D.81W Styrofoam & Mounting Adhesive for Wall & Ceiling
Free shipping within Germany
Free returns
Description
Styrofoam & Mounting Adhesive - Water-based dispersion adhesive for wall and ceiling panels, decorative elements, insulation panels, and the installation of Styrofoam finishing strips and under-wallpaper layers. The product is used to fix polystyrene cladding elements to concrete, stone, or wood.
Product Data
For walls and ceilings
High initial adhesion and bonding strength
Strong & flexible bonding strength
Easy to apply
Versatile use
High coverage
Damp-room resistant & frost-resistant
Ready to use
Solvent-free, odorless & plasticizer-free
Paintable & sandable
Other Adhesives
D.80W Floor Adhesive
D.83W Glue Instead of Drilling (Cartridge)
D.35W PU Joint Sealant (Cartridge)
D.84W Mounting and Skirting Board Adhesive (Cartridge)
Technical Data
Type: Repair & Special Adhesive
Shade: Beige
Application Area: Interior
Color: White
Consumption: approx. 1.50 kg/m²/mm
Working Time: approx. 30 minutes
Correction Time: within approx. 10 minutes
Total Curing Time: 48 - 72 hours
Fire Behavior: E (WFT)
Directions for Use
The STYROFOAM ADHESIVE should be applied in a thin layer of 2-4 mm using a notched trowel or a spatula. Once the adhesive has been applied to the panels or the substrate, move them slightly and press them against the substrate until the excess adhesive flows out. Remove excess adhesive immediately. Mix only as much material at a time as the working time allows, so that this time is not exceeded.
Substrate Preparation
The substrate must not be cracked. It should be dry, clean, free from dust, grease, old paint, and small elements that could weaken the adhesion of the adhesive. All dusty substrates made of gypsum-containing materials should be sanded and dusted. Chipboard and OSB panels should be sanded, vacuumed, washed, and primed.
The work should be carried out at a substrate and ambient temperature of +5°C to +25°C. The work should not be carried out in rain, excessive sunlight, or strong wind. Technical data and application information apply to a temperature of 25°C ± 2°C and a relative humidity of 55-60%. Drying and curing times may vary under other weather conditions.
Technical specifications
| Property | Value |
|---|---|
| Area of use | Indoor |
| Pot life | approx. 30 minutes at 20°C |
| Total setting time | 48 - 72 h |
| Application | Clean the joints, pre-wet, mix quartz sand with the binder, pour out in spots and spread |
| Consumption | approx. 1.50 kg/m²/mm |
| Typical use | Wall and ceiling panels, decorative elements, insulation boards, fitting of polystyrene skirting and finishing strips and lining wallpaper. |
| Substrate | Concrete, stone, wood |
| Properties | High initial tack and bond strength, strong & flexible adhesion, easy application, universally usable, high coverage, moisture-resistant & frost-proof, ready to use, solvent-free, odourless & free of plasticisers, paintable & sandable |
| Colour | Beige |
