BK-610PU Stone Carpet Set for Wall, Base, Stairs
Free shipping within Germany
Description
Stone carpet set for wall surfaces with separating spray for the smoothing trowel, for indoor and outdoor use.
1K PU as binder and primer. Ideal as a wall primer, dries quickly, easy to apply, cures through humidity, UV-resistant. Ideal for stairs, skirting boards and wall surfaces, risers, but also horizontal surfaces. The stone carpet is non-slip and provides a secure walking surface. You receive a complete set for stair treads, wall and skirting surfaces, etc.
AS FOLLOWS: apply the wall primer generously as a primer. Leave the primer to stand for at least 30 min. If the consistency has not changed after 30 min, leave it for another 30 min. The stones are also mixed with the binder; please mix only small quantities of stones at a time. Leave the mixture of stones and binder to stand until the consistency of the primer has thickened or changed. After the appropriate waiting time, the stones are pulled up wet-on-wet.
On smooth surfaces such as stone or tiles, please use joint tape/mesh tape beforehand. In the case of a non-self-adhesive variant, the substrate must be moistened with the 1K PU binder, then the mesh tape pressed on and allowed to dry. Afterwards, prime again with the pasty 1K PU, mix the stones with the same PU, and then pull up wet-on-wet.
Scope of delivery
- 25kg + 3kg PU binder
- 50kg (2 x 25kg) + 6kg PU binder
- 75kg (3 x 25kg) + 9kg PU binder
- 100kg (4 x 25kg) + 12kg PU binder
- 125kg (5 x 25kg) + 15kg PU binder
- 150kg (6 x 25kg) + 18kg PU binder
With each 25kg bag of stones, you achieve approx. 2-2.5sqm with a layer thickness of up to 6mm.
Natural stone carpet set consisting of
- Prime the floor surface with at least 250g/sqm. If the floor is particularly absorbent, prime multiple times
- Mix the natural stones with 1K PU as a binder. Use at least 2.5kg for 25kg of marble gravel. Pull up with a smoothing trowel and then press firmly. If the stones do not hold properly, the proportion can be increased
- Seal the stone carpet with our liquid 1K PU. Apply only thinly. Distribute approx. 200g/sqm here, for example
Your advantages: The 1K PU does not foam and does not form bubbles at high humidity or accidental contact with water. Cures even at low temperatures. Relatively insensitive to moisture during curing.
Stone carpet
- offers a wide range of colors and individual design options
- can be equipped with shapes, such as arrows or walkways for orientation
- Unevenness can be leveled by applying multiple times
Stone carpet application instructions: The pasty 1K PU should not be applied vertically as a final seal for stone carpets. When laying the stone carpet, hollow spaces (nests) should be avoided. If hollow spaces are present in the stone carpet, the pasty 1K PU must be "pressed in" at these places when used as a seal, e.g. with a brush. The 1K PU is formulated as pasty because otherwise the stones cannot adhere properly to vertical surfaces. Always follow our processing instructions.
Tip: Add 10% of the liquid BK-635PU variant as an activator, based on the quantity of the pasty 1K PU binder. By adding it, the mixture (stones + pasty binder) gains significantly higher stability, because the drying of the binder can start more quickly, so the marble gravel adheres better to vertical surfaces.
1K PU - Quality pays off
- Suitable for horizontal and vertical surfaces
- High solid content
- Elastomer, hydrophobic, aliphatic
- Resistant to mechanical, chemical and thermal stress
- Weather and UV resistant
- Heat and cold resistant
- Water vapor permeable
- Silky glossy and colorless after drying
Technical data
- Processing temperature: 6°C
- Walkable/reworkable at 20°C: after 6 hrs.
- Fully cured: after 2-3 days
- Shelf life: unopened, min. 12 months
Marble gravel / Natural stone
- Layer thickness up to 6mm
- Natural marble product
Technical specifications
| Property | Value |
|---|---|
| Application | Wet-on-wet |
| Area of use | Indoor & outdoor |
| Binder content | min. 12-15% |
| Application temperature | 6°C |
| Recoatable after | approx. 6 h at 20°C |
| Properties | Suitable for horizontal and vertical surfaces, high solids content, elastomeric, hydrophobic, aliphatic, resistant to mechanical, chemical and thermal stress, weather and UV resistant, resistant to heat and cold, vapour permeable, silk-gloss and colourless once dry |
| Substrate | Concrete, screed, tiles or similar |
| Gloss level | Glossy |
| Colour | Various |
| Typical use | Stairs, plinths and wall surfaces, risers, horizontal surfaces |
Recommended Layering
Areas of application
Frequently Asked Questions
Customers also bought
-
Smoothing trowelBE-60W Smoothing Trowel 27x30cm made of sheet steel with wooden handleCHF 10.00 CHF 16.00 -
Floor cleanerBE-800 Floor Cleaner Concrete Cleaner Workshop CleanerCHF 17.00 CHF 27.00 -
BE-18W Stirring Rod for Epoxy Resin, Paints, VarnishesCHF 12.00 CHF 21.00 -
Stone Carpet Flooring KitBK-605PU outdoor stone carpet kit with binderCHF 74.00 CHF 93.00
