LS-570 Metal Protection Paint 4 in 1

High-quality 4-in-1 metal protection paint based on special synthetic resins for outdoor use. Primer + rust protection paint + intermediate coat + topcoat. The synthetic resin paint can be applied directly to rusted surfaces; remove loose rust beforehand. Metal protection paint with a phosphating agent seals your iron, zinc*, steel, aluminum, or metal parts thanks to active corrosion protection pigments, effectively preventing further rust formation. In addition to rust protection, the metal protection paint serves as a primer for perfect adhesion + intermediate coat for better coverage and a decorative and protective topcoat at the same time.

Universal metal protection paint is ideally suited for many surfaces, e.g., iron, bare and galvanized steel sheets, copper, brass, aluminum, as well as directly on firmly attached residual rust and old paint (e.g., garden fence, gate, railing, garden tools, container, fence, etc.).

Your benefits

- Save yourself the need for various anti-rust products
- Provides long-lasting protection against corrosion
- Fast-drying & very good flow
- High coverage and filling power
- High elasticity
- Impact- and shock-resistant
- Excellent adhesion
- UV-resistant & non-yellowing
- Weather-resistant & waterproof
- Good adhesion properties on many surfaces
- Fast drying and high resistance to sagging
- Can be applied with a brush, roller, or spray gun

Product properties

- Coverage: approx. 5-7 m² / l
- Application temperature: min. 5°C
- Drying: dust-dry after approx. 4 hours, handle-dry after approx. 8 hours
- Curing: full hardness after approx. 5-7 days
- Gloss level: satin finish
- Overcoating: 2 coats, overcoat after 24 hours

Surface preparation

- Ferrous metals: clean, if necessary sand down (remove rust, mill scale, and rolling marks) and degrease

- Aluminum, zinc, and sheet metal must be specially pre-treated. This protective layer must be removed, otherwise adhesion is not possible. For this purpose, use an "ammonia-based surfactant wash" or a suitable primer. Sanding down is necessary in any case

Mix the universal metal protection paint thoroughly before use and apply quickly and thickly undiluted. The paint coating should result in a uniform, continuous layer. Apply twice. Only in this way can long-lasting and reliable rust protection be ensured.

Zinc: Zinc is usually factory-sealed. This protective layer must be removed, otherwise adhesion is not possible. For this purpose, use an "ammonia-based surfactant wash" or a suitable primer. Sanding down is necessary in any case.