BEKATEQ Deals 2026 - to the SALE%

BEKATEQItem no.: 182792966

LS-240 Wood Table Oil Set with Sanding Pad, Polishing Fleece Cloth & Brush

CHF 15.00RRP CHF 23.00-34%incl. VAT, plus shipping (CHF 30.00 /l)

Shipping cost: 4,95€ within Germany

Dirt & Water Repellent Very Economical Does Not Tear

Size: 0.5L

Recommended accessories
Secure payment Fast shipping 14-day returns
VISA PayPal Klarna Sofort

Description

Wood Table Oil

Product Data Wood Table Oil
- Nourishing wood protection
- Water- and dirt-repellent
- Enhances the wood's natural color
- Transparent with a honey tone
- Free from solvents, additives, resin and preservatives
- Easy to apply with excellent flow
- Breathable and highly penetrating
- Very economical coverage of 0.1–0.2 l/m²

Product Data Cleaning Fleece Cloth
- Extra soft and lint-free
- Largely solvent-resistant
- Highly absorbent and wet-strong

Technical Data Sanding Pad
- Fine sanding pad SC100 = P 220
- Ideal for working on curves, edges, recesses, radii and surfaces
- For dry and wet sanding

Product Data Flat Brush
- Pure natural bristles reinforced with synthetic bristles
- Highly abrasion-resistant for a long service life
- Allows for well-controlled application of the wood oil to the surface
- Rust-resistant ferrule
- Unpainted wooden handle

Application
The substrate should be dry, clean, degreased and absorbent. Application temperature: min. 10°C.
1. Clean the wood surface
2. Roughen with the sanding pad
3. Apply/spread the wood table oil with the included flat brush
4. Rub/buff the care oil in with the cleaning fleece cloth

Important
Avoid excess application or remove any excess after approx. 30 min. with the cleaning fleece cloth until the surface has a uniform satin finish.

Directions for Use

1. Clean the wood surface / 2. Roughen with the sanding pad / 3. Apply/spread the wood table oil with the included flat brush / 4. Rub/buff the care oil in with the cleaning fleece cloth

Technical specifications

Property Value
Area of use Indoor & outdoor
Consumption approx. 10 m²/l per coat
Application Brushing
Set contents Wood table oil, cleaning fleece cloth, sanding pad, flat brush
Drying time Recoatable after approx. 24 h
Properties Vapour-permeable, dirt- and water-repellent, excellent penetration, enhances the wood grain, gives light woods a warm honey tone, does not crack, very economical, can be touched up locally if damaged
Official EU notice: statutory warranty of at least two years for goods sold in the EU

Recommended Layering

1
Prepare the wood
Sand the wood surface (grit 120-180) and remove sanding dust. Remove old coatings completely.
2
1st oil application
Apply the oil thinly and evenly with a brush or cloth in the direction of the grain. After 15-20 minutes, wipe off excess oil with a lint-free cloth.
3
2nd oil application
After a drying time of at least 12 hours, lightly sand between coats (grit 240) and apply the second coat as described.

Areas of application

WorktopsWooden TablesWooden FurnitureIndoorOutdoor

Frequently Asked Questions

Customers also bought

LS-240 Holztisch Öl Set mit Schleifmatte, Putzvliestuch & Pinsel
BEKATEQ

LS-240 Wood Table Oil Set with Sanding Pad, Polishing Fleece Cloth & Brush

From CHF 15.00 CHF 23.00
Unit priceCHF 30.00 / l

Wood Table Oil

Product Data Wood Table Oil
- Nourishing wood protection
- Water- and dirt-repellent
- Enhances the wood's natural color
- Transparent with a honey tone
- Free from solvents, additives, resin and preservatives
- Easy to apply with excellent flow
- Breathable and highly penetrating
- Very economical coverage of 0.1–0.2 l/m²

Product Data Cleaning Fleece Cloth
- Extra soft and lint-free
- Largely solvent-resistant
- Highly absorbent and wet-strong

Technical Data Sanding Pad
- Fine sanding pad SC100 = P 220
- Ideal for working on curves, edges, recesses, radii and surfaces
- For dry and wet sanding

Product Data Flat Brush
- Pure natural bristles reinforced with synthetic bristles
- Highly abrasion-resistant for a long service life
- Allows for well-controlled application of the wood oil to the surface
- Rust-resistant ferrule
- Unpainted wooden handle

Application
The substrate should be dry, clean, degreased and absorbent. Application temperature: min. 10°C.
1. Clean the wood surface
2. Roughen with the sanding pad
3. Apply/spread the wood table oil with the included flat brush
4. Rub/buff the care oil in with the cleaning fleece cloth

Important
Avoid excess application or remove any excess after approx. 30 min. with the cleaning fleece cloth until the surface has a uniform satin finish.

Directions for Use

1. Clean the wood surface / 2. Roughen with the sanding pad / 3. Apply/spread the wood table oil with the included flat brush / 4. Rub/buff the care oil in with the cleaning fleece cloth

Size

  • 0.5L
  • 1L
  • 2.5L
View product