BE-840 Stone Sealer for Interior and Exterior Use

The Bekateq BE-840 stone sealer forms a water- and dirt-repellent, breathable protective layer. The sealer also has a color-deepening effect and dries with a low-gloss finish. In addition, a practical and visible beading effect is created: water, dirt, oil or grease can no longer penetrate the surface. This makes stone surfaces considerably easier to care for, and your natural stone can be wiped down noticeably more easily. Bekateq BE-840 stone care can be used on many stone surfaces indoors and outdoors: natural stone walls, stone cladding and stone floors, marble or granite bathrooms, patios, even tombstones, tile joints and much more can be perfectly protected.

The product is ideal for all porous natural and artificial stones such as: slate, marble, sandstone, polygonal slabs, terrazzo, Solnhofen limestone slabs, washed concrete, granite, clinker, unglazed porcelain stoneware, etc.

Application: The stone protection is applied with a brush, paint brush, paint roller or sprayer. To achieve the best results, it is advisable to apply it undiluted. However, it is possible to dilute the product by up to 10% with cold tap water before application. The application rate should be between 100 and 250 g/m2, depending on the condition of the substrate. To achieve thicker layers, the product must be applied wet-on-wet. If you wish to remove the protective layer, you can do so using a cleaning agent in combination with hot water (approx. 90°C) from a professional pressure washer.

Quality that convinces

- Easy to apply
- Colorless, dries with a low-gloss finish
- Enhances the color and texture of stone surfaces
- Solvent-free
- Dirt- and water-repellent
- Suitable for indoor and outdoor use
- Protects against premature moss and algae growth
- High yield: 1 liter is sufficient for approx. 10 m2 on the first application

Protection from the start: New stone surfaces are perfectly protected by a single, thin coat of Bekateq stone sealer. The product is applied to the clean, grease-free and completely dry (!) stone surface, and any excess material is removed with a cloth. After complete curing, the treated stone surfaces are easy to care for, as well as dirt- and water-repellent.

Restore the beauty of old stone: Old stone floors and other stone surfaces regain their former beauty with Bekateq stone sealer. First, the surfaces to be treated are cleaned and freed from any care product residues, grease stains and limescale marks. Then, just like with new stone surfaces, a coat is applied that gives the beautiful old material a new silky luster and protects it for a long time against new dirt and water stains.

Drying time: After approx. 12 to 24 hours, an initial water-repellent effect should be noticeable. After another 3-4 days, the water repellency should be fully developed. The time it takes for the product to develop an effect also depends on other factors, such as the condition of the surface, its alkalinity, moisture, and temperature. On non-porous surfaces or chemically pre-treated substrates, the sealer may not show any effect. We therefore recommend conducting preliminary tests on small test areas before any large-scale application on unfamiliar surfaces.