BK-250EP 2K electrical potting compound, clear casting resin
Free shipping within Germany
Free returns
Description
High-quality 2K epoxy-based potting compound. The electrical potting compound has been extensively tested up to 1000V voltage. It can be used to pot and protect junction boxes, junction sleeves, junction enclosures, cable sleeves, and much more against dirt, water, moisture, dust, and other influences. Also suitable for insulating and potting circuit boards in enclosures.
Also suitable for refilling after changes or repairs. This extends the service life of electronic devices and makes them resistant to environmental influences. It also protects damaged cable sections.
Scope of delivery: For 2-component systems, the total weight consists of component A and component B. You receive the base component + hardener.
Mixing ratio: 10 parts component A : 6 parts component B
Do not pour more than 1cm per pass. When mixing partial quantities, always use a scale to weigh out the exact mixing ratio by weight.
Product advantages of the 2K electronics potting compound
- No tripping of a residual current circuit breaker due to moisture in junction boxes
- IP68 after curing
- Tested for 1000V voltage resistance
- Mechanically impact-resistant
- Insulates and protects against environmental influences
Application of the electronics potting compound: Mix components A and B with a mixer at moderate speed (450 rpm). Make sure not to incorporate too much air. Stir for 2 minutes, wipe down the container walls, transfer to another container, and stir for another minute. Let the mixture stand for a short while so that it de-aerates itself. Now use the material for potting.
Processing time
- Final strength after 12h curing: solid (IP68)
- Processing temperature: 10° to 30°
- Insulation resistance at 1000V after potting: > 4.7 MOhm
- Insulation resistance at 1000V after curing: > 9999 MOhm
Consumption example: To completely pot an empty 80x80mm junction box, approx. 300g of electrical potting compound is required!
Technical specifications
| Property | Value |
|---|---|
| Application | Mix and pour |
| Mixing ratio | 10 parts A : 6 parts B |
| Pot life | approx. 20-30 min at 20°C |
| Application temperature | +10° to 30° |
| Area of use | Interior |
| Recoatable after | approx. 12 hours at 20°C |
| Typical use | Junction boxes, cable junction sleeves, branch boxes, cable sleeves and more |
| Properties | Protects against dirt, water, moisture, dust and other influences, insulating and potting and more |
| Colour | Transparent |
| Gloss level | Gloss |
Recommended Layering
Areas of application
Frequently Asked Questions
Customers also bought
-
Mixing Tool SetBE-71W Mixing Cup Set with Brush, Stirring Rod, Scale and GlovesCHF 19.00 CHF 35.00 -
Epoxy resin potting compoundBK-250EP 2K electrical potting compound colored casting resinCHF 22.00 CHF 31.00 -
Color pigmentsBK-125 Color Paste Pigments for Epoxy Resin, PU Resin, Alkyd ResinCHF 21.00 -
PaintbrushBE-59W Brush Set for Paints, VarnishesCHF 4.00 CHF 15.00
