D.67W Nano facade paint with water-beading effect

Nano Facade Paint in a silk-matte finish with a water-beading effect, available in various colors. Also suitable as a plinth paint.

Your benefits

- highly water-repellent facade paint
- keeps the facade dry and durable against wind and weather
- is hard-wearing and forms a protective film
- highly lightfast and UV-resistant
- breathable and solvent-free
- ready to use and can be diluted with water as desired

Technical data

- Gloss level: silk-matte
- Color: various RAL colors
- Coverage: approx. 5-8 m²/l, depending on the substrate
- Cleaning tools: with water
- Overcoating: after approx. 4-6 hours at 20°C

Application temperature: min. 10°C; do not apply in high humidity or at temperatures above +30°C

Application
House facades, plinths, basement walls, concrete roofs, plaster, masonry, stone, cement, bricks, and much more. For all open-pored and mineral substrates.

The perfect application process
1. BEKATEQ BE-509 algae and moss cleaner for facades that need cleaning beforehand
2. BEKATEQ BE-516 facade primer, which equalizes absorption
3. DICHTON D.67W Nano Facade Paint
4. BEKATEQ BE-450 Nano Sealant, for an additional colorless protective film

Note: Try to work "wet-on-wet" as much as possible to avoid visible lap marks and achieve maximum coverage. The coating can generally be overcoated after 4-6 hours and is rain-resistant after 24 hours. An optimal water-beading effect can only be achieved with two coats.

Substrate preparation
Check the facade: before repainting, the facade should not only be checked for cracks and dirt. Hollow areas in the plaster, the adhesion and type of the old coating, the absorbency and chalking behavior of the old coating must also be considered.

Cleaning: sweep the facade and clean it with water and a brush. The substrate can also be prepared using a high-pressure cleaner. Clean heavily soiled facades beforehand with the BE-509 cleaner.

Repair cracks: all holes and cracks must be repaired beforehand.