D.80W Floor Adhesive for Parquet, PVC, CV, Vinyl and Carpet

Floor covering adhesive is suitable for parquet, PVC, CV, vinyl and carpet flooring, as well as wall coverings made of cork, linoleum, PVC, underlay wallpaper and thermal insulation materials. Also ideal for stair treads.

Product properties
- solvent-free (Giscode D1)
- short drying time (approx. 15 min.)
- high initial adhesion
- suitable for underfloor heating

Technical data
- Coverage: 1 kg for approx. 4 m²
- Application temperature: min. 15°C floor & 20°C air
- Walkable: after approx. 2 hours
- Load-bearing: after approx. 24 hours
- Final strength: after approx. 2-5 days
- Apply with notched trowel/roller

Consumption & Notching
- smooth (A1): approx. 3.0 m²/kg
- lightly embossed (A2): approx. 2.7 m²/kg
- textile textured (B1): approx. 2.5 m²/kg
- coarsely textured (B2): approx. 2.0 m²/kg

Substrate preparation
The substrate must be dry, clean and load-bearing. Remove waxes, oils and varnishes. Prime highly absorbent substrates. Level out unevenness. Old coverings must be firmly bonded and cleaned.

Application
Acclimatize material for 24 hours (min. 18°C). Cut the covering, fold back halfway, apply adhesive with notched trowel. After 10-15 min., lay down, rub in fully, repeat after 20 min. Observe the manufacturer's instructions.

For PVC/CV coverings, drying time 30-35 min. Walkable after 2 hours, load-bearing and weldable after 24 hours.

For wall coverings, underlay wallpaper & thermal insulation materials, keep the substrate dry, load-bearing & clean. Apply with A1 notched trowel, bond after 10-15 min. Further processing after 24 hours.

Storage & Disposal
Store cool & frost-free; shelf life 12 months. Recycle empty containers, return liquid residues to collection points, dispose of dried residues with household waste.