BE-291 Douglas Fir Oil for Interior and Exterior Use
Free shipping within Germany
Free returns
Description
The Douglas Fir Oil by is a silk-matte, deeply penetrating and breathable care oil that serves to protect Douglas fir wood and other hardwoods. For refreshing indoors and outdoors. The high-quality wood oil is suitable for, e.g., garden parquet, wooden decks, grooved wood flooring, fences, privacy screens, pergolas, garden wooden floors, grooved boards, etc. It emphasizes the natural grain and has a protective and caring effect. In addition, the Douglas fir oil prevents drying out, cracking and greying, is weather-resistant and increases water repellency. In addition to its protection, the Douglas fir oil also offers easy application.
Application: The substrate must be clean, grease-free and absorbent. Test application recommended. The garden furniture oil is applied thinly with a brush. Excess should be avoided or removed after approx. 30 min. with lint-free cloths until the surface offers a uniform silk-matte appearance. The wood oil should not form a layer on the wood, but penetrate into the wood and coat the pores.
Drying times
- Reworkable after approx. 24 hrs at 20°C
- Final hardness after approx. 1 week, treat gently during this time
Care: Oiled surfaces with light soiling clean with lukewarm water without additives. Do not use hot water and degreasing or abrasive cleaners.
Quality that convinces
- Solvent-free wood protection
- Weather protection & care
- Water- and dirt-repellent
- Color-refreshing, has a honey-toned effect
- Diffusion-open and breathable
- Does not crack & peel
- Easy application, excellent finish
Protect wood: Douglas fir wood paneling is perfectly protected from moisture and dirt by the Bekateq BE-291 Douglas Fir Oil. The wood oil is applied to the dry, clean and grease-free surface, penetrates into the wood and has a color-refreshing effect.
Technical data
- Silk-matte surface
- 1L sufficient for approx. 10sqm, depending on absorbency
- With roller, brush or lint-free cloth
- Application not below 10°C
Old wood beautiful again: Old and worn wooden floors, wooden stairs, furniture and doors get their natural beauty, their pleasant surface and their protection back through the Bekateq Douglas Fir Oil. Before that, the wood is prepared: dirt, wax and grease residues are carefully removed, and damaged areas repaired. After that, the Bekateq BE-291 Douglas Fir Oil is applied.
Technical specifications
| Property | Value |
|---|---|
| Area of use | Interior & exterior |
| Consumption | approx. 10 m²/l per coat |
| Application | Cloth, brush |
| Drying time | Recoatable after approx. 24 h |
| Substrate | Wooden floors, wooden stairs, wooden furniture, wooden doors, wooden worktops, wooden wall cladding, wooden beams, natural stone, cork and more |
| Suitable for | Garden parquet, wooden decking, grooved floorboards, fences, privacy screens, pergolas, garden wood flooring and more |
| Properties | Breathable, dirt- and water-repellent, excellent penetration, enhances the wood grain, gives light woods a warm honey tone, does not crack, very economical, can be touched up locally if damaged |
Recommended Layering
Areas of application
Frequently Asked Questions
Customers also bought
-
Wood cleanerBE-415 Wood Grey Remover and Cleaner€14,90 €24,90 -
Green algae removerBE-860 Green Algae Remover, Moss Remover, Algae Cleaner€39,90 €49,90 -
Varnish removerLS-719 Paint Stripper€34,90 €44,90 -
Paint roller setBE-40W Paint Roller Set with Paint Tray for Wood Stains, Glazes, Oils€5,90 -
Painter's fleeceBE-23W Painter's Fleece Drop Cloth 25m€17,90 €27,90 -
Painter's telescopic poleBE-77W Telescopic Pole for Paint Roller€11,90 €21,90
