LS-410 2K Tile and Bathtub Coating

2K PU Tile and Bathtub Coating in RAL colors, glossy. Does your bathtub or shower tray no longer look good or has it simply become rough and worn out, and you want to renew it? The same applies to wall and floor tiles? However, you want to avoid replacing it with a new tub or ripping out the old tiles? Then our tile and bathtub coating is just right for you. High-quality 2K tile and bathtub paint in glossy, makes your bathtub or shower tray look like new. After painting, it is almost as resistant as the original.

The 2K PU paint is ideally suited as a wall and floor tile paint. Upon request, you will receive many more RAL colors. Suitable for ceramic, enamel, acrylic bathtubs, porcelain, steel, tiles, plastic, as well as GRP - for both indoor and outdoor use.

The following procedure is recommended:

- Bathtub must be clean, grease- and lime-free
- It is best to remove the silicone joints at the edge. After painting, new and clean silicone can be injected.
- Tape off fixtures and edges.
- Best to paint the surface twice.

Quality that convinces

- Made in Germany
- Extremely resistant
- Excellent water resistance
- Application with roller, brush or spray gun
- Bathtub coating without construction, without dirt, without noise
- Impact-resistant & abrasion-resistant
- Acid-, alkali- and chemical-resistant
- Fast drying
- Good filling and leveling

Technical data

- Application temperature: min. 10°C
- Application time approx. 2-3 hours, at 20°C
- Mixing ratio: 5:1 (A : B)
- Repaintable: after 12 hours
- Fillable: after 5-7 days
- Dust dry: after approx. 2 hours
- Full curing: after approx. 7 days, at 20°C
- Consumption: 2.5kg for approx. 2 bathtubs and 2 shower trays, 2x painting
- The product is water-resistant after full curing
- Gloss level: satin finish

Matching additional products

- Primer: LS-350 2K PU primer in white
- Sealing: LS-735 2K PU sealer in colorless