BK-190EP 2K Epoxy Primer, Adhesion Promoter, Bonding Primer
Free shipping within Germany
Free returns
Description
2K epoxy resin primer improves adhesion to concrete, screed, tiles, wood, OSB, and metal. Priming and strengthening of concrete and screed surfaces, as well as moisture sealing. Also suitable for filling cracks and construction joints in screed and concrete. By adding fillers, it is possible to produce epoxy resin mortar for industrial and residential applications. Suitable for indoor and outdoor use. This primer serves for substrate preparation and deep strengthening. The residual moisture should not exceed 3-5%.
Suitable for: workshops, industrial halls, living spaces, offices, basements, stairs, and much more. The epoxy primer is particularly recommended if heavy loads from pallet trucks or forklifts are expected.
For old coatings and/or older, sanding floors, sand the substrate thoroughly. For untreated screed or concrete, it is sufficient to clean the floor thoroughly (remove oil residues/grease, etc.). The 2K epoxy resin primer is resistant to water, seawater, and wastewater in its cured state, as well as numerous alkalis, diluted acids, salt solutions, mineral oils, lubricants and fuels, and many solvents.
Versatile applications
- Floor primer and sealing
- Repair resin
- Casting resin
- For the production of epoxy resin mortar
- Sealing photo wallpapers, and much more.
Quality that convinces
- Chemical-resistant and solvent-resistant
- Plasticizer-resistant and mechanically durable
- For concrete, screed, cement, wood, tiles, metal
- Highly load-bearing and impact-resistant
- Creates a suction-even surface and seals the substrate
- Application using a short-pile paint roller
- Can be disposed of with household waste (in its cured state)
Technical data
- Walkable/Overpaintable: after approx. 10-12 hours
- Working time: approx. 30 min at 20°C
- Fully load-bearing: after 5-7 days at 20°C
- Consumption: approx. 300 g/m² per coat
- Minimum curing substrate temperature: 6-10°C
- Max. working substrate temperature: 35°C
Recommended additional products
- BEKATEQ BE-702 2K epoxy resin floor coating
- BEKATEQ BK-400EP 2K epoxy resin floor sealer, colorless
- BEKATEQ BK-110 fine filler
- BEKATEQ BK-150EP epoxy resin mortar
Technical specifications
| Property | Value |
|---|---|
| Properties | Solvent-free, low odour, cold-resistant, heat-resistant, UV-optimised, self-venting, self-levelling, plasticiser-free, chemical-resistant, weatherproof, fast-drying, frost-resistant, tyre-resistant, 2-component |
| Application | Roller, brush, pouring |
| Substrate | Concrete, tiles, screed, wood, stone, metal |
| Colour | Transparent |
| Gloss level | Satin gloss |
| Dust-dry | approx. 6-8 h |
| Recoatable after | approx. 10-12 h |
| Field of application | Indoors & outdoors |
| Application method | Pouring; brush; roller |
| Suitable for | Garage floors, floor tiles, cellars, stairs, living spaces, warehouses and production halls, wooden floors, balconies & terraces |
| Coverage | approx. 5 m²/kg per coat |
| Area of use | Indoors & outdoors |
Recommended Layering
Areas of application
Frequently Asked Questions
Customers also bought
-
Floor coatingBE-702 2K Colored Epoxy Resin Flooring Coating€174,90 €199,90 -
Floor cleanerBE-800 Floor Cleaner Concrete Cleaner Workshop Cleaner€17,90 €27,90 -
Short-pile paint rollersBE-79W Short-Pile Paint Roller for Floor Coating€22,90 -
Painter's fleeceBE-23W Painter's Fleece Drop Cloth 25m€17,90 €27,90 -
BE-18W Stirring Rod for Epoxy Resin, Paints, Varnishes€11,90 €21,90 -
Nail rollerBE-76W Nail Banding Vent Roller with Handle€17,90 €25,54
