BK-707 Anti-Slip Glass Beads for R9 - R10 Slip Resistance
Free shipping within Germany
Free returns
Description
Glass beads for broadcasting, with a grain size of 0.3–0.5 mm. This achieves a slip resistance of R9 to R10. Ideal for various coating systems, especially in combination with our 2K epoxy resin floor coating for garages, workshops, industrial halls, and much more. So say goodbye to slippery floors. No more unnecessarily exposing anyone to the risk of slipping. The anti-slip material, available in various grain sizes, provides good slip resistance when used with different sealants and coatings. If you want a non-slip surface, you can also use our broadcasting material / quartz sand.
Once the substrate is clean and properly prepared, it should be primed before applying the colored topcoat in the following cases: in areas such as workshops, warehouses & commercial premises where heavy loads from heavily laden pallet trucks, jacks & forklifts are common, and/or if you have older concrete or screed that is highly dusty or absorbent.
In addition to providing good slip resistance, the glass beads create a surface that can be mopped. The glass beads allow the floor to be easily mopped because they are transparent, rounded, and therefore mop-friendly, with only about 1/3 protruding from the surface. This means you can easily mop your garage every day without any problems. The glass beads are sprinkled by hand into the final coat.
Slip resistance / Consumption
- R9 = approx. 50 g/m², to be sprinkled into the clear sealant
- R10 = approx. 60 g/m², to be sprinkled into the clear sealant
Product properties
- Provides R9–R10 slip resistance
- Ideal grain size of 0.3 to 0.5 mm
- Transparent, rounded, and mop-friendly
Additional products
- BK-190EP 2K epoxy primer / adhesion promoter & bonding primer - bonding bridge and for filling absorbent substrates
- BE-702 2K epoxy resin floor coating in RAL colors - fast curing + plasticizer-resistant for industrial and private use-
- BK-400EP 2K epoxy resin sealant, colorless - protective topcoat
- LS-735 2K PU sealant - ideal for outdoor use, as it is UV-resistant
Substrate preparation: We would also like to briefly mention substrate preparation: For any floor coating, whether using the 2K epoxy resin floor coating or another product, substrate preparation is very important. The floor must be rough, solid, dry, and free from grease and oil. Unevenness, cracks, or holes must be removed beforehand.
Technical specifications
| Property | Value |
|---|---|
| Slip resistance | R9 to R10 |
| Use | Scattering by hand |
| Colour | Transparent |
Areas of application
Frequently Asked Questions
Customers also bought
-
Floor coatingBE-702 2K Colored Epoxy Resin Flooring CoatingCHF 165.00 CHF 189.00 -
Epoxy resin primerBK-190EP 2K Epoxy Primer, Adhesion Promoter, Bonding PrimerCHF 34.00 CHF 47.00 -
Floor coatingLS-740 2K PU floor paint for interior and exterior use in glossCHF 41.00 CHF 45.00 -
Epoxy resin sealerBK-400EP 2K Epoxy Resin SealantCHF 34.00 CHF 47.00
