BE-855 Slate Oil Natural Stone Oil color-enhancing

The solvent-free stone oil from the BEKATEQ brand prevents moisture and dirt from penetrating. Due to the filled pores, the surface appears rich in color and is also water-repellent. For regular stone care, the stone oil penetrates deep and nourishes the stone surface from within. The natural colors are preserved, highlighting the color structure of the natural stone floor.

In addition, the natural stone oil offers protection against alcohol, fruit juices, oil, and similar contaminants. It is also suitable for covering existing stains and for the initial treatment of new surfaces. The stone care product is suitable for all natural and artificial stones, as well as other open-pored stone floors, such as slate, granite, or exposed aggregate concrete.

Quality that convinces

- Easy to apply
- Durable
- Penetrates deeply and fills the pores
- Dirt- and water-repellent
- Suitable for indoor and outdoor use
- Surface can continue to be cleaned
- No solvents, aromatics, drying agents, or preservatives
- Consumption: per coat, depending on absorbency, approx. 0.1-0.2 L of stone oil per m²

Protecting new stone floors: New natural and artificial stone floors such as slate, marble, granite, concrete, and almost all other items made of various open-pored stone types are protected from moisture and dirt by the Bekateq BE-855 stone oil. The natural stone oil is applied to the dry, clean, and grease-free surface, penetrates into the stone, and forms an elastic, dirt- and water-repellent protective film.

Old natural stone like new: Previously varnished, old, and worn stone floors regain their natural beauty, their pleasant surface, and their protection through the Bekateq stone oil. First, the open-pored stone surface is prepared: dirt, wax, and grease residues are carefully removed, and damaged areas are repaired. After that, the Bekateq BE-855 stone oil is applied, and the substrate is now perfectly dirt- and water-repellent again.

Substrate / Cleaning / Application: The substrate must be untreated, clean, grease-free, and absorbent. Do not apply below 10°C. A test application is recommended. Natural stone oil is applied thinly with a brush/cloth. Excess should be avoided or removed after approx. 30 min. with lint-free cloths until the surface offers a uniform appearance. The oil should not form a thick layer, but penetrate and coat the pores. Excess appears as wet-looking shiny spots and puddles. Excess that is not removed may not dry through, remains sticky, and leads to differences in gloss. Do not paint over these spots, but remove them with a pulling blade, cleaning pad, or mild 5% soda lye and re-treat if necessary.

Spontaneous combustion hazard: In very fine dispersion in contact with air, there may be a risk of spontaneous combustion! Oil-soaked cloths may therefore only be stored in closed metal buckets. Oil-soaked cloths can be disposed of without danger if the cloths can be spread out to dry in the air.