BK-165 Concrete Contact Adhesive, Bonding Agent for Interior and Exterior Use

Concrete Contact - Extreme grip for subsequent work: facade plaster, tile adhesive, screeds, floor coverings, plaster, paintwork and floor coatings, leveling compounds, etc.

Your benefits

- perfect adhesion to smooth and non-smooth surfaces
- for indoor and outdoor use
- solvent- and plasticizer-free
- water- and frost-resistant
- also suitable for "tile on tile" installation
- suitable for underfloor heating
- vapour-permeable

Technical data

- Coverage: approx. 200 to 400 g/m²
- Colour: pink pigment
- Drying time at 20°C: approx. 6-12 hours, depending on the substrate
- Application: roller, brush, paintbrush
- Storage: cool and dry, approx. 12 months
- Tool cleaning: with water
- Application temperature: from +5°C to +30°C

Substrate preparation
The substrate must be dry, load-bearing, free from grease residues, adhesives, cement milk and other contaminants that could impair the adhesion of the product to the substrate. Old layers of paint, epoxy, tar and asphalt must be removed. Plywood must be free from paraffin residues, roughened and cleaned with soapy water. New and old (repaired) concrete must be cured and matured. The substrate must not be frozen or covered with frost, and there must be no water pockets. Damaged or cracked substrates must be repaired. BEKATEQ Concrete Contact is not intended for substrate consolidation. If the substrate needs to be consolidated first, it must be pre-treated with the BEKATEQ BE-518 primer. In this case, wait for the primer to dry before applying the Concrete Contact.