BEKATEQ Deals 2026 - to the SALE%

BK-150EP Epoxidharzmörtel Reparaturmörtel
Epoxidharz-Anwendung mit Produkteigenschaften.
Hand spachtelt Betonoberfläche mit Kelle.
Farbeimer mit Produkteigenschaften und Logo.
BK-150EP Epoxidharzmörtel Reparaturmörtel
Epoxidharz-Anwendung mit Produkteigenschaften.
Hand spachtelt Betonoberfläche mit Kelle.
Farbeimer mit Produkteigenschaften und Logo.
BEKATEQItem no.: 182864613

BK-150EP Epoxy Resin Mortar Repair Mortar

CHF 23.00incl. VAT, plus shipping (CHF 23.00 /kg)

Free shipping within Germany

Solvent-free Self-venting Self-leveling
Quantity: 1kg
How much do I need?
×
=
×
=
Quantity needed: --
Secure payment Fast shipping 14-day returns
VISA PayPal Klarna Sofort

Description

Epoxy resin mortar as a repair mortar on an epoxy resin basis, ideally suited for spalls, holes, and defects in concrete and screed. Thanks to the high mechanical load capacity of up to 3 t/sqm, the epoxy resin mortar is resistant to pallet trucks and forklifts.

The special properties of the epoxy resin make the mortar resistant to oils, greases, de-icing salts, acids, and alkalis. The epoxy resin mortar is also suitable as a leveling layer on uneven surfaces. The mixed epoxy resin mortar can be poured into defects and flows practically by itself.

In addition to industrial halls, for example, for repairing unevenness, larger holes, and damage, or for leveling, the epoxy mortar also finds its place in the private sector, for example, for repairing cracks in garage screed floors, stairs, or basement floors. It is also suitable for repairing curbs or grouting paving stones. This reliably prevents weed growth.

Scope of delivery: You will receive the epoxy resin, quartz sand, and hardener delivered separately. The resin and hardener are in a separate bottle/container. First, the epoxy resin is mixed with the quartz sand for several minutes using a mixer paddle and cordless drill until a homogeneous mixture has formed. Then the hardener is added and stirred again for several minutes until you also have a homogeneous mixture. The individual components are matched to each other. If you want to mix small quantities, you must measure them out by weight.

Ideally suited as floor preparation for subsequent floor coatings with the BK-190EP primer and then the BE-702 epoxy resin coating!

Recommended additional products

- BK-190EP 2K epoxy resin primer - adhesion promoter and absorption compensation
- BE-702 2K epoxy resin floor coating - 2K colored floor paint
- BK-400EP 2K epoxy resin sealer - 2K colorless floor sealer

Suitable for floor surfaces in:

- Chemical plants
- Car wash halls
- Bathrooms
- Commercial kitchens
- Workshops
- Garages, etc.

For vertical surfaces, we recommend our BK-110EP fine filler.

Properties of BK-150EP 2K epoxy resin mortar

- Frost-resistant and waterproof
- Highly resistant to mechanical loads
- No flaking or cracking
- Easy to apply
- Robust, strong, chemical-resistant, plasticizer-resistant
- Load capacity up to 3 t/sqm
- High stability
- Thin and thick layer thicknesses possible

Technical data

- Color: sand color
- Drying: walkable after approx. 1 day at 20°C
- Mechanical load capacity: after approx. 7 days at 20°C
- Consumption: depending on the application and the size of the repair area
- Application temperature: min. 6-10°C - max. 30°C
- Pot life: approx. 30 min.

Substrate
Surfaces must be free of dust, oil, and grease and / or contain no other adhesion-reducing or loose particles. Add the hardener to the mortar mixture and mix for approx. 2-3 minutes with a mixer paddle, then trowel on with a smoothing trowel.

Cement mortar and epoxy resin mortar compared
Cement mortar is probably the best-known mortar and is therefore also widely used. However, epoxy resin mortar has numerous advantages. The 2-component epoxy resin mortar is waterproof and frost-resistant. In addition, the EP mortar is highly resistant to mechanical loads, with up to 3 t/sqm. Cement mortar would flake off or crumble again in no time under such mechanical loads. Repair areas (e.g., driven-over surfaces) or unevenness can be repaired without any problems. Furthermore, the fully cured epoxy resin mortar is resistant to chemical exposure, de-icing salt solutions, oils, greases, fuels, and a variety of mineral and diluted acids. Epoxy resin mortar is also easy to apply. Synthetic resin mortar is clearly the better choice.

