D.50W 2-in-1 Ready-Mixed Filler for Super-Smooth Surfaces
Free shipping within Germany
Free returns
Description
2-in-1 finishing filler
One-component finishing filler in a beautiful white. Creates super-smooth surfaces on interior walls and ceilings. Dries quickly. The fine filler is also suitable for rooms with increased humidity. The filler can be applied by hand or machine.
Product data
- Wet application possible
- Suitable for rooms with increased humidity
- Highly flexible
- Water-resistant
- Easy to sand
- High adhesion
- Fast-drying
- Solvent-free
- Crack-resistant
- Easy to apply
Technical data
- Color shade: white
- Quality levels: Q1 to Q4
- Application: filler
- Material consumption: approx. 1 kg/m² per 1 mm layer thickness, depending on the type of substrate
- Drying time: approx. 6 hours (1 mm layer thickness)
- Application temperature: from +5°C to +25°C
- Shelf life: approx. 12 months
- Tool cleaning: with water
Interesting additional products
- BEKATEQ BE-518 deep primer for absorbent substrates
- BEKATEQ BK-180 whitish bonding primer for smooth substrates
- BEKATEQ BK-155 quartz primer ideal for smooth substrates but also for subsequent filler work
- BEKATEQ BK-165 concrete bonding primer ideal for smooth substrates but also for subsequent filler work
- BEKATEQ BK-110EP 2K epoxy fine filler for walls and especially floor surfaces
- DICHTON D.30W liquid membrane for wall & floor surfaces
Suitable for non-absorbent but also for absorbent substrates indoors. The product can be used on concrete, screed, aerated concrete, plaster, and cement plaster, gypsum and gypsum fiberboard, wood, paper, lacquered/painted surfaces.
Application: The filler is sprayed or applied evenly with a smoothing trowel. A maximum layer thickness of 2 mm can be applied in one operation. The finishing filler can also be sprayed with suitable airless equipment (if necessary, the finishing filler can be diluted with a maximum of 5% water). After the previous coat has dried, apply another coat if necessary. Sand the fully dried surface with a sanding screen or sandpaper. Wear safety goggles and a dust mask during sanding. Dust off the sanded surfaces and prime. In wet application (dust-free application), after the initial setting of the filler layer, after about 3 hours, finish with a sponge trowel. If necessary, lightly spray with clean water immediately before working.
Substrate preparation: The substrate should be sufficiently load-bearing and cleaned accordingly, i.e., all layers that can reduce adhesion must be removed. Absorbent substrates made of lime-cement plaster, gypsum plaster, and gypsum fiberboard should
be primed with a suitable BEKATEQ primer (BE-518, BK-155, BK-165, etc.).
Technical specifications
| Property | Value |
|---|---|
| Application | Spraying, filling |
| Application temperature | 5°C to +25°C |
| Consumption | approx. 1 kg/m² per mm of layer thickness |
| Quality levels | Q1 to Q4 |
| Drying time | approx. 6 h per mm of layer thickness |
| Substrate | Concrete, screed, aerated concrete, gypsum and cement plaster, plasterboard and gypsum boards, wood, paper, painted/coated surfaces |
Recommended Layering
Areas of application
Frequently Asked Questions
Customers also bought
-
PrimerBK-165 Concrete Contact Adhesive, Bonding Agent for Interior and Exterior Use€39,90 €49,90 -
PrimerBK-155 Quartz Primer, Bonding Primer for Interior and Exterior Use€14,90 €24,90 -
Wall paintsD.70W interior wall paint in white or a color of your choice€20,90 -
Smoothing trowelBE-60W Smoothing Trowel 27x30cm made of sheet steel with wooden handle€9,90 €16,90 -
BE-18W Stirring Rod for Epoxy Resin, Paints, Varnishes€11,90 €21,90 -
Painter's fleeceBE-23W Painter's Fleece Drop Cloth 25m€17,90 €27,90
