BE-702 2K Colored Epoxy Resin Flooring Coating
Free shipping within Germany
Free returns
Description
2K epoxy resin floor coating in a semi-gloss finish for indoor and outdoor use. Epoxy coating with fast curing, high chemical resistance and high load-bearing capacity. The BE-702 2K epoxy resin floor paint is suitable for industrial and private purposes. Thanks to the 2K epoxy-based floor coating, you get a seamless epoxy floor covering that is plasticizer-free and plasticizer-resistant, and can therefore be driven over by vehicles, forklifts and pallet trucks.
The colored 2K floor sealant is resistant to water, solvents, chemicals, plasticizers and much more once fully cured.
Suitable for: garages, cellars, workshops, carports, warehouses or production halls, passenger and car lifts, etc. Can also be used for the structural resin bonding of cracks, joints and defects.
Scope of delivery & application: 1. Mix the color paste / 2. add to the epoxy resin and stir thoroughly / 3. add the hardener to the mixture and stir thoroughly again.
Coverage/consumption: Consumption depends on the condition of the substrate (surface condition, absorbency, etc.) and the application method. The material can be applied thinly or very thickly. You should expect at least 200g/sqm per coat. We recommend 2 coats. It is best to calculate with 300g/sqm per coat. If you are planning a light or intense color shade such as red, green, etc., we recommend at least 2 coats with a minimum of 300-350g/sqm per coat.
Additional products
- BK-190EP 2K epoxy resin primer - bonding bridge and sealing primer at the same time
- BK-400EP 2K epoxy resin clear sealant - increases scratch resistance
- BK-110EP fine filler
- BK-150EP epoxy resin mortar
- BK-705 anti-slip agent - for sprinkling into the coating as slip resistance
Cleaning: Keep plenty of paint rollers on hand. Stirrers, needle rollers, roller holders, etc. can be cleaned with nitro thinner.
Thinning: LS-517 nitro thinner with an addition of 3-5%. However, this is only recommended for the first coat. It is not strictly necessary.
Slip resistance: By sprinkling quartz sand or glass beads, the top coating can also be made finely textured. The quantity and grain size affect the slip resistance.
Quality that convinces
- Low odor, UV-stable and self-degassing
- Optimal flow - prevents the formation of possible "fish eyes" or craters/depressions
- For concrete, screed, cement, wood, metal, tiles
- Impact-resistant, abrasion-resistant, highly load-bearing
- Suitable for high pressure loads
- Plasticizer- and chemical-resistant
- Can be driven over by forklifts
- Binds dust, solidifies the surface
- Application with a short-pile paint roller or brush
- Structural resin bonding of cracks, joints and defects
Technical data
- Mixing ratio: 10 parts resin / 6 parts hardener
- Pot life / working time [at 20°C]: approx. 35 min
- Load-bearing/walkable/overpaintable: [at 20°C]: approx. 24 hrs (guideline, temperature-dependent)
- Final strength [at 20°C]: approx. 7 days
- Application temperature: min. 6°-10°C to max. 25°C
- Maximum residual moisture of cement screed substrate: < 2 CM-%
- Coverage as roller coating: approx. 5sqm / kg per working step
Attention: the final color coat must come from the same batch. Otherwise, color variations may occur.
Technical specifications
| Property | Value |
|---|---|
| Properties | High hiding power, solvent-free, UV-optimised, self-degassing, self-levelling, low odour, plasticiser-free, chemical-resistant, tyre-resistant, frost-resistant, weatherproof, 2-component, waterproof |
| Application | Roller, brush, squeegee, trowel |
| Substrate | Concrete, screed, tiles, plastic, metal, wood |
| Colour | Various colours |
| Gloss level | Silk gloss |
| Dust-dry | after approx. 6 h |
| Recoatable after | after approx. 12 h |
| Field of application | Indoor |
| Suitable for | Basement floors/stairs, floor tiles, garage floors, wooden floors, living spaces, storage and production halls |
| Coverage | approx. 5-6 m²/kg per coat |
| Area of use | Indoor |
Recommended Layering
Areas of application
Frequently Asked Questions
Project Calculator
Calculate material quantity and costs for the complete coating system
Customers also bought
-
Floor cleanerBE-800 Floor Cleaner Concrete Cleaner Workshop CleanerCHF 17.00 CHF 27.00 -
Epoxy resin primerBK-190EP 2K Epoxy Primer, Adhesion Promoter, Bonding PrimerCHF 34.00 CHF 48.00 -
Epoxy resin sealerBK-400EP 2K Epoxy Resin SealantCHF 34.00 CHF 47.00 -
Short-pile paint rollersBE-79W Short-Pile Paint Roller for Floor CoatingCHF 22.00 -
Painter's telescopic poleBE-77W Telescopic Pole for Paint RollerCHF 12.00 CHF 21.00 -
Spiked shoesBE-75W Nail Shoes for Floor CoatingsCHF 15.00 CHF 24.00 -
BE-18W Stirring Rod for Epoxy Resin, Paints, VarnishesCHF 12.00 CHF 21.00