Technical specifications

Property Value
Properties Solvent-free, self-venting, self-levelling, plasticiser-free, waterproof, tyre-resistant, chemical-resistant, frost-resistant, 2-component, fast-drying
Application Filling, pouring
Substrate Concrete, screed, tiles
Colour Beige
Gloss level Silk-gloss
Dust-dry after approx. 6 h
Recoatable after after approx. 12 h
Field of application Indoor & outdoor
Application method pouring; filling
Suitable for Basement floors/stairs, floor tiles, garage floors, wooden floors, living spaces, warehouses and production halls, garage driveways, entrance areas, swimming pools
Coverage approx. 1 kg/m²
Area of use Indoor & outdoor
Download data sheet (PDF)
Safety data sheet (PDF)
Statutory warranty (view notice)
Official EU notice: statutory warranty of at least two years for goods sold in the EU

Recommended Layering

1
Prepare the substrate
The substrate must be load-bearing, clean and dry. Remove loose parts.
2
Mix the filler
Mix the components thoroughly in the specified mixing ratio.
3
Apply the filler
Apply evenly with a smoothing trowel or notched trowel. Observe the pot life.

Areas of application

Basement floor/stairsfloor tilesgarage floorwooden floorliving areawarehouse and production hallgarage entranceentrance areaswimming pool

Frequently Asked Questions

Customers also bought

BK-150EP Epoxidharzmörtel Reparaturmörtel
BEKATEQ

BK-150EP Epoxy Resin Mortar Repair Mortar

From CHF 23.00
CHF 23.00 / kg

Epoxy resin mortar as a repair mortar on an epoxy resin basis, ideally suited for spalls, holes, and defects in concrete and screed. Thanks to the high mechanical load capacity of up to 3 t/sqm, the epoxy resin mortar is resistant to pallet trucks and forklifts.

The special properties of the epoxy resin make the mortar resistant to oils, greases, de-icing salts, acids, and alkalis. The epoxy resin mortar is also suitable as a leveling layer on uneven surfaces. The mixed epoxy resin mortar can be poured into defects and flows practically by itself.

In addition to industrial halls, for example, for repairing unevenness, larger holes, and damage, or for leveling, the epoxy mortar also finds its place in the private sector, for example, for repairing cracks in garage screed floors, stairs, or basement floors. It is also suitable for repairing curbs or grouting paving stones. This reliably prevents weed growth.

Scope of delivery: You will receive the epoxy resin, quartz sand, and hardener delivered separately. The resin and hardener are in a separate bottle/container. First, the epoxy resin is mixed with the quartz sand for several minutes using a mixer paddle and cordless drill until a homogeneous mixture has formed. Then the hardener is added and stirred again for several minutes until you also have a homogeneous mixture. The individual components are matched to each other. If you want to mix small quantities, you must measure them out by weight.

Ideally suited as floor preparation for subsequent floor coatings with the BK-190EP primer and then the BE-702 epoxy resin coating!

Recommended additional products

- BK-190EP 2K epoxy resin primer - adhesion promoter and absorption compensation
- BE-702 2K epoxy resin floor coating - 2K colored floor paint
- BK-400EP 2K epoxy resin sealer - 2K colorless floor sealer

Suitable for floor surfaces in:

- Chemical plants
- Car wash halls
- Bathrooms
- Commercial kitchens
- Workshops
- Garages, etc.

For vertical surfaces, we recommend our BK-110EP fine filler.

Properties of BK-150EP 2K epoxy resin mortar

- Frost-resistant and waterproof
- Highly resistant to mechanical loads
- No flaking or cracking
- Easy to apply
- Robust, strong, chemical-resistant, plasticizer-resistant
- Load capacity up to 3 t/sqm
- High stability
- Thin and thick layer thicknesses possible

Technical data

- Color: sand color
- Drying: walkable after approx. 1 day at 20°C
- Mechanical load capacity: after approx. 7 days at 20°C
- Consumption: depending on the application and the size of the repair area
- Application temperature: min. 6-10°C - max. 30°C
- Pot life: approx. 30 min.

Substrate
Surfaces must be free of dust, oil, and grease and / or contain no other adhesion-reducing or loose particles. Add the hardener to the mortar mixture and mix for approx. 2-3 minutes with a mixer paddle, then trowel on with a smoothing trowel.

Cement mortar and epoxy resin mortar compared
Cement mortar is probably the best-known mortar and is therefore also widely used. However, epoxy resin mortar has numerous advantages. The 2-component epoxy resin mortar is waterproof and frost-resistant. In addition, the EP mortar is highly resistant to mechanical loads, with up to 3 t/sqm. Cement mortar would flake off or crumble again in no time under such mechanical loads. Repair areas (e.g., driven-over surfaces) or unevenness can be repaired without any problems. Furthermore, the fully cured epoxy resin mortar is resistant to chemical exposure, de-icing salt solutions, oils, greases, fuels, and a variety of mineral and diluted acids. Epoxy resin mortar is also easy to apply. Synthetic resin mortar is clearly the better choice.

Quantity

  • 1kg
  • 5kg
  • 10kg
  • 2x 10kg
  • 3x 10kg
  • 4x 10kg
  • 5x 10kg
View product