D.49W Anti-Mold Paint in Matt White or Tintable

Anti-Mold Wall Paint - Special emulsion paint for high-quality fungicidal and bactericidal ceiling and wall coatings on mold-prone and mold-infested surfaces indoors. Especially suitable for rooms at risk due to high humidity, such as kitchens, bathrooms, and many more.

Suitable for: paintable wallpaper and rough-surfaced wallpaper, emulsion paint coatings, polystyrene ceiling panels, plasterboard, plaster, concrete, stone - can be tinted with all commercially available solid and tinting paints.

Product data

- solvent- and plasticizer-free
- water-based
- equipped with fungicides and bactericides
- odorless
- good opacity
- water-vapor permeable
- easy to apply

Technical data

- Color: white -
- can be tinted with all commercially available solid and tinting paints
- Gloss level: matt
- Wet scrub resistance class: 3
- Opacity: 1
- Coverage: approx. 150 - 170ml/sqm on smooth surfaces, determine by test application if necessary
- Storage: store cool but frost-free
- Cleaning of tools: immediately after use with water

Drying at +20°C and 65% RH

- Drying after approx. 4 - 6 hours
- allow for longer drying times at low temperatures and/or higher humidity

Application
Dilute slightly with water if necessary. Application can be done by brushing or rolling. Application temperature + 50 C for air and substrate. Note: To avoid lap marks, apply wet-on-wet in one continuous stroke. For airless spray application, stir the paint well and strain. Flashing of repairs in the surface depends on many factors and is therefore unavoidable.

Substrate / Preparation
Determine and eliminate the cause of the mold infestation. The substrate must be firm, dry, clean, load-bearing, and free from efflorescence, sintered layers, release agents, corrosion-promoting components, or other intermediate layers that interfere with bonding. Check existing coatings for suitability, load-bearing capacity, and adhesion. Thoroughly remove damaged and unsuitable coatings and dispose of them according to regulations. Depending on the substrate, the surface must first be primed.

Use biocidal products carefully. Always read the label and product information before use. Registration number: N-109621