BK-250EP 2K electrical potting compound colored casting resin

High-quality 2K epoxy-based potting compound. The electrical potting compound has been extensively tested up to 1000V voltage. It can be used to pot and protect junction boxes, junction sleeves, junction enclosures, cable sleeves, and much more against dirt, water, moisture, dust, and other influences. Also suitable for insulating and potting circuit boards in enclosures.

Also suitable for refilling after changes or repairs. This extends the service life of electronic devices and makes them resistant to environmental influences. It also protects damaged cable sections.

Scope of delivery: For 2-component systems, the total weight consists of component A and component B. You receive the base component + hardener.

Mixing ratio: 10 parts component A : 6 parts component B

Do not pour more than 1cm at a time. When mixing partial quantities, always use a scale to weigh out the exact mixing ratio by weight.

Product advantages of the 2K electronics potting compound

- No triggering of a residual current circuit breaker due to moisture in junction boxes
- IP68 after curing
- Tested for 1000V voltage resistance
- Mechanically impact-resistant
- Insulates and protects against environmental influences

Application of the electronics potting compound: Mix components A and B with a mixer at moderate speed (450 rpm). Make sure not to incorporate too much air. Stir for 2 minutes, wipe down the container walls, transfer to another container, and stir for another minute. Let the mixture stand for a while so that it de-aerates itself. Now use the material for potting.

Processing time

- Final strength after 12h curing: solid (IP68)
- Processing temperature: 10° to 30°
- Insulation resistance at 1000V after potting: > 4.7 MOhm
- Insulation resistance at 1000V after curing: > 9999 MOhm

Consumption example: To completely pot an empty 80x80mm junction box, approx. 300g of electrical potting compound is required!