BE-290 Clinker Oil for Terracotta, Clay, Brick
Shipping cost: 4,95€ within Germany
Free returns
Description
Clinker oil for clinker and ceramic nourishes and protects porous stone surfaces, enhances their color, and protects against dirt and stains. The care oil is suitable for brick tiles, clay and clinker slabs, clinker paving, interior and exterior clinker facades, and much more.
The natural stone oil is extremely economical, breathable, penetrates deeply, and is solvent-free. In addition, the BEKATEQ BE-290 care oil is low-odor and solvent-free.
Product data
- Clinker and ceramic stone care product, color-enhancing oil
- Nourishes and protects porous stone surfaces
- Enhances color and protects against dirt and stains
- Extremely economical, breathable, penetrates deeply
Your benefits
- Care oil also serves as a stone impregnator for open-pored stone surfaces
- Low-odor and solvent-free
Recommended additional products
- BEKATEQ BE-840, stone sealer - Impregnates and protects natural stone indoors and outdoors
- BEKATEQ BK-400EP, 2K epoxy resin sealer - Transparent, glossy, and durable floor sealer for indoors and outdoors
Substrate / Cleaning / Application: The substrate must be untreated, clean, grease-free, and porous. Do not apply at temperatures below 10°C. A test application is recommended. Apply the natural stone oil thinly with a brush or cloth. Avoid excess application or remove any excess after approx. 30 min. with lint-free cloths until the surface has a uniform appearance. The oil should not form a thick layer, but rather penetrate and coat the pores. Excess application appears as wet-looking glossy patches and puddles. If not removed, excess may not dry through, remain sticky, and lead to differences in gloss. Do not paint over these areas, but remove them with a pulling blade, cleaning pad, or mild 5% soda lye, and re-treat if necessary.
Risk of spontaneous combustion: In very fine dispersion in contact with air, there may be a risk of spontaneous combustion! Oil-soaked cloths may therefore only be stored in closed metal buckets. Oil-soaked cloths can be disposed of without danger if the cloths can be spread out to dry in the air.
Technical specifications
| Property | Value |
|---|---|
| Area of use | Interior & exterior |
| Consumption | approx. 10 m²/L per coat |
| Application | Brushing |
| Drying time | Recoatable after approx. 24 h |
| Suitable for | Natural stone, artificial stone, clinker, ceramics, brick tiles, clay tiles, clinker slabs, clinker paving, clinker facades and more |
| Properties | Vapour-permeable, dirt- and water-repellent, excellent penetration, enriches the colour of the substrate, gives light surfaces a warm honey tone, does not crack, very economical, can be touched up locally if damaged |
Recommended Layering
Areas of application
Frequently Asked Questions
Customers also bought
-
Rust Stain RemoverLS-565 Rust Stain Remover for Stone & ConcreteCHF 5.00 CHF 19.00 -
Green algae removerBE-860 Green Algae Remover, Moss Remover, Algae CleanerCHF 38.00 CHF 48.00 -
Varnish removerLS-719 Paint StripperCHF 33.00 CHF 43.00 -
Paint roller setBE-40W Paint Roller Set with Paint Tray for Wood Stains, Glazes, OilsCHF 6.00 -
Painter's telescopic poleBE-77W Telescopic Pole for Paint RollerCHF 12.00 CHF 21.00
