BE-230 Woodworm Protection for Interior and Exterior Use
Free shipping within Germany
Free returns
Description
Wood preservative, solvent- and biocide-free, water-dilutable and highly effective wood protection for the preventive and remedial treatment of wood pests such as woodworm, common house borer and sapwood borer indoors and outdoors. Effective against wood-destroying decay and mold fungi and provides preventive protection against new insect infestations. Suitable for animal and plant wood pests, especially against termite infestation. Suitable for all types of wood and wood-based materials, e.g. stairs, furniture, doors, decorative items. It also has a wood-hardening effect.
Can be overcoated with, e.g.: BE-420 wood preservative paint, LS-422 wood preservative primer, BE-450 nano sealer.
Application: Wood preservative is used for preventive and remedial wood treatment as well as for wood hardening. Suitable for animal and plant wood pests (including termites).
Processing: Can be diluted, but does not have to be. It can be applied by brushing, spraying, dipping, flooding, borate hole and pressure vessel impregnation, and the method must be determined depending on the object. The first coat must be dry before the second coat is applied. In case of woodworm infestation, inject the wood preservative well into the feeding galleries with a syringe. Excessive application or reactions with wood constituents may cause slight whitish or grayish spotting, which can be removed by simply brushing or sanding. Until it is permanently fixed in the wood (approx. 6 weeks), the wood preservative is slightly washable.
Technical Data
- Transparent
- Roller, brush, sprayer
- Diluted or undiluted, 2-3 coats
- Substrate temperature at least +8-10°C to +35°C
Drying Times
- Surface dry after approx. 10-12 hours
- Overcoatable after approx. 24 hours
- At low temperatures and higher humidity, drying times are extended
Attention: Due to the product's alkalinity, woods containing tannic acid, such as oak, etc. may discolor. Therefore, always perform a preliminary test on an inconspicuous area before full-surface application.
Substrate Preparation: The substrate must be dry, clean, sound, free of grease and free of release agents. All old coatings must be completely removed before treatment. Remove wood layers heavily damaged by insects and thoroughly clean the remaining wood parts with a wire brush.
Technical specifications
| Property | Value |
|---|---|
| Properties | Solvent-free, breathable, water-based, low odour, weatherproof, fast-drying |
| Application | Brush, roller, spraying |
| Substrate | Wood |
| Colour | Transparent |
| Gloss level | Satin |
| Dust-dry | approx. 2 h |
| Recoatable after | approx. 4-6 h |
| Application method | brush; roller; spraying |
| Suitable for | Wooden beams, garden sheds, garden furniture, wooden floors, wooden surfaces |
| Coverage | approx. 100 g/m² |
| Area of use | Indoors & outdoors |
Recommended Layering
Areas of application
Frequently Asked Questions
Customers also bought
-
Wood cleanerBE-415 Wood Grey Remover and CleanerCHF 15.00 CHF 24.00 -
Wood preservative primerLS-422 Wood Preservative Primer, Primer for WoodCHF 26.00 CHF 33.00 -
Wood coatingBE-420 Wood Stain for Interior and Exterior UseCHF 90.00 CHF 99.00 -
Paint roller setBE-40W Paint Roller Set with Paint Tray for Wood Stains, Glazes, OilsCHF 6.00 -
PaintbrushBE-59W Brush Set for Paints, VarnishesCHF 4.00 CHF 15.00 -
Painter's telescopic poleBE-77W Telescopic Pole for Paint RollerCHF 12.00 CHF 21.00
