BK-300EP 2K epoxy resin balcony and terrace coating
Free shipping within Germany
Free returns
Description
2K Epoxy Resin Balcony Coating
2K epoxy resin floor coating for balconies, patios, garages, workshops, basements, industrial halls, stairs, and much more. Floor sealing and coating based on 2-component epoxy resin. The ideal balcony renovation solution, as it is affordable and easy to apply. Thanks to its fast drying time, balconies, patios, or stairs can be used again in just a few days.
Renovate and coat your flooring (including plinths) to make it resistant to summer and winter conditions. Available in RAL colors, this UV-stable, self-defoaming, and durable balcony and patio coating provides an optimal finish (no fish-eyes, craters, or depressions) and not only gives your floor a new shine but also reliably protects it from wind, weather, and water. In addition, the exterior coating is highly resistant to mechanical stress and chemicals, resistant to plasticizers, forms a hard surface, and even adheres to tiles.
Scope of Delivery & Application: 1. Mix the color paste / 2. add it to the epoxy resin and stir thoroughly / 3. add the hardener to the mixture and stir thoroughly again.
Recommended Build-up
1. BK-190EP 2K epoxy resin primer at approx. 300 g/m²
2. Sprinkle BK-705 quartz sand into the damp primer for improved adhesion promotion
3. BK-300EP 2K epoxy resin balcony coating at 300 g/m² per coat, applied with a roller; two coats are recommended
The final color coat must come from the same batch. Otherwise, color variations may occur.
Coverage/Consumption: Consumption depends on the substrate conditions (surface condition, absorbency, etc.) and the application method. The material can be applied thinly or very thickly. You should allow for at least 200 g/m² per coat. We recommend 2 coats. It is best to calculate based on 300 g/m² per coat. If you are planning a light or intense color such as red, green, etc., we recommend at least 2 coats with a minimum of 300–350 g/m² per coat. The final color coat must come from the same batch. Otherwise, color variations may occur.
Quality Pays Off
- Low odor, UV-stable, and self-defoaming
- Optimal finish - prevents the formation of potential "fish-eyes"
- For concrete, screed, cement, wood, metal, and tiles
- Impact-resistant, abrasion-resistant, and highly durable
- Suitable for high pressure loads
- Plasticizer- and chemical-resistant
- Binds dust and hardens the surface
- Application with a short-pile floor roller or brush
- Structural resin bonding of cracks, joints, and defects
Technical Specifications
- Mixing ratio: 10 parts resin / 6 parts hardener
- Working time [at 20°C]: approx. 35 min
- Load-bearing/Walkable/Recoatable: [at 20°C]: approx. 24 hrs (temperature-dependent)
- Final cure [at 20°C]: approx. 7 days
- Application temperature: min. 6°–10°C to max. 25°C
- Maximum residual moisture in cement screed substrate: < 2 CM-%
Technical specifications
| Property | Value |
|---|---|
| Coverage | approx. 300 g/m² per coat |
| Suitable for | Concrete, tiles, screed |
| 2-in-1 | Coating & sealing |
| Application | Roller, brush, squeegee, trowel |
| Application temperature | min. 6°-10°C to max. 25°C |
| Fully hardened | approx. 7 days at 20°C |
| Pot life | approx. 30-45 min at 20°C |
| Mixing ratio | 10 parts resin / 6 parts hardener |
| Gloss level | Glossy |
| Properties | Low odour, UV-stable and self-venting, optimal levelling - prevents the formation of depressions, impact-resistant, abrasion-resistant, heavy-duty, suitable for high compressive loads, resistant to plasticisers and chemicals |
| Substrate | Concrete, screed, cement, wood, metal, tiles |
| Typical use | Balcony, terrace, garage, workshop, stairs, entrance area, hall and more |
| Recoatable after | approx. 24 h at 20°C |
Recommended Layering
Areas of application
Frequently Asked Questions
Customers also bought
-
Epoxy resin primerBK-190EP 2K Epoxy Primer, Adhesion Promoter, Bonding PrimerCHF 34.00 CHF 47.00 -
Epoxy resin mortarBK-150EP Epoxy Resin Mortar Repair MortarCHF 23.00 -
Decorative chipsBK-130 Decorative Chips Color Chips for SprinklingCHF 15.00 CHF 31.00 -
Short-pile paint rollersBE-79W Short-Pile Paint Roller for Floor CoatingCHF 22.00 -
Painter's telescopic poleBE-77W Telescopic Pole for Paint RollerCHF 12.00 CHF 21.00 -
BE-18W Stirring Rod for Epoxy Resin, Paints, VarnishesCHF 12.00 CHF 21.00 -
Quartz sand broadcast aggregateBK-705 Quartz Sand Broadcast Aggregate for Non-Slip FloorsCHF 15.00 CHF 24.00
