BE-856 Color Enhancer for Artificial and Natural Stones

The BEKATEQ Colour Enhancer for natural and artificial stone indoors and outdoors nourishes and protects open-pored concrete stones, granite, marble, paving stones, and much more. It also serves as a stain protector for kitchens, terraces, bathrooms, and much more. After drying, the BEKATEQ Colour Enhancer forms a clear, dirt-repellent, and vapour-permeable protective layer.

Product Data Colour Enhancer

- Solvent-free
- Suitable for absorbent and open-pored natural and artificial stones
- Forms a tough, flexible, dirt- and water-repellent film
- Easy to apply with excellent flow
- Can be overcoated with any varnish
- Suitable for indoor and outdoor use
- Colour enhancer with a wet-look effect
- Coverage: 1 l covers approx. 10-12 m², depending on the substrate and its absorbency

Application: The substrate must be untreated, clean, free from grease, and absorbent. Application should not take place at temperatures below 10°C. A test application is recommended. The colour enhancer is applied thinly with a roller, brush, or cloth. Excess should be avoided or removed after approx. 30 min. with lint-free cloths until the surface has a uniform satin finish. The colour enhancer should not form a layer, but rather penetrate the substrate and coat the pores.

Drying time: Fully cured after approx. 4 weeks; handle gently during this time.
Care: Clean oiled surfaces with hand-warm water without additives in case of light soiling. Do not use hot water or degreasing or abrasive cleaners.

Application instructions

- The substrate must be untreated, clean, free from grease, and absorbent
- Do not apply at temperatures below 10°C
- Apply thinly with a roller, brush, or cloth