BE-713 Tile Paint for Wall Tiles in Satin Finish

The high-quality 1-component BEKATEQ tile paint, available in a silk-matte finish, is suitable for wall and floor tiles indoors and outdoors. The tile paint is formulated to drip less, emit low odor, and be highly durable. The paint has very high opacity, excellent adhesion, and is easy to apply. It is also fast-drying and has excellent leveling properties. The BEKATEQ BE-713 tile paint has excellent yellowing resistance and provides reliable edge coverage thanks to its high-quality pigments.

Our tile paint is a cost-effective alternative: renovating bathrooms made easy. Save yourself a lot of time and effort. Instead of laboriously removing old tiles, simply paint over them. You can choose from a variety of colors, allowing you to paint your tiles instead of renovating.

Application: If necessary, dilute the tile paint with 10% water and then apply by roller, brush, or spray. 1 l is sufficient for approx. 5–7 m². After a drying time of approx. 4–6 hours, the surface can be painted again. Full curing occurs after approx. 7 days.

Surface preparation: for smooth surfaces, we recommend cleaning them and then priming them with the BK-180 special primer for smooth surfaces before applying the BE-715. This should be followed by 1–2 full coats of undiluted tile paint.

Additional products

- Thinner: water
- Surface preparation: BE-715 stain remover and degreaser
- Primer: BK-180 special primer highly recommended
- Tile paint for floors: BK-721F 2K epoxy-based tile coating

Product data

- 1K tile paint for indoor and outdoor use
- Excellent adhesion and fast-drying
- Highly opaque and filling
- Flexible surface
- Impact-resistant and shock-resistant
- High coverage
- Formulated to drip less

Technical data

- Characteristics: water-based coating material
- Gloss level: silk-matte
- Application: roller, brush, or spray
- Coverage: approx. 5–7 m² / l
- Application temperatures / humidity: +5°C to +35°C / max. 75% humidity
- Dilution: 10% water
- Dust-dry: after approx. 3 hours
- Repaintable: after approx. 4–6 hours
- Fully cured: after approx. 5–7 days

Coating build-up: The surface must be open-pored and absorbent. Smooth surfaces must be roughened/sanded beforehand. Please also note that when coating dark surfaces/old paintwork with light colors, an increased number of coats may be required. This is not product-specific, but naturally applies to paint products from all manufacturers.

Step-by-step tile painting

The application and, above all, the drying of the tile paint should not take place at temperatures below 10°C. This specification refers to the paint material, surface, and room temperature during application and the subsequent drying and curing time.

1. Remove dust sources
2. Sand the surface before use. It must also be clean, dry, and free of grease, silicone, and wax. Remove loose old paint or rust beforehand. Important: Do not use soap-based cleaners or scouring milk. Use BEKATEQ BE-715 as a stain remover/degreaser. We recommend the BK-180 special primer as an undercoat.
3. Check whether a primer is required. As a primer/first coat, you can apply the tile paint diluted with approx. 10% water.
4. Spray, roll, or brush on the paint. 1–2 coats are recommended.
5. The paint is dust-dry after 4–6 hours. The product can then also be painted over.

Attention: When using multiple containers, ensure batch consistency and check the color shade before application, e.g. by applying a sample. The final coat must come from the last/same delivery. When combining with other/third-party products, check material compatibility beforehand.