BE-205 Teak Oil for Indoor and Outdoor Use

Solvent-free, weather-resistant and dirt-repellent: Teak and Bangkirai oil in a satin to semi-gloss finish for indoor and outdoor use. Nourishes and protects valuable teak woods and refreshes the natural teak color. Durable in finish, it provides protection against the elements. Refreshes and nourishes, accentuates the wood grain, and gives a honey-toned appearance. The teak oil is also suitable as a hardwood oil. Penetrates deeply while allowing the wood to remain breathable. Plasticizer-free and also suitable for living spaces.

Application area: For old (not varnished, stained, sealed or impregnated) and new Bangkirai wood, such as garden furniture, privacy screens, wooden decks, garden parquet, wooden garden flooring, fences, pergolas, etc. For natural and high-quality hardwood surfaces: teak, Bangkirai, eucalyptus, robinia, rosewood, mahogany, meranti, iroko and many more.

Quality that convinces

- Ideal care product for garden wood made of Bangkirai wood
- Solvent-free wood protection
- Penetrates deeply
- Dries completely on the surface
- After drying, odorless, water- and dirt-repellent, and resistant to foot traffic
- Refreshes old, grayed, dull wood surfaces
- Revitalizes the natural wood grain
- Produces an even, silky finish
- Easy to apply
- Provides protection against UV rays and thus against premature graying of the wood

Protecting new wood floors: New wooden stairs, furniture, floorboards and parquet floors, doors and almost all other items made of a wide variety of woods are protected from moisture and dirt by the Bekateq BE-205 teak oil. The wood oil is applied to the dry, clean and grease-free surface, penetrates into the wood and forms a tough, flexible, dirt- and water-repellent protective film.

Restoring old wood to its former beauty: Previously firnished, old and worn wooden floors, wooden stairs, furniture and doors regain their natural beauty, pleasant surface and protection with the Bekateq linseed oil firniss. First, the wood is prepared: dirt, wax and grease residues are carefully removed, and damaged areas repaired. Then the Bekateq BE-205 teak oil is applied, and the wood is now perfectly dirt- and water-repellent again.

Substrate / Cleaning / Application: Free the wood from coarse dirt by brushing, then clean (e.g. with soapy water), rinse with clear water, then allow the wood to dry completely (approx. 2-3 days). After drying, lightly sand with sandpaper or sanding fleece if necessary (wear a dust mask). Excess oil appears as wet-look spots and puddles. Excess that is not removed may not dry through, remains sticky and leads to differences in gloss. Do not paint over these spots, but remove them with a pulling blade, cleaning pad or mild 5% soda lye and re-treat if necessary.

Spontaneous combustion hazard: In very fine dispersion in contact with air, there may be a risk of spontaneous combustion! Oil-soaked rags may therefore only be stored in closed metal buckets. Oil-soaked rags can be disposed of without danger if the rags can be spread out to dry in the air.