over time and deepens the colour. The surface can easily be refreshed or repaired by applying another coat of BEKATEQ BE-201 furniture oil.
Quality that impresses
- Easy to apply
- Durable
- Penetrates deeply and fills the pores
- Dirt- and water-repellent Suitable for indoor and outdoor use
- The surface can continue to be cleaned
- No solvents, aromatics, drying agents or preservatives
Protecting wood surfaces: The furniture oil penetrates deeply into the wood, making it durable and weather-resistant.
Application instructions: Before you begin applying the oil, the surface must be properly prepared. It should be untreated, clean, free from grease and absorbent. A test application is recommended and should be applied as thinly as possible. Because thicker layers are more difficult to dry, any excess oil must be removed.
Surface / Cleaning / Application: The surface must be untreated, clean, free from grease and absorbent. Do not apply at temperatures below 10°C.
The piece of furniture should be sanded with 120-grit and then 180-grit sandpaper. A test application is recommended. The wood oil is applied thinly with a clean cloth, brush or rag. Avoid excess oil or remove it after approx. 30 min. with lint-free cloths until the surface has a uniform appearance. The oil should not form a thick layer, but penetrate and coat the pores. Excess oil appears as wet-looking patches and puddles. If not removed, excess oil may not dry through, remain sticky and cause uneven shine. Do not paint over these areas; instead, remove them with a pulling blade, cleaning pad or mild 5% caustic soda solution and re-treat if necessary. Then sand the wood again with 280-grit sandpaper, dust it off and apply another thin coat of furniture oil.
Risk of spontaneous combustion: In very fine dispersion in contact with air, there may be a risk of spontaneous combustion! Oil-soaked cloths should therefore only be stored in closed metal containers. Oil-soaked cloths can be disposed of safely if they can be spread out and allowed to dry in the air.
Technical specifications
| Property | Value |
|---|---|
| Area of use | Interior & exterior |
| Consumption | approx. 10 m²/L per coat |
| Application | Brushing, painting |
| Drying time | Recoatable after approx. 24 h |
| Wood types | Teak, eucalyptus, bangkirai, larch, oak, cedar and more |
| Suitable for | Furniture, garden furniture, wooden floors, carving, wooden boats and more |
| Properties | Vapour-permeable, dirt- and water-repellent, excellent penetration, brings out the wood grain, gives light woods a warm honey tone, does not crack, very economical, can be touched up locally if damaged |
Recommended Layering
Areas of application
Frequently Asked Questions
Customers also bought
-
Wood cleanerBE-415 Wood Grey Remover and Cleaner€14,90 €24,90 -
Green algae removerBE-860 Green Algae Remover, Moss Remover, Algae Cleaner€39,90 €49,90 -
Varnish removerLS-719 Paint Stripper€34,90 €44,90 -
Paint roller setBE-40W Paint Roller Set with Paint Tray for Wood Stains, Glazes, Oils€5,90 -
Painter's fleeceBE-23W Painter's Fleece Drop Cloth 25m€17,90 €27,90 -
Painter's telescopic poleBE-77W Telescopic Pole for Paint Roller€11,90 €21,90


















